FAAC Gate Installation Nationwide | Gatewood Fence & Gate

FAAC Gate Installation in Grand Prairie: What to Know First

FAAC gate installation in Grand Prairie runs somewhere between $900 and $2,800 for most single and double driveway gates, depending on the operator model and whether we’re working with an existing gate or hanging a new one. We’re an independent FAAC service provider, not a factory shop, so we pick parts based on what actually holds up in North Texas weather, not what the catalog says should work. Turnaround is usually three to five business days once we’ve looked at your site and you’ve approved the written price. If you’re tired of guessing whether your FAAC operator is even worth installing, call Hal at (903) 829-4499 and we’ll walk through what you have before anybody touches a wrench.

Call (903) 829-4499

How FAAC Products Fail - and How We Fix Them

• FAAC 400 and 402 operators losing their limit settings. These are common on older Grand Prairie homes, and nine times out of ten the culprit is a worn encoder or a control board that’s been cooked by a summer that never let up. We don’t just reprogram the limits and send you on your way. We check the encoder housing for moisture, confirm the board is still holding settings, and replace only what’s actually failed. When Hal’s truck is in the neighborhood, the fix is in the driveway, not in a shop three counties over.
• FAAC S418 and S450 swing operators grinding or hesitating mid-stroke. That hesitation is usually a release mechanism that’s partially engaged or a worn worm gear that’s been running dry. Homeowners tell us the gate “shudders.” We’ve seen it enough to know exactly where to look first. The fix is pulling the operator cover, cleaning and regreasing the gear train with the right spec, and testing the release handle seven or eight times before we call it done.
• FAAC hydraulic operators (the 750 and 770 series) weeping fluid or running slow in cold snaps. This is a North Texas reality: the seals on these older hydraulic units shrink when temperatures drop, and the fluid thickens. In Grand Prairie’s freeze-thaw winters, that means a gate that moves like molasses in January. We check the reservoir level, swap the perished O-rings, and bleed the system. If the piston itself is scored, we’ll tell you straight that a rebuild isn’t worth it and quote a replacement operator instead. We won’t patch a scored piston and pretend it’s fine.
• FAAC photo eyes and safety edges triggering false reversals after a hard rain. Around Grand Prairie, storm runoff and irrigation overspray collect in low spots along the fence line, and older FAAC safety devices aren’t sealed the way newer ones are. When water gets into the wiring, the control board sees a phantom obstruction and the gate refuses to stay closed. We chase it down with a meter, replace the corroded connectors with sealed ones, and reroute the wire out of the wet zone. That’s a fix, not a workaround.
• FAAC control boards (the E024 and the newer E045) throwing error codes after a lightning storm. North Texas gets real lightning, and a nearby strike will walk right down an ungrounded fence and into the operator. The board goes into fault mode and the gate locks up. We ground the operator properly, add a surge protector to the supply side, and only then clear the fault and test. If the board is fried, we tell you before we order parts. Bad grounding is the reason half of Grand Prairie’s FAAC failures happen twice.

Our FAAC Gate Installation Process

1. 1
   You call, Hal or one of his crew answers. No phone tree, no voicemail at 2 a.m. We ask where the gate is, what the operator’s doing (or not doing), and whether the gate is a swing or a slide. Within the county, the trip charge doesn’t exist.
2. 2
   We come look at the site. We check the hinge posts, the ground level, the operator mounting points, the existing wiring, and the access point for power. We’re looking for why the old installation worked or didn’t.
3. 3
   We quote a written price before any work starts. The number you see is the number you pay. No discovery fees, no “we found something else” at the door. If we find a broken hinge post while working, we stop and call you. The price doesn’t move without your say-so.
4. 4
   We install the operator and all associated hardware. OEM FAAC parts when warranty matters, quality aftermarket when the OEM part is known to be the weak link in North Texas conditions. We weld on site where we need to, so your gate stays in your driveway.
5. 5
   We test the gate like we don’t trust it. Twenty full cycles, safety edge checks, photo eye reversal tests, force limits. Then we adjust until it closes with authority and reverses without hesitation.
6. 6
   We hand you the written 90-Day Done Right Promise. If it’s not done right, one call brings us back. No fine print, no “within normal wear and tear” clause that quietly eats the guarantee.

What FAAC Gate Installation Costs in Grand Prairie

• FAAC swing gate operator installation (single gate): $900 to $1,600, depending on operator model and whether we’re running new power.
• FAAC slide gate operator installation: $1,400 to $2,200, plus gate hardware if the track and rollers need replacing.
• Double swing gate installation with two operators: $1,700 to $2,800 for most residential setups in Grand Prairie.
• Pedestrian gate with FAAC keypad or card reader: $700 to $1,300, including the post-mounted access control wiring.

The big price movers are existing electrical availability, gate weight and condition, and whether the old hinges or track are worth keeping. We’ll tell you before we touch anything. Call (903) 829-4499 for a free estimate, and if you have a written quote from another company, bring it to us. We’ll give you a second opinion on it for free.

Why Grand Prairie Homeowners Call Gatewood Fence & Gate for FAAC Work

Hal Gatewood has been working on gates around Grand Prairie since 2001, and most folks near Dalworth Park know his truck on sight. In a town this size, you run into the same people at the hardware store, and the man’s name is on the shop and on every invoice. We stock parts and know the FAAC weak points that the factory manuals don’t mention, because we see them in real driveways every week. We also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so when a homeowner’s tired of fighting an operator the manufacturer won’t stand behind, we can tell them straight what the honest options are. The 90-Day Done Right Promise is written on every job. The person who answers the phone at 3 a.m. is a person, not a recording. That’s the oldest accountability there is, and it’s still how we run the shop.

FAQs