Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Arlington, TX | Gatewood Fence & Gate
We’re Gatewood Fence & Gate, an independent Ghost Controls service provider offering Gate Repair in Arlington since 2001. If your Ghost Controls gate stopped working, we’ll come out, find what’s actually wrong, and fix it in your driveway – not haul it off to some shop. The difference here in Arlington is the soil: our black clay heaves with every wet season, and that one fact explains more Ghost Controls failures than any other. Call (903) 829-4499 and tell us what it’s doing – we’ll tell you what it needs.
Why Arlington Residents Choose Us for Ghost Controls Service
Hal Gatewood has been handling our Gate Installation in Arlington and repairs since before half these HOA communities finished building out. Most folks around Dalworth Park know his truck on sight, and he picked up the welding and mechanical side of the trade at Tarrant County College’s vocational program before going out on his own. That matters when you’ve got a Ghost Controls opener that’s been fighting Arlington’s clay soil for 20 years. We know these units the way a mechanic knows a particular make of truck – which parts fail, when they fail, and whether an aftermarket upgrade will outlast the factory replacement.
We service all nine major gate brands, but Ghost Controls has its own quirks. The limit switches, the control board caps, the nylon gears in the AXP1 and TDS2XP – each one has a failure pattern we’ve seen dozens of times in Arlington’s heat and freeze cycles. We stock factory Ghost Controls parts for warranty-adjacent repairs, plus upgraded sealed limit switches and high-temp gear grease for our climate. And we answer the phone with a live person, 24/7. No voicemail, no call center three states away.
Common Ghost Controls Gate Repair Problems We Solve in Arlington
- Limit switch assemblies packed with black-clay dust. Arlington’s dry, windy summers blow fine grit into everything, and Ghost Controls limit switches are magnets for it. Your gate stops mid-travel or reverses for no reason. We clean and replace with sealed aftermarket switches that hold up better than factory in this dirt.
- Control board capacitor failure after hard freezes. North Texas freezes come suddenly, and most Arlington homeowners never winterize their Ghost Controls keypads or hydraulics. After a cold snap, we see bulged caps and corrosion-damaged traces. We replace just the failed components rather than selling you a whole new board.
- Thermal binding in midsummer heat. When it hits 105°F, metal gates expand and Ghost Controls swing arms bind against their racks. The nylon internal gears on AXP1 and TDS2XP models strip clean. We re-shim the arms, re-grease with high-temp compound, and replace stripped gears.
- Chain drive stretch on older slide gates. Those 20 to 30-year-old Ghost Controls chain drives in communities around Viridian and Parks at Arlington run on timers 24/7. Chains stretch, jump sprockets, and eat themselves. We re-tension or replace the chain and sprocket set.
- Post heave misaligning swing arms. Arlington’s expansive clay soil swells in wet winters and shrinks in summer drought. Posts lean, couplings chew up, and your Ghost Controls opener fights a gate that’s no longer square. We re-anchor posts with concrete pier reinforcement and re-time the entire system.
Ghost Controls Service in Arlington: What Local Conditions Mean for Your Equipment
Here’s the thing about Arlington that no generic repair page will tell you: your Ghost Controls opener is almost always bolted to an ornamental iron gate hung on black-clay soil, and that soil never stops moving. Wet winters push posts out of plumb. Summer droughts drop them back. Every cycle racks the gate frame, strips hinge welds, and misaligns the swing arm couplings on your Ghost Controls opener. You won’t see this failure pattern 20 miles east in Dallas’s sandier soil – that ground stays put. Here in Arlington, from the brick-and-iron neighborhoods around Parks at Arlington to the master-planned streets near Viridian, a Ghost Controls unit that’s “just stopped working” is usually the soil’s fault, not the opener’s. We start at the post, not the circuit board. Fix the panel without the post and you’ll fix it twice.
