Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Grand Prairie?
Our Gate Parts & Welding services in Grand Prairie typically range from $150 to $450 for standard onsite work, while more complex structural gate repairs or full hinge-post replacements can run between $500 and $900. Because we offer mobile welding and onsite fabrication, we can often fix your gate in a single visit without needing to haul it back to the shop, which keeps your costs predictable and your gate secure.
When your gate starts dragging across the driveway or the latch stops lining up, you don’t need a salesperson knocking on your door to sell you a new system. You need someone with a welder and a truck who knows why Grand Prairie soil shifts the way it does. I’m Hal Gatewood, and at Gatewood Fence & Gate, we’ve been fixing what other companies try to replace since 2001. We don’t believe in “gate replacement” until it’s actually necessary, and our 90-Day Done Right Promise is there to make sure the job holds up.
Gate Parts & Welding Cost Breakdown (2026)
Pricing for gate repairs in North Texas depends heavily on the type of material and the severity of the structural failure. We see a lot of issues in Grand Prairie related to our clay-heavy soil, which shifts and settles, causing posts to lean and hinges to bind. Below are the typical price ranges you should expect for professional onsite service in our area.
| Service Type | Estimated Cost Range |
|---|---|
| Minor Onsite Welding (Hinge/Latch repair) | $150 - $275 |
| Structural Reinforcement (Bracing/Truss adjustment) | $300 - $550 |
| Hinge Post Reset or Replacement | $450 - $850 |
| Gate Opener Arm/Mount Re-welding | $250 - $400 |
| Custom Fabricated Brackets & Hardware | $200 - $400 |
These numbers assume standard residential gate configurations. If your gate has been damaged by a vehicle or extreme weather, or if the internal post structure has completely rotted out, the cost may adjust accordingly. We provide upfront pricing, so you won’t be surprised by a bill that looks different from the estimate we gave you over the phone. If you have a written estimate from another company, we are happy to provide a free second opinion so you know exactly what you’re paying for.
What Affects Gate Parts & Welding Pricing in Grand Prairie
Not every gate repair is the same, and in a town like Grand Prairie, the geography matters. We see different wear patterns in the older neighborhoods near downtown compared to the newer builds further out toward the lake. Here is what actually drives the cost of your repair:
- The “Pivot Point” Failure: Most people think a dragging gate is a middle-of-the-gate problem. It’s actually a hinge-post problem. If we have to dig out and reset a post due to shifting soil, the labor cost increases because it requires concrete work and time for the setting, not just a quick weld.
- Material Type: Welding steel is straightforward, but working with decorative wrought iron or aluminum requires different skill sets and equipment. Steel gates are heavy and often require structural bracing, which adds to the fabrication time.
- Accessibility: If your gate is tucked into a tight space or surrounded by landscaping that prevents us from getting our welding rig close, we have to spend more time setting up safe barriers and extending leads.
- Hardware Quality: We stock parts for nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Using high-quality, manufacturer-specific hardware costs more upfront than generic parts, but it keeps the gate from breaking again in six months.
- Urgency: While we aim for efficient, same-day service whenever possible, emergency work or after-hours calls require more logistical coordination. Because we answer our own phones 24/7, we can often schedule you without the “middleman” delay.
Safety and Professional Standards
I see a lot of “DIY” repairs in Grand Prairie that end up costing the homeowner twice as much when they finally call me. A gate is a heavy, moving object. If you have a high-tension spring or a gate operator that isn’t closing properly, it is a significant security risk and a physical hazard. Please, do not try to weld a gate while it is still hanging on the hinges or adjust high-voltage gate openers if you aren’t trained for it. You can get hurt, or you can damage the expensive internal components of your motor. If your gate is acting up, leave the heavy lifting and the electrical work to a professional who carries insurance and knows the local codes.
How to Save on Gate Parts & Welding
You don’t need a coupon to get a fair price, but we do believe in rewarding our neighbors. We want to be the shop you call once and never have to worry about again. Here is how you can keep your repair costs manageable:
- Use Our Standard Discounts: We offer a permanent 10% discount for seniors and veterans. If you are in either of these groups, just let us know when you call.
- Bundle Repairs: If your gate needs a weld, check your hinges and your operator mounts at the same time. We offer $40 off any repair over $200, so it’s often cheaper to fix two small issues in one visit than to pay for two separate service calls.
- Get a Free Second Opinion: If a national franchise told you that you need to replace your entire gate system for thousands of dollars, call us at (903) 829-4499 first. We specialize in repairing what others want to replace. If it can be fixed, we will fix it.
- No Trip Charges: We don’t believe in charging you just to drive to your house if you are inside the county. We are locally owned and owner-operated, and we keep our overhead low so we can pass those savings on to you.
FAQs - Gate Parts & Welding Cost
How much does it cost to weld a broken gate hinge in Grand Prairie?
Minor onsite welding for a single hinge typically costs between $150 and $275, depending on the thickness of the steel and the accessibility of the post. We can often handle this in a single visit, ensuring the gate hangs level and closes smoothly without binding. Call (903) 829-4499 to get an exact quote for your specific gate setup.
Is it cheaper to repair a gate or replace it?
In 90% of the cases we see, it is significantly cheaper to repair a gate than to replace it. A full replacement can cost thousands, while most structural repairs, even those requiring new steel or custom bracing, rarely exceed $900. We always try to salvage the existing structure first because the name on the shop is mine, and I stand behind the work with our 90-Day Done Right Promise.
Can you fix my gate today?
We do our best to provide same-day or next-day service for urgent gate repairs in Grand Prairie. Because I answer the phone personally 24/7, you won’t get stuck in a queue or waiting on a callback from a call center. Give us a call, and we will let you know exactly when we can be out to take a look.
Do you charge for estimates?
We do not charge for estimates on gate repairs. If you have a written estimate from another company, we are happy to review it for free and give you a second opinion. Our goal is to provide honest, upfront pricing so you know exactly what the job entails before we start.
What brands of gate parts do you service?
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether it is an issue with the motor, the control board, or the physical gate structure, we have the experience to fix it right the first time.
Pricing reflects the Grand Prairie market as of 2026. Gatewood Fence & Gate offers free estimates - call (903) 829-4499.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie since 2001.
What Our Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks