Linear Gate Motor & Opener Nationwide | Gatewood Fence & Gate

Linear Gate Motor & Opener in Grand Prairie: What to Know First

We repair and install Linear gate motors and openers across Grand Prairie, and most jobs are done the same day we show up. A typical Linear opener repair runs $180 to $340 for common failures like bad limit switches or capacitor trouble, while a full motor replacement usually lands between $650 and $1,100 depending on the model and whether we’re reusing your existing arms and brackets. The price is quoted and agreed before any work starts, so there’s no surprise waiting at the end. This page is for homeowners in Grand Prairie who own a Linear gate and want straight answers about what’s wrong, what it costs, and whether it’s worth fixing. Call (903) 829-4499 and a live person answers, day or night.

Call (903) 829-4499

How Linear Products Fail - and How We Fix Them

Linear built a lot of the slide gate operators still running in Grand Prairie neighborhoods like Dalworth Park and Westchester, and we see the same failures repeat across their older ACT and newer LRA series. Here’s what we actually find:

• ACT 34B slide operators with dead limit cams. The ACT series is workhorse material, but the mechanical limit cams wear down over years of slamming against the same stop. The gate drifts past its stopping point or reverses mid-travel. We replace the cam assembly and reset travel limits, which beats buying a whole new operator by several hundred dollars.
• LRA series boards that stop talking to the remote. Linear’s LRA and DRA receiver boards are sensitive to the Texas heat inside a metal cabinet in August. The board overheats, drops receiver function, and the remote quits. We test the board in place, replace it with OEM when it’s cooked, and reposition the cabinet for better airflow so it doesn’t happen again in ten months.
• Capacitor failures on single-phase swing motors. Linear swing arms like the SW series rely on a start capacitor that degrades in Grand Prairie’s clay-heavy soil zones, where fencing and gates get more vibration from shifting ground. The symptom is a gate that hums but won’t move. That’s a $40 part and an hour of labor, not a new motor.
• Photo eye misalignment from fence post drift. North Texas soil expands and contracts with rain and drought, and concrete gate posts move. The photo eyes wired to a Linear opener lose alignment and the gate refuses to close. We re-square the posts where needed and realign the eyes, then test the full safety loop.
• Battery backup boards that stop holding charge in swing operators. Linear’s battery-ready units use sealed lead-acid batteries that cook in direct sun. A unit that works on AC but dies the second power cuts has a backup battery that hasn’t been checked in years. We swap the battery and test the charge circuit. It’s a fast fix most folks don’t know about until an outage leaves the gate stuck.

Our Linear Gate Motor & Opener Process

Every Linear job in Grand Prairie follows the same order, whether it’s a repair or a replacement:

1. 1
   You call, a live person answers. You tell us what the gate is doing. Hal’s phrase on this hasn’t changed in years: “Tell me what it’s doing, and I’ll tell you what it needs. No runaround.”
2. 2
   We show up and diagnose in your driveway. The gate stays put. We test the motor, the board, the limits, and the safety eyes before touching anything.
3. 3
   We give you a written price. OEM Linear parts when the warranty matters, quality aftermarket when the OEM price doesn’t make sense for an older unit. You know the difference and why before you spend a dollar.
4. 4
   We do the work on site. That includes any welding the job needs, since a gate that sags in the hinge post gets fixed at the hinge post, not with a motor that has to muscle through the sag.
5. 5
   We test everything in front of you. Full open and close cycles, safety reversal, remote range, and battery function if you have it.
6. 6
   You get the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No runaround, no fine print.

What Linear Gate Motor & Opener Costs in Grand Prairie

Here’s what we charge for common Linear work in Grand Prairie, quoted before we start and honored to the penny:

• Capacitor replacement (SW series or similar): $120-$180
• Limit switch or cam replacement (ACT series): $160-$240
• Receiver board replacement (LRA/DRA series): $220-$350
• Photo eye realignment or replacement: $90-$160
• Full swing motor replacement (entire operator): $650-$900
• Full slide operator replacement (ACT series): $800-$1,100

What moves the price is parts availability, the age of your particular Linear model, and how much re-welding the post or bracket needs. Estimates are free, and there’s no trip charge inside the county. We also offer a free second opinion on any written estimate you’ve already got from another company, because Grand Prairie homeowners shouldn’t have to guess who to believe.

Why Grand Prairie Homeowners Call Gatewood Fence & Gate for Linear Work

Hal Gatewood has been fixing gates in Grand Prairie since 2001, and most folks around Dalworth Park know his truck on sight. He learned the welding and mechanical side of the trade at Tarrant County College’s vocational program before going out on his own, and he built this company because he kept running into homeowners left with gates that didn’t work right. Bad welds, wrong hardware, operators installed without reading the spec sheet. It bothered him then and it bothers him now.

We’re an independent Linear service provider, not an authorized dealer, which means we answer to you, not a manufacturer’s quota. We service eight other major brands including LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your gate situation changes, we’re not going to shrug and walk off. Every job comes with the 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.

FAQs