Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair Near You in Grand Prairie, TX
If you are looking for gate repair near you in Grand Prairie, TX, we can usually get to your property the same day you call, and we fix the issue right in your driveway. We are a locally owned, owner-operated shop that has been serving Grand Prairie since 2001, and you can reach us directly at (903) 829-4499 any time of day or night. Whether you have a sagging hinge post or a gate motor that just stopped responding, I will make sure we get a qualified person out to your property to handle the repair properly the first time.
When you call for help with a gate, you want someone who actually knows how to weld and understands how mechanical systems fail, not someone who just shows up to swap out expensive parts. My name is Hal Gatewood, and my name is on the shop. I have been doing this long enough to know that a gate rarely just “breaks” on its own; it usually fails because of how it was installed or because of the way our North Texas soil shifts under the gate posts. We don’t just patch the problem; we fix the root cause so you aren’t calling us back next month.
Fast, Local Gate Repair
When your gate stops working, it is more than just an inconvenience. It is a security risk for your home and your property. We understand that urgency, which is why we keep our operation lean and local. We do not use dispatch centers or call queues that put you on hold for twenty minutes. When you call (903) 829-4499, a live person answers, and we get to work scheduling a time that actually respects your day.
We handle almost every type of gate issue on-site. Because we bring our welding equipment with us, we can often repair hinges, brackets, and structural steel right there at your curb. We do not need to haul your gate off to a shop, which saves you time and money. We service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate motor is acting up or your access control system is glitching, we have the parts and the experience to diagnose it quickly. We stand behind every single job with our 90-Day Done Right Promise. If it’s not done right, I make it right. No runaround, no fine print.
Areas We Cover
We are based locally and have been serving the community for over 29 years. While our primary focus is Gate Repair in Grand Prairie, we frequently travel to surrounding neighborhoods to help homeowners who are tired of national companies that don’t know the local terrain. We regularly work in Irving, Arlington, Duncanville, Kennedale, Euless, Bedford, and Hurst.
If you live in these areas, you know that our local clay soil can wreak havoc on fence posts and gate foundations. A gate that sags in the middle is usually telling you that the hinge post has shifted or the concrete footing has failed. We know these neighborhoods, we know how the soil behaves, and we know how to install or repair your gate so it lasts through the next season. Whether you are in a newer subdivision or an older part of town, we bring the same tools and the same commitment to doing the job right.
Common Gate Repair Costs and Questions
We believe in upfront pricing. You should never be surprised by an invoice when the work is finished. While every gate is different, we can give you a clear idea of what to expect before we even pick up a wrench.
How much does gate repair cost in Grand Prairie?
Most minor gate repairs in Grand Prairie, such as hinge adjustments, sensor cleaning, or basic hardware tightening, range from $150 to $300. More complex jobs involving on-site welding for structural steel or complete motor replacements can range from $400 to $950, depending on the parts required. We offer a permanent 10% discount for seniors and veterans, and we take $40 off any repair over $200. Call (903) 829-4499 for an exact quote – estimates are free.
Can you fix my gate today?
Yes, we offer same-day service for most gate repair calls in Grand Prairie and the surrounding areas. Because we are locally owned and owner-operated, we don’t have to wait for corporate approval to prioritize your emergency. If you call us in the morning, we will do everything in our power to have someone at your door by the afternoon.
Is it cheaper to repair or replace my gate motor?
It depends on the age and the brand of the unit. If you are running a high-quality brand like LiftMaster or Viking, it is almost always cheaper to repair the motor or replace a specific circuit board than to install a brand-new system. We will give you an honest assessment of whether a repair is worth your money or if it is just throwing good money after bad. We are happy to provide a free second opinion on any written estimate you have already received from another company.
Do you charge extra for after-hours calls?
No, we answer our phones 24/7 because we know gate issues don’t follow a 9-to-5 schedule. If your gate is stuck open or closed in the middle of the night, you can call us, and we will get someone out to help you. We do not charge hidden “emergency” fees just because it is late; we charge for the work we do, and we do it right.
How We Approach Your Gate Repair
When we arrive at your property, we don’t start by guessing. We start by watching the gate in motion. A gate is a mechanical system, and it will tell you exactly where it is failing if you know what to look for.
1. Safety Inspection: First, we ensure the gate is stable. If a gate is hanging off a hinge or a cable is frayed, we secure the area immediately. High-tension springs and heavy steel gates can be dangerous, so we never recommend DIY repair for structural or spring-related issues. Let a trained professional handle the heavy lifting.
2. Diagnostic Review: We watch the gate open and close. We check the hinge post, the gate panel, the motor assembly, and the safety sensors. If a gate drags, we check the foundation. If it stops halfway, we check the limit switches.
3. Upfront Quote: Before we do any work, we tell you exactly what is wrong and exactly how much it will cost. We don’t believe in “starting the job to see what we find.”
4. On-Site Repair: We perform the work right there. If a bracket is broken, we weld it. If a part is worn out, we replace it with a quality component.
5. The 90-Day Promise: Once we finish, we test the gate with you. We make sure it closes smoothly and the safety sensors trigger exactly as they should. Everything we do is backed by our 90-Day Done Right Promise in writing.
Why Choose a Local Specialist?
There is a difference between a company that treats you like a number and a company that treats you like a neighbor. When you hire a national chain, you are often paying for their marketing budget and their dispatch fees. When you hire Gatewood Fence & Gate, you are paying for the work itself.
I have been doing this since 2001. I have seen every kind of gate failure, from rusted-out hinges in humid summers to motor boards fried by North Texas lightning. I know that the person who shows up at your door is the most important part of the job. That is why we don’t send out subcontractors. We send out people who are background-checked, uniformed, and trained to my standards.
We don’t try to upsell you on a new gate when a simple weld will fix your existing one. We don’t try to sell you a new motor when your safety sensors just need to be aligned. We are here to keep your gate running, and we are here to build a reputation that lasts. You can look us up, you can find our address, and you can call us directly. If you need gate repair, call (903) 829-4499 today, and let’s get your gate working the way it should.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie and nearby areas.
What Our Customers Say
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo