Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Kennedale
Gate access control in Kennedale means keypads, phone entry, card readers, and video intercoms that work every time you pull up to your driveway. Most Kennedale calls we run involve systems on acreage-style lots where the gate sits at the end of a long private drive, often 200 feet or more from the house. When that keypad stops responding or the intercom goes silent, you’re not just inconvenienced; you’re locked out of your own property. We answer live and we get to Kennedale fast. Call (903) 829-4499 and you’ll talk to a person who knows this area’s gates, not a phone tree.

Here’s what you need to know up front: a keypad replacement in Kennedale typically runs $225-$485, a phone entry or video intercom system runs $650-$1,400 installed, and full smart access integration with an existing operator usually lands between $900 and $2,200 depending on wire runs and gate type. The price is agreed before we start, always. No surprises at the door.
Why Gatewood Fence & Gate Is Kennedale’s Preferred Gate Access Control Company
Hal Gatewood has been repairing and automating gates since 2001, and his crew handles Kennedale calls the way a neighbor would: show up on time, fix the actual problem, and stand behind the work. We’re not a franchise with a rotating cast of subcontractors. The person who answers the phone is the same person whose name is on the shop, and if you want to see who you’re dealing with, our address is published and you’re welcome to stop by.
Kennedale homeowners have put up with enough sloppy work over the years. We routinely find gates that were installed without proper post footings or safety sensors, and we’ve been called out to fix access systems that another outfit “repaired” by slapping on a new keypad while ignoring the binding operator that caused the failure in the first place. That’s the work that annoys Hal the most. Every job we do carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back, no runaround.
Calls are answered by a live person 24 hours a day, seven days a week. Not a voicemail, not a call center three states away. When your gate access fails at 6:00am on a workday, you get a human who can dispatch a crew to Kennedale that morning.
Our Gate Access Control Services in Kennedale
This page covers what we actually do for Gate Access Control on Kennedale properties. On the high-end custom gates around here, the access hardware has to match the gate’s weight, swing arc, and power draw. A palm-sized keypad wired to a 900-pound ornamental iron gate needs a proper relay and a loop detector that won’t false-trigger. Here’s how each system breaks down.
Video Intercom
Video intercom is the service we run most often on Kennedale’s larger custom properties. When your gate sits 300 feet from the front door, you need to see and talk to whoever is at the driveway before you let them in. We install and service video intercom systems that tie into your phone, a wall monitor, or both. On gates with existing LiftMaster or FAAC operators, we integrate the intercom with the operator’s existing limit switches and safety loop so the “open” command actually opens the gate every single time. A typical video intercom installation in Kennedale runs $850-$1,500 depending on wire length and whether we’re trenching for new cable or using existing conduit.

Keypad Entry
Keypads are the most common access control request in Kennedale, and the most common reason they fail is not the keypad itself. The Blackland Prairie clay under this city expands when wet and shrinks when dry, which shifts gate posts out of plumb. The operator then struggles, the travel limits drift, and the keypad gets blamed when the real culprit is a hinge post that moved an inch over winter. We fix the post first, then rebuild the access system on a solid base. A standalone keypad replacement runs $225-$485, and if we’re tying it into an existing operator with a new relay and loop detector, expect $600-$900.

Phone Entry
Phone entry systems let you buzz open the gate from your smartphone or a landline, no remote needed. On Kennedale’s acreage properties, we frequently see phone entry installed on gates that predate the city’s annexation of those parcels. That means the original wiring was never permitted, and adding a modern phone entry controller often requires us to flag the job for a code compliance review before we can legally finish the repair. We’ll tell you that on the first visit, not after we’ve already pulled wire. Phone entry installs in Kennedale typically run $650-$1,100 installed.

