Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Mansfield
Gate repair in Mansfield usually comes down to one of two things: a footing that shifted in the Blackland Prairie clay, or an operator that lost its travel limits because of it. We fix both, same day in most cases, and Hal Gatewood has been doing it since 2001. The name is on the shop, and the shop is down the road. Call (903) 829-4499 and a live person answers, no voicemail, no phone tree.
Serving Mansfield means understanding what the soil does to a gate post out here. Heritage, South Pointe, Walnut Creek. We know these streets, the HOA finish rules, and the builder-grade operators that were undersized from day one. When your gate stops opening at 6:45 on a Tuesday morning, we’re the ones you want rolling up.
Why Gatewood Fence & Gate Is Mansfield’s Preferred Gate Repair Company
We’re locally owned and owner-operated, with a published address and a Texas license number anyone can look up. Hal Gatewood’s name is on every invoice, not a corporate logo. That matters in Mansfield, where HOA communities talk and a bad repair gets around fast. We’ve built our reputation one driveway at a time, fixing what other companies want to replace.
When you call, you’ll get Hal or one of his crew. Background-checked, uniformed, and familiar with Mansfield’s specific gate problems. Not a person reading a script three states away. We answer 24/7, and we mean it. A gate stuck open at midnight is a security problem, not something that can wait for business hours.
Our 90-Day Done Right Promise is stamped in writing on every job, not buried in fine print. If it’s not done right, we make it right. One call brings us back. No runaround, no arguing about what was or wasn’t covered. That’s the oldest accountability there is.
Our Gate Repair Services in Mansfield
Here’s the truth about gate repair in Mansfield: the problem usually isn’t the gate. It’s the post, the footing, or the operator fighting soil movement that was never accounted for when the house was built. We start where other companies stop. Here’s what we handle most:
Gate Realignment
Mansfield sits on Blackland Prairie clay that swells in wet winters and contracts in dry summers. Your double swing gates drift out of alignment, the latch stops meeting, and the operator throws a limit error. We dig down to the footing, reset the post with a deeper concrete collar, and re-sync the operator’s travel limits so the gate stays within spec even after heavy rain. A gate sags in the hinge post, not in the middle, and that is where we start.
Electric Gate Repair
When a LiftMaster or FAAC operator stops responding in Mansfield, heat is usually the accomplice. 100°F+ summers cook control boards that lack ventilation, and UV-degraded wiring on exposed conduit runs fails quietly. We stock parts locally for Mansfield customers and service all nine major brands, so you’re not waiting a week on a board from out of state. We also replace cracked conduit that has let moisture into the circuit board, which is what actually killed it.
Hinge & Post Repair
Heavy ornamental steel gates on undersized hinges wear out. In Mansfield’s HOA subdivisions like Heritage and South Pointe, the gate has to match the original finish and the post has to be plumb, or the HOA architectural committee will flag it. We weld on site, in your driveway, with materials matched to the original. Fix the panel without the post and you’ll fix it twice.
Automatic Gate Repair
Automatic gate repair in Mansfield usually starts with a line of questioning: when did it start, does it grind, does it drift, does it trip photo-eyes. We work through it systematically. Builder-grade operators installed on 2000s-era tracts fail early when they’re asked to move a gate that has been heaving for two seasons. We recalibrate, reinforce, and stand behind the work with the 90-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mansfield
We service LiftMaster, FAAC, BFT, and Linear, along with five other major gate operator brands. For Mansfield customers, that means we carry common boards, remotes, photo-eyes, and limit switches on the truck. You’re not waiting on a freight shipment while your gate sits open. If it’s a control board we don’t have, we’ll tell you before we start the work, not after. Honest upfront pricing, quoted and agreed before any work begins.
Common Gate Repair Problems We See in Mansfield Homes
These are the patterns we see in Mansfield, week after week. If one of these sounds like your gate, our Gate Repair team can walk you through it over the phone before we even roll a truck.
- Post footing heave from wet-dry cycles in Blackland Prairie clay. Ornamental steel gates tilt and bind against the operator’s gear rack. The fix is a reset footing with a deeper collar, not a shim.
- Builder-grade operators failing early in 100°F+ heat. Many were undersized from the day they were installed, and control boards without ventilation fail after three or four Mansfield summers. A properly vented, properly rated replacement lasts far longer.
- Missing buried conduit from original construction. Surface-mounted wiring across driveways tears loose during lawn care or vehicle traffic, killing power to slide gate operators. We run new conduit properly, below grade.
