Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Arlington
Gate motor and opener work in Arlington usually costs $275-$1,900, depending on whether we’re repairing an actuator or installing a full slide operator with battery backup. Most our Gate Repair in Arlington calls are done the same day, and we quote every job before we touch a bolt. Call (903) 829-4499 and a live person answers, any hour.
We know Arlington’s neighborhoods, not just its ZIP codes. The gate at your Dalworthington Gardens estate, the common-area slide gate at a Viridian HOA entrance, the worn swing opener on a Southwest Arlington brick-and-iron driveway. Same troubles, different streets. What matters is that somebody shows up who’s worked on this equipment before, in this soil, under this heat. That’s us. Our Gate Motor & Opener team is local, owner-operated, and Hal Gatewood’s name is on the shop.
Why Gatewood Fence & Gate Is Arlington’s Preferred Gate Motor & Opener Company
Hal Gatewood started this shop in 2001 and never turned it into a franchise. That matters in Arlington, where the gates were installed during the 1980s-2000s buildout and are now failing in waves. Homeowners and HOA boards in Arlington call us because we answer the phone, show up in the window we promise, and fix what’s actually broken instead of selling a full replacement.
We carry a written 90-Day Done Right Promise on every job. If the opener acts up again inside 90 days, one call brings us back. No runaround. No charge. We also offer a free second opinion on any written estimate from another company, which HOA property managers around Lake Arlington use more than you’d think.
A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a call center in another state. When your gate motor dies at 6 a.m. and the whole neighborhood is stuck, you’ll talk to somebody who can actually send help to Arlington, not take a message.
Our Gate Motor & Opener Services in Arlington
Motor Installation
Gate Installation in Arlington for a new gate motor runs $850-$1,900 for a standard residential swing or slide operator, including mounting, limit setup, and safety sensor calibration. If your HOA in the Viridian or Parks at Arlington area requires architectural approval for equipment changes, we’ll explain what the board needs to see before we start. Motor installation is measured and scheduled, not rushed. We give you a free on-site measure and a written price before any work begins.
Motor Repair
Most Arlington gate motor repairs land between $275 and $700. That covers things like failed capacitors, burned control boards, stripped gears inside the operator arm, and UV-cracked wiring from summers that push past 105°F. We repair first, replace when the repair genuinely won’t hold. The price is quoted and agreed before any work starts. A gate motor that hums but won’t move is usually repairable if you get to it before the arm burns out.
Linear Motor
Linear motors drive the slide-gate operators common at Arlington HOA entrances and larger estate driveways. We stock Linear parts in our DFW shop and provide Arlington Gate Parts & Welding across the city, from the gated communities east of Lake Arlington to the subdivisions near Martin High School. Linear slide operators are workhorses, but they need the track post dead plumb. On Arlington’s black-clay soil, that post moves every wet season, and the motor takes the beating.
Slide Motor
Slide gate motor work in Arlington runs $450-$1,200 for most repairs and $1,200-$2,500 when the full operator needs replacing. We handle chain-drive and rack-and-pinion slide systems. The biggest failure we see in Arlington: midday thermal binding, when a steel gate expands in 105°F heat and racks against posts that shifted after spring rains. We fix the post alignment, not just the motor, because swapping the operator without dealing with the post means you’ll call us again in June.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
We’re certified to service nine major opener brands, and in Arlington we see a lot of Linear, Viking, and DoorKing equipment on HOA common-area gates and older estate driveways, plus Mighty Mule service in Arlington when needed. We stock cold-weather repair kits for Viking and LiftMaster operators year-round, which is not something every company does. It dates back to Winter Storm Uri in February 2021, when hydraulic actuators and keypad entry panels across Arlington’s gated communities froze and cracked citywide overnight. We learned to carry those parts so the next hard freeze doesn’t leave a neighborhood locked out for three days.
Common Gate Motor & Opener Problems We See in Arlington Homes
- Post heave on black-clay soil. Arlington sits on expansive shrink-swell clay. Every wet season it swells and pushes gate posts out of plumb. Every dry summer it shrinks back. This cycle racks slide gates and strips hinge welds on swing gates until the operator fights the frame instead of moving it.
