Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mansfield
Gate installation in Mansfield, TX typically runs $2,400 to $7,800 for a standard automated driveway gate, with pedestrian gates landing between $900 and $2,300. A manual ornamental steel driveway gate on a welded frame usually falls in the $1,800 to $4,500 range. We quote the job before any work starts, and that’s the number on the invoice. Call (903) 829-4499 and a live person answers, day or night.
We’ve been welding, setting posts, and chasing conduit runs in Mansfield since before most of Heritage and South Pointe were even platted. The soil here changes everything about how a gate should be installed. More on that below, because if your installer treats Mansfield dirt like it’s just dirt, you’ll be calling somebody else in three years to fix a leaning post.
Why Gatewood Fence & Gate Is Mansfield’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, back when Mansfield was still shaking off its small-town skin and the first wave of master-planned communities was rolling in. His name is on the building, on every invoice, and on the 90-Day Done Right Promise we stamp in writing on every job. That promise means if something isn’t right, one call brings Hal back. No runaround, no fine print, no argument.
Mansfield homeowners call us because we answer the phone. Not a voicemail. Not a call center three states away. A live person at (903) 829-4499, around the clock. When you call about a gate that won’t close or a new installation you need scheduled, you talk to someone who knows the difference between a Viking operator and a BFT control board, not someone reading a script.
We show up when we say we will. Mansfield isn’t a far-flung drive for us, it’s home territory. We know the HOA architectural committees in South Pointe, Walnut Creek, and Heritage well enough to know what finish they’ll approve and what they’ll bounce. That saves you from installing a gate twice.
Our Gate Installation Services in Mansfield
Driveway Gate
A driveway gate in Mansfield does double duty: it keeps the kids and dogs in, and it tells every car rolling down the street that this house isn’t an open buffet. We build and install welded steel driveway gates sized to your opening, whether that’s a single 12-foot leaf across a standard driveway or a double gate spanning a wider entry off Matlock Road or Broad Street. Every new driveway gate gets posts set below frost line and footings sized for Blackland Prairie clay, not for whatever the last job in Fort Worth needed.
Pedestrian Gate
Pedestrian gates get abused harder than any other gate on the property. They’re opened and slammed a dozen times a day, they sag, and they bind. We install pedestrian gates with welded frames and heavy-duty hinges sized for the weight, not for the price tag. If your Mansfield home has an existing pedestrian gate that’s loose on its post or dragging across the walkway, we’ll weld the frame square and true it up before we ever talk replacement.
Sliding Gate
Sliding gates make sense on Mansfield lots where the driveway runs perpendicular to the street or where a swing gate would eat too much of the yard. We install cantilever and track-style slide gates, and we pay close attention to two things Mansfield throws at us: grade changes and drainage swales. A slide gate that fights a slope burns through rollers and motors. We set the steel track and rollers to handle the natural drainage path, not against it.
Swing Gate
Swing gates are the most common driveway gate in Mansfield’s HOA subdivisions, and they’re also the most sensitive to what’s under them. Blackland Prairie clay swells in wet winters and cracks open in dry summers, which means a swing gate installed on a shallow footing will bind against the latch post within a couple of seasons. We pour deeper footings, add gravel drainage at the base of each post, and on problem lots we’ll spec helical piers. That last option costs a bit more, but it ends the seasonal sag for good.
Double Gate and Security Gate
Double gates and heavier security gates on Mansfield homes need operators matched to the real leaf weight, not the spec sheet the builder’s electrician pulled out of a box. Builder-grade openers on double swing gates fail early here, especially when the afternoon sun beats on a black iron leaf and the control board sits inside a housing that’s 140°F by 4 p.m. We install operators with heat-rated circuit boards and set travel limits so both leaves seat against the center stop on the first try, every time. A security gate is also a statement: we build them heavy, weld them square, and powder-coat them to match the iron fence the HOA already approved.
These services are part of our broader Gate Installation work, and we’re the crew Mansfield calls when a gate needs to be welded on site rather than hauled off to a shop.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mansfield
We service and install gate operators from BFT, Linear, Viking, and Ghost Controls, among others. Our trucks carry common control boards, photo eyes, limit switches, and capacitor kits for these brands, so when we come out for a Mansfield repair we usually finish it in one trip. If your HOA requires a specific brand match or your existing keypad and remotes need to keep working after an operator swap, we’ll spec the replacement around what you already have, not around what’s easiest for us to order.
Common Gate Installation Problems We See in Mansfield Homes
- Builder-grade operators dying in the heat. Mansfield’s 100°F+ summer afternoons cook the circuit boards inside gate operators that were never heat-rated for Texas sun on a black iron gate. We routinely replace 5-to-7-year-old builder units in Heritage and South Pointe that failed because the board gave up, not because the motor wore out.
- Manual gates with no conduit run for automation. A lot of Mansfield homes were built with a manual driveway gate and no low-voltage or power run to the hinge post. Homeowners who later want automation face trenching through HOA-approved landscaping. We do that trenching carefully, lay conduit at proper depth, and leave the yard looking like we were never there.
- Post footings poured too shallow on Blackland Prairie clay. That clay swells when wet and shrinks when dry, and a footing that looked fine in July can heave half an inch by February. That half inch is the difference between a gate that latches and one that won’t. New installations in Mansfield need deeper, wider footings with a gravel drainage layer at the base.
- Winter Storm Uri damage still lurking in conduit runs. Uri froze solenoids and cracked PVC conduit on automated gate operators all across Mansfield’s newer subdivisions in February 2021. Homeowners who patched things up with heat tape still call us when winter weather is forecast, and before we install a new operator we inspect the existing conduit for cracks and moisture intrusion. A new operator wired into a cracked conduit is a future failure waiting on the next freeze.
Pricing for Gate Installation in Mansfield, TX
Here’s what Mansfield homeowners can expect to pay for gate installation work: a manual ornamental steel driveway gate on a welded frame runs $1,800 to $4,500 depending on width, height, and iron style. A single automated swing gate with a mid-range operator lands at $3,800 to $6,500, and a double swing gate with automation typically falls between $5,500 and $9,800. Pedestrian gates run $900 to $2,300, and adding automation to an existing manual gate starts around $2,200 and climbs based on trenching distance and operator choice.
What moves the price is the same list every honest gate company in Mansfield keeps: gate size and weight, whether we’re pouring new footings or using existing posts, how far we need to trench for power and low-voltage, and whether the HOA requires a specific finish or iron profile. We quote the job in writing before any work begins. The number on that quote is the number on the invoice. Nothing changes at the door. Call (903) 829-4499 for a free estimate, and if you already have a written estimate from another company, bring it to us for a free second opinion.
We Also Serve Cities Near Mansfield
We work all over Mansfield, and we regularly run jobs in Arlington, Kennedale, Cedar Hill, and Duncanville. If you’re in one of those nearby cities and dealing with a gate that sags, an operator that hums but won’t move, or a new installation you want done once and done right, the same crew and the same 90-Day Done Right Promise apply. Call (903) 829-4499 and talk to a live person.
Serving Mansfield, TX - Our Local Coverage Area
We’re based in the Mansfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Mansfield
Yes, it absolutely does. Mansfield sits on Blackland Prairie clay that swells when wet and shrinks when dry, and that movement pushes gate posts out of alignment. We pour deeper and wider footings than a generic installer would, add a gravel drainage layer under each post, and use helical piers on lots where the soil movement has already cost the homeowner one gate. The extra groundwork is the single biggest difference between a Mansfield gate that stays square for 20 years and one that binds after two. Call (903) 829-4499 to have us look at your specific lot before anyone digs.
Yes. We trench a new conduit path from the house or an existing electrical junction to the hinge post, run both power and low-voltage control wiring at proper depth, and install the operator of your choice. On Mansfield lots where the HOA has approved landscaping in the trench path, we cut sod cleanly, lay the conduit, and put everything back so the committee never has a reason to complain. The trenching usually adds a day to the job and a line item to the quote, and you’ll know that number before we start. Call (903) 829-4499 for a free measure and a written price.
We match the new gate and its finish to what the HOA already approved for the rest of the community. That means if your neighborhood is all matte black ornamental steel with a specific spear-top profile, we build to that profile and match the powder coat, rather than substituting whatever’s on the shelf. We’ve installed enough gates in Heritage, South Pointe, and Walnut Creek to know what those committees look for, and we’ll help you put together the submittal they need. Call (903) 829-4499 and we’ll talk through what your specific HOA requires.
Check the existing conduit, the operator housing, and the condition of any exposed low-voltage wiring. Uri froze solenoids and cracked PVC conduit all over Mansfield, and a new operator wired into a cracked, moisture-filled conduit will fail the next time the temperature drops hard. We include a conduit inspection on every new automated gate installation, and if we find cracks or water intrusion, we’ll replace that section before it becomes your problem on the next freeze.
Usually, yes. Steeper Mansfield lots and drainage swales don’t rule out a slide gate, but they do change how we set the track and the rollers. We build the steel track to follow the natural drainage path, set the rollers on adjustable brackets so the gate travels level, and if the slope is significant we’ll spec a cantilever slide gate that doesn’t roll on the ground at all. The key is measuring the grade before we quote, and that’s part of every free estimate. Call (903) 829-4499 and we’ll come look at your lot.
Key Takeaways for Gate Installation in Mansfield
- A standard automated driveway gate in Mansfield runs $3,800 to $9,800 depending on single or double configuration and operator choice. Manual ornamental steel gates run $1,800 to $4,500.
- Mansfield’s Blackland Prairie clay swells and shrinks seasonally. New gate posts need deeper footings, gravel drainage, and sometimes helical piers, or the gate will bind within a couple of seasons.
- We stock parts for BFT, Linear, Viking, and Ghost Controls operators, and we service nine major brands total.
- We quote every Mansfield job in writing before work starts. The price on the quote is the price on the invoice. No trip charge inside the county.
- Every job carries the 90-Day Done Right Promise in writing. Call (903) 829-4499 any time, day or night, and a live person answers.
If you’re in Mansfield and you’re tired of gates that sag, operators that hum without moving, or companies that quote one thing over the phone and charge another at the door, call us. Hal Gatewood’s name is on the shop, the shop is down the road, and the phone is answered by a real person around the clock. Call (903) 829-4499 for a free estimate, and if another company has already given you a written quote, bring it to us for a free second opinion.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mansfield since 2001.