Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Hurst
If your gate motor won’t open, grinds when it runs, or stopped working after a rainstorm, here’s the straight answer: most gate opener problems in Hurst are repairable same-week, and the common culprits are clay-heaved posts and aging control boards, not the motor itself. Hal Gatewood has been fixing gates across Tarrant County since 2001, and he’ll tell you before he touches anything whether you’re looking at a $180 repair or a full replacement. Call (903) 829-4499 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Hurst’s Preferred Gate Motor & Opener Company
Hurst homeowners keep our number saved because we treat their gate the way we’d treat our own. Hal Gatewood’s name is on the shop, the address is published, and the license number is there for anyone to look up. That’s the kind of accountability you don’t get from a faceless operation working out of a call center three states away. When you call, the person who shows up is background-checked, uniformed, and rides with the same truck every week. You’ll see the same face at the hardware store you saw on your driveway.
Our Gate Motor & Opener crew works Hurst neighborhoods weekly, from the ranch homes around Bellaire Drive to the split-levels off Precinct Line Road. We know these gates. We know what the clay does to them. And we show up when we say we will, with a written price before we turn a single wrench. No games, no surprise invoice at the door.
Our Gate Motor & Opener Services in Hurst
Motor Installation
A new gate motor in Hurst runs $900 to $2,400 installed depending on gate weight, opener type, and whether we’re replacing an arm, a slide mechanism, or a full operator. Most homes here are older ranch or split-level builds with 40 to 60 year old gates, so installation often means cutting out the old post and setting a new one in a wider concrete collar below the clay line. Skipping that step is how you get a brand new motor that binds after the first wet season.
Motor Repair
Most gate motor repairs in Hurst run $180 to $450. The most common repair we handle in this city isn’t a dead motor. It’s an operator that lost its limit settings because the post moved an inch in the gumbo soil. We reset the post, shim the operator back square, reprogram the limits, and test the entrapment protection. Done in one trip, usually a couple hours.
Linear Motor
Linear actuators on swing gates are especially vulnerable to Hurst’s clay heave. When the hinge post tilts just a few degrees, the arm travels out of true and burns out switches or strips internal gears. We stock Linear parts for the older units still common in Hurst’s 1960s through 1980s neighborhoods, from the entry arms on Pipeline Road cul-de-sacs to the side-yard gates near Hurst Hills Elementary. If the actuator is rebuildable, we rebuild it. If not, we tell you straight before quoting the replacement.
Slide Motor
Slide gate operators across Hurst fight the same enemy: freeze-thaw cycles and expansive clay that shift tracks and rollers. Worn rollers from pre-2000 installs trip the safety sensor intermittently, which is why your gate stops halfway and reverses for no apparent reason. We replace rollers, re-square the track, and align the rack and pinion so the motor isn’t fighting the gate every cycle. We service DoorKing, Viking, and Linear slide operators most often in this city.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We’re certified to service nine gate opener brands, and the three we see most often on Hurst gates are DoorKing, Linear, and Viking. These are the workhorses from the 1980s and 1990s that are still running in subdivisions off Harwood Road and along Highway 26. If the control board died, we can often retrofit a modern board without replacing the whole operator. That saves real money on older units where the motor and gearbox are mechanically sound. We stock common boards, arms, rollers, and safety edges so Hurst customers aren’t waiting a week for parts.
Common Gate Motor & Opener Problems We See in Hurst Homes
- Post heave from gumbo clay. Hurst sits on Tarrant County’s expansive black-clay soil, which swells when wet and contracts when dry. Posts shift up to two inches a season, pulling operator arms out of alignment and tripping limit switches. The fix is resetting the post in a wider concrete collar, not swapping the motor.
- Dead control boards after hard freezes. The February 2021 ice storm and the hard freezes since then have killed more 1980s-era DoorKing and Linear boards than we can count. When a board loses it memory, the keypad resets and the gate forgets its limits. A retrofit board is often the cheaper answer than a full operator replacement.
- Worn slide gate rollers tripping safety sensors. Gates hung before current UL 325 safety standards use rollers that wear flat over 40 years. When a roller catches, the entrapment protection senses resistance and fails the gate safe. We replace rollers and re-square the track so the gate rolls clean.
- UV-degraded vinyl hardware and cracked arms. Hurst gets 100°F summers that bake plastic actuator housings and arms until they crack. Combined with winter freeze cycles, the hardware on older gates here degrades faster than the metal. We replace with current-spec parts built for North Texas weather.
Pricing for Gate Motor & Opener in Hurst, TX
Here are honest numbers for Hurst’s market. A standard gate motor repair runs $180 to $450, with the most common call being a limit reset after clay heave shifted a post. Rebuilding a Linear swing arm typically costs $250 to $500. Replacing a control board on a DoorKing or Viking unit runs $300 to $700. Full motor installation on a new or rebuilt gate is $900 to $2,400 depending on gate weight and opener type. Every quote is written and agreed before we start. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for a free estimate.
We Also Serve Cities Near Hurst
Our Gate Motor & Opener in Hurst work takes us all over the Mid-Cities. If you’re in Bedford, Euless, Grand Prairie, or Kennedale, the same crew shows up, the same written pricing applies, and the same 90-Day Done Right Promise stands. One call covers the whole area.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Hurst
The clay soil under your gate post swells when it rains and pushes the post out of plumb by as much as an inch or two. That tilts your operator arm just enough to bind against the gate. The fix is resetting the post in a deeper, wider concrete collar so it stops moving. Call (903) 829-4499 and we can check the post before you spend money on a motor you likely don’t need.
If the motor and gearbox are still sound, we can usually retrofit a modern control board for $300 to $700 instead of installing a new operator at $900 to $2,400. We do this regularly on older DoorKing and Linear units in Hurst. If the board is the only thing that failed, retrofitting is the honest answer. If the gearbox is also worn, we’ll tell you before quoting anything.
No, it’s almost always a post problem. The freeze heave cracked the concrete or shifted the post, which pulled the opener arm out of alignment. The motor is likely fine. We cut the old post out, pour a wider footing below the clay line, and re-hang everything square. That fixes the drag permanently. Call (903) 829-4499 for a free second opinion if another company quoted a new motor.
Your slide gate rollers are probably worn flat, or the track shifted from clay expansion. When a flat roller catches, the UL 325 entrapment protection reads the resistance and fails the gate safe. We replace the rollers, re-square the track, and realign the rack and pinion. That clears the intermittent tripping. Expect a repair in the $200 to $450 range depending on how many rollers need replacing.
You can add battery backup to most older operators from Linear, DoorKing, and similar brands built since the mid-1990s. That matters in Hurst, where hard freezes and spring storms knock out power regularly. A battery backup keeps the gate working when the grid is down so you’re not climbing out to manually release the arm. We can usually wire one in for $200 to $500 depending on the opener. Call for a firm quote: (903) 829-4499.
Call Gatewood Fence & Gate for Honest Gate Motor Work in Hurst
If your gate motor is grinding, binding, or dead, call Hal directly. You’ll get a live person, a straight answer, and a written price before any work starts. We fix gates other companies want to replace, and we stand behind every job with our 90-Day Done Right Promise in writing. Call (903) 829-4499 today for a free estimate in Hurst, TX.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hurst since 2001.