- Midday thermal binding. In July and August, surface temperatures pass 105°F and steel gates expand enough to bind against misaligned posts. The opener’s thermal overload trips and the gate stops halfway. Owners blame the motor, but the fix is usually post alignment.
- Wood-fence gate inserts loosening in drought. Arlington’s cedar-board privacy fences dry and shrink in the summer. The iron gate insert’s hinge hardware loosens against shrinking wood, the gate sags, and the opener’s arm bends trying to lift the sag. We repair the wood frame and re-weld the hinge points.
- Post-freeze electronics failure. Arlington rarely gets hard freezes, so nobody winterizes. When a freeze like Uri hits, hydraulic operator fluid thickens and cracks seals, keypads ice internally, and circuit boards pop. Whole HOA communities lose access the same night. We install cold-weather kits and battery backup so one freeze doesn’t shut the neighborhood down.
Pricing for Gate Motor & Opener in Arlington, TX
Here’s what Arlington homeowners and HOAs can expect to pay. Motor repair: $275-$700 depending on the part. New swing or slide operator installation: $850-$1,900 for residential, more for heavy commercial common-area gates. Battery backup add-on: $350-$700. Keypad entry replacement: $250-$600 per panel. Linear or Viking cold-weather retrofit: starts around $400.
We quote the full price before we start, in writing. No trip charge inside the county. $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for a free estimate. If another company wrote you an estimate, bring it. Second opinion’s free.
We Also Serve Cities Near Arlington
Our Gate Motor & Opener crew regularly works in Mansfield, Kennedale, Cedar Hill, and Grand Prairie. Same owner-operated shop, same 90-Day Done Right Promise, same live person on the phone. If your community is just outside Arlington, call us and we’ll tell you straight whether we can get to you the same day.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Arlington
Yes, in most Arlington HOA-governed communities, the HOA board or architectural committee must approve changes to common-area entry equipment before work begins. The City of Arlington itself doesn’t require a permit for opener replacement in most cases, but your HOA’s governing documents almost certainly do. We help boards and property managers prepare the equipment spec, mounting plan, and finish details they need for approval. We’ve done this for communities around Viridian, Parks at Arlington, and Lake Arlington. Call (903) 829-4499 and we’ll walk you through what your board will ask for, free.
Arlington sits on expansive black-clay soil that swells when wet and shrinks when dry. Spring rains push gate posts out of alignment. The operator then has to pull a gate that’s fighting its own hinges, which burns out motors, strips gears, and trips safety sensors. We reset post footings, re-weld hinge points on site, and recalibrate the operator limits. The price for post realignment runs $400-$1,000 depending on the gate. Call (903) 829-4499 for an exact number on your gate.
Yes. We wire new operators into existing DoorKing, Linear, and Viking intercom and keypad systems regularly across Arlington. We don’t rip out working entry systems just to sell you a package deal. The integration work runs $300-$900 depending on wiring condition and panel age. We’ll tell you upfront whether the existing intercom will survive another five years or whether you’re better off replacing it while we’re there.
Arlington automated gates must meet UL 325 entrapment protection standards, which Texas adopted through the state’s building codes. That means photo-eye sensors, reversing edges or inherent entrapment sensing, and audible alarms on slide gates in certain applications. If your Arlington gate opener predates those requirements, we’ll bring it into compliance during the repair or install, and we’ll show you exactly what we installed and why. A gate that closes on a car or a kid isn’t a repair we’ll let stand.
The fix is a cold-weather retrofit: hydraulic fluid rated for sub-freezing temperatures, heated keypad enclosures, battery backup so the gate works during a power outage, and a post-alignment check. We’ve installed these kits across Arlington since February 2021, including a Viking swing operator and two keypad panels at the Viridian Sailing Center entrance. The cost runs $400-$1,200 per entrance depending on the operator. Call (903) 829-4499 and we’ll give your HOA a written price for the retrofit before the next hard freeze.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.