Card Reader
Card and fob readers are growing on Kennedale properties with multiple drivers, ranch staff, or rental tenants on the same parcel. We install proximity readers that integrate with most operators and can stack multiple credential types on the same controller. The hardware itself is straightforward; the real work on Kennedale lots is running the low-voltage line from the reader to the operator box without cutting across a driveway or disturbing mature landscaping. Budget $400-$750 for a properly installed card reader with a controller and relay, plus wire run costs if the gate is far from the power source.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We’re certified to service nine major gate brands, and on Kennedale’s custom gates we most often work on Linear, Viking, and DoorKing operators. We stock common parts for these systems locally, which means a dead Viking keypad or a DoorKing loop detector doesn’t leave you waiting on a week-long parts shipment. If you have a Linear operator that’s reversing mid-cycle or a Viking control board that’s throwing error codes, we can typically get it diagnosed and repaired the same visit. You don’t need to rip out a perfectly good operator because one relay failed. We fix what’s broken.
Common Gate Access Control Problems We See in Kennedale Homes
- Clay soil heave knocks the gate out of plumb. Kennedale sits on expansive Blackland Prairie clay, and the feast-or-famine rainfall cycle here means posts shift every season. When the hinge post leans, the operator’s travel limits go off, and the keypad or remote stops opening the gate all the way. The fix starts at the post, not the circuit board.
- Unpermitted pre-annexation wiring creates code surprises. Many gate access systems along Dick Price Road and Sublett Road were built on former unincorporated Tarrant County ranchland and never saw a permit. When we add a keypad, intercom, or smart controller to one of these systems, Kennedale’s building department may require the entire installation be brought to current code, including safety photocells and proper operator grounding, before we can legally complete the job.
- Aged pipe-rail ranch gates upgraded to motorized slide gates bind under seasonal soil movement. Those old ranch gates were built for a chain and a padlock, not a motor and a rack. When someone automates one without pouring a proper post footing, the rack and pinion binds after a wet winter and strips teeth off the rack. Then the gate stops halfway and the homeowner thinks the remote is dead.
- Outdated loop detectors fail to register modern vehicles. A lot of Kennedale driveways still have in-ground loop detectors that were tuned for steel-body cars from the 1990s. Modern aluminum and composite vehicles don’t trip them reliably, so the gate ignores the exit command and the owner is stuck backing up 200 feet to try again. We replace old loops with modern detectors or photoelectric sensors that don’t care what your car’s made of.
Pricing for Gate Access Control in Kennedale, TX
Here’s what you can expect to spend in Kennedale’s current market. A basic keypad replacement runs $225-$485. A phone entry system installed runs $650-$1,100. Video intercom systems with app integration run $850-$1,500 depending on wiring distance and whether we’re trenching new conduit. Full smart access integration with an existing operator including relays, loop detector, and programming runs $900-$2,200. If your gate lacks a proper post footing or sits on shifting clay, the post reset work is additional and priced after we measure the movement on site. Every quote is written, agreed to before work starts, and carries the 90-Day Done Right Promise. Seniors and veterans get a permanent 10% discount, and we take $40 off any repair over $200. Estimates are free, and there’s no trip charge inside the county. Call (903) 829-4499 and we’ll give you a real number.
We Also Serve Cities Near Kennedale
Our crews cover Gate Access Control in Kennedale and the surrounding Tarrant County cities including Arlington, Mansfield, Hurst, and Grand Prairie. If you’re just outside the city line on a county road, call us anyway. We schedule from our Dallas-Fort Worth office and run Kennedale calls daily. You’ll get the same live answer and the same written pricing guarantee.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Kennedale
Yes, it can. If your gate was built on former unincorporated Tarrant County ranchland, the original installation may never have been permitted, and adding new access hardware triggers a code review by Kennedale’s building department. We’ll check the property’s permit history before we quote the work, and we’ll tell you exactly what’s required. Call (903) 829-4499 and we’ll run that check for you.
In Kennedale, the cause is almost always a shifted hinge post from clay soil heave, not a programming error. When the post moves, the operator’s travel limits are off and the gate binds mid-cycle, which makes the safety system reverse the gate. Reprogramming the keypad doesn’t fix the post, and you’ll be back in the same spot next season. We diagnose the post movement first.
Yes, we do that regularly on Kennedale’s custom and semi-custom gates. We tie the intercom into the LiftMaster’s existing limit switch circuit and safety loop so the open command works consistently. If the gate’s hinge post is out of plumb, we address that before programming the intercom, because the best intercom in the world won’t fix a binding gate. Call (903) 829-4499 for a written quote.
Automatic gates in Kennedale must meet UL 325 safety standards, which means they need properly installed and aligned safety photocells, contact edges on the gate and posts, and an operator with current-sensing reversal. Many pre-annexation gates around Dick Price Road and Sublett Road lack these entirely. Adding access control hardware to one of those gates means bringing entrapment protection up to code as part of the job. We won’t skip it, and we’ll verify every sensor before we leave.
Yes. Many Kennedale driveways run 200 to 400 feet from the house, and running line voltage out to the gate isn’t always practical or affordable. We install and service solar-powered access systems on Viking, Ghost Controls, and Mighty Mule operators, sized for the gate’s weight and the shade patterns on your specific lot. Solar systems in tree-shaded areas need larger panels and bigger batteries, and we’ll spec that correctly from the start. Call (903) 829-4499 for a free assessment.
We’ve worked gates off Sublett Road where a custom ornamental swing gate was drawing excessive amps because a hinge post had shifted, and the phone entry system wouldn’t reliably trigger the loop detector. We reset the post footing, installed a new FAAC swing gate operator, secured a Viking video intercom with keypad entry, and verified the safety photocells under UL 325 before leaving the driveway silent and smooth. That’s the kind of job we do in Kennedale, and that’s the kind of fix we stand behind for 90 days, in writing. If your gate access needs a real diagnosis and a repair that holds, call (903) 829-4499. You’ll get Hal’s crew, a live person on the line, and a price that’s agreed to before we touch a wire.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kennedale and surrounding Tarrant County communities since 2001.



Before
After
Before
After
Before
After