Ghost Controls Models & Products We Service in Arlington
We work on the full Ghost Controls line: the AXP1 heavy-duty automatic gate opener kit, the TDS2XP dual swing gate opener kit, the SYK single gate opener kit, and the DS1 slide gate opener. For 15-plus-year-old units with repeated logic board failures, we’ll tell you straight: replace the motor unit, reuse the existing gate and hardware. It’s cheaper than another week of downtime. We stock factory Ghost Controls parts locally for fast turnaround, plus the aftermarket upgrades – sealed limit switches, high-temp gear grease, hardened clevis pins – that actually hold up better in Arlington’s climate than what the factory shipped. If you want to know more about what we carry and what we recommend, see our full Ghost Controls sales & service page.
Ghost Controls Service Pricing in Arlington
Most Ghost Controls repairs in Arlington land between $150 and $600 depending on what’s actually wrong. A limit switch replacement runs $120 to $220. Control board capacitor work is $140 to $300. Gear replacement on an AXP1 or TDS2XP runs $200 to $450 in parts and labor. Post re-anchoring with concrete pier reinforcement starts around $400 because it’s real work – digging, concrete, re-setting, re-timing. Full opener replacements with installation run $800 to $2,200 depending on the model and gate size.
What drives the price? The age of the unit, whether the posts have moved, and whether we’re repairing failed parts or undoing years of neglect. Every estimate is free, the price is quoted and agreed before any work starts, and we don’t charge a trip fee inside the county. We also offer $40 off any repair over $200 and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for an exact quote – estimates are free.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Arlington
Most likely yes, but not the whole board. Arlington’s hard freezes crack and bulge the capacitors on Ghost Controls control boards, especially on AXP1 units that were never winterized. We test the board, replace the bulged caps and any corrosion-damaged traces, and you’re back running without paying for a full board replacement. Call (903) 829-4499 and we’ll come check it.
That’s thermal binding. At 105°F, the metal gate and the Ghost Controls swing arm expand and bind against each other, and the opener’s sensors read that resistance as an obstruction and reverse the gate. We re-shim the arm clearance and re-grease with high-temp compound so the gate runs clean even at the hottest part of the afternoon.
“Looks straight” is the operative phrase. Arlington’s black-clay soil shifts posts by fractions of an inch every season, and a quarter-inch of post movement at the base means a visibly misaligned sprocket at the chain run. The chain rides the sprocket at an angle, wears the teeth, and eventually strips. We check the post with a level, re-anchor if needed, and replace the sprocket and chain together so one doesn’t immediately destroy the other.
Once a year, minimum, and ideally in late spring before the summer heat hits. Arlington’s climate is hard on this equipment – dust, freeze cycles, triple-digit heat, and clay soil movement. An annual check catches limit switch wear, cap degradation, and post movement before they become breakdowns. If your opener hasn’t been serviced in two years or more, call (903) 829-4499 and we’ll get it squared away.
Yes. A cracked keypad housing lets moisture in, and Arlington’s freeze-thaw cycles will finish it off eventually – usually at the worst possible time, like the night of a hard freeze. We replace Ghost Controls keypads with new factory units and seal the connections against our weather. It’s a quick job and far cheaper than getting locked out at midnight.
Service Areas Near Arlington
We work throughout Arlington and the surrounding cities. You’ll find us in Grand Prairie, Irving, Duncanville, Kennedale, and Euless. If you’re in Grand Prairie, see our Ghost Controls service in Grand Prairie page. If you’re over in Irving, we’ve got a Ghost Controls service in Irving page for that too. And for a full look at the communities we cover, check our Arlington service area page.
Book Your Ghost Controls Service in Arlington Today
Tell me what it’s doing, and I’ll tell you what it needs. No runaround. Call (903) 829-4499 and a live person answers – day or night. We’ll get you on the schedule, show up when we say we will, and fix your Ghost Controls opener right where it sits. Same-day service is available for emergency repairs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.