- Photo-eyes tripping or failing entirely after storms. HOA communities in Mansfield require photo-eyes for safety code compliance. When moisture or misalignment trips them, the gate won’t close. We realign, seal, and test.
Pricing for Gate Repair in Mansfield, TX
Here’s what Mansfield homeowners can expect to pay, based on the work we do out here:
- Gate realignment on a double swing gate: $220-$450, depending on post condition and whether we’re re-setting one or both footings.
- Operator limit recalibration or travel-limit sensor replacement: $150-$310.
- Hinge replacement with on-site welding, matched to existing finish: $180-$380 per hinge set.
- Electric gate operator repair (board, capacitor, or wiring): $240-$575.
- Full operator replacement on a single swing gate: $900-$2,200, installed.
- Control board replacement for LiftMaster or FAAC: $210-$470, including labor.
Every price gets quoted and agreed before we start work. No trip charge inside the county. $40 off any repair over $200. Free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for an exact quote. Estimates are free.
We Also Serve Cities Near Mansfield
We work in Arlington, Kennedale, Cedar Hill, and Duncanville regularly. The soil changes, the HOAs change, but the standard of work doesn’t. If you’re just outside Mansfield and wondering if we’ll come out, call and ask. We’ll tell you straight, and there’s no trip charge if you’re inside the county.
Serving Mansfield, TX - Our Local Coverage Area
We’re based in the Mansfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Mansfield
Because your gate post is sitting in Blackland Prairie clay. When that clay gets wet, it swells. When it dries, it contracts. The post moves a fraction of an inch, and at the end of a 14-foot gate leaf, that fraction becomes an inch and a half. The operator’s travel limits then read the gate out of spec and throw an error. We fix it by digging down to the footing, setting the post with a deeper concrete collar, and re-syncing the operator’s travel limits. Call (903) 829-4499 and we’ll come look at the footing before it gets worse.
Yes. In Mansfield’s HOA-governed master-planned communities like Heritage and South Pointe, architectural standards require repairs to match the original finish on ornamental steel and wrought iron. We weld on site and match the finish, whether it’s powder-coated, painted, or bare steel that gets primed and top-coated to spec. We’ve done enough work in Mansfield to know what the committees look for.
If your gate is controlled by an operator and a child, a delivery driver, or a car can be in the path of the gate leaf, you need working photo-eyes or an equivalent entrapment protection system. In Mansfield, HOA communities and city code require them on automated gates. We test them on every automatic gate repair, and we replace non-functional units rather than bypassing them. A gate that closes on its own without a working safety sensor is a liability, not a convenience.
Yes, and it’s common. Many older subdivisions in Mansfield were built with manual ornamental gates, and homeowners later want them automated. We assess the post, the gate weight, the power run, and the required safety devices, then quote a full installation with a written price. The power run and safety edges are included in our scope of work, not billed as extras later. Measuring, ordering, and scheduling takes a few days, so this is a planned install, not a same-day call.
Uri froze solenoids and cracked PVC conduit on automated gate operators across Mansfield’s newer subdivisions simultaneously. When water gets inside conduit and freezes, it expands and splits the pipe. Then moisture follows and does what moisture does to circuit boards. We now stock cold-weather operator conversion kits and carry conduit repair supplies on the truck specifically because of what Uri taught us. Before the next freeze, we can inspect your set up and harden what needs hardening. Call (903) 829-4499 and we’ll schedule it.
Call Gatewood Fence & Gate in Mansfield, TX
What we were called to do in Walnut Creek, we’ve done dozens of times across Mansfield. A LiftMaster swing gate operator kept throwing a limit error every time the double gates drifted out of alignment. Our crew dug down to the hinge post footing, found the post heaving from expansive clay, and reset it with a deeper concrete collar before re-syncing the operator’s travel limits. We also replaced the cracked conduit run to the operator that had let moisture into the circuit board. Now the gate stays within spec even after heavy rain.
Show me the gate closing on its own and I’ll show you where it’s failing. That’s how we look at work in Mansfield. Not as a part to swap, but as a system that’s either built right or it isn’t. We repair what other companies want to replace. Weld on site. Stand behind it in writing. And answer the phone when you call.
Call (903) 829-4499 for a free estimate. A live person answers, 24/7. We’ll give you a straight answer, a written price, and the 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mansfield and surrounding communities since 2001.