Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Arlington?
Most Gate Repair jobs in Arlington, TX, typically range between $150 and $450, depending on whether you need a simple hinge adjustment or a more complex component replacement like a gate motor or circuit board. For basic welding or minor alignment issues, homeowners often find themselves on the lower end of that spectrum, while motor-related electrical work usually sits on the higher side. Since we do not charge a trip fee for Arlington residents, the price you are quoted is the price you pay to get your gate moving again.
Gate Repair Cost Breakdown (2026)
We believe in upfront pricing because nobody likes a surprise when they open their wallet. In our experience fixing gates across Arlington neighborhoods-from the older charm of Park Row to the newer layouts in Viridian-the specific problem usually dictates the cost. Here is what you can expect to pay for common repairs in our local market.
| Repair Type | Estimated Cost Range |
|---|---|
| Hinge Adjustment & Re-alignment | $150 - $250 |
| On-Site Welding (Per Joint/Section) | $175 - $300 |
| Gate Opener Sensor Replacement | $200 - $350 |
| Circuit Board or Control Box Repair | $250 - $450 |
| Gate Motor Replacement (Labor + Parts) | $550 - $1,200+ |
A gate sags in the Hinge & Post Repair area, not in the middle. That is where we start every assessment. When you fix the panel without addressing the post, you are just fixing it twice. We prefer to do the job right the first time, which is why we offer our 90-Day Done Right Promise on every single repair. If you are dealing with a gate that won’t close or a motor that just hums, call (903) 829-4499. We can usually give you a solid idea of the cost over the phone before we even pull into your driveway.
What Affects Gate Repair Pricing in Arlington?
When I look at a gate in Arlington, I am not just looking at the motor or the metal. I am looking at how our North Texas soil and weather have treated your specific setup. Here is what actually moves the needle on your repair bill.
- Soil Movement: Arlington has a lot of expansive clay soil. When the ground shifts after a dry summer or a heavy spring rain, your posts move. If your gate is dragging, we have to reset the post or adjust the hinges to compensate for the ground, which takes more time than just replacing a part.
- Gate Material: Fixing a wrought iron gate requires on-site welding, which is a specialized skill that differs from troubleshooting a simple aluminum or wood gate. We bring our welding rig right to your driveway so we can fix the metal where it stands.
- Brand Specifics: We service nine major brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your system is an older model where parts are no longer manufactured, we may need to source compatible components or perform a custom modification, which adds to the labor time.
- Electrical Complexity: If your gate has a short in the wiring or a fried circuit board, we have to trace the electrical path. This requires diagnostic time that you do not see with a mechanical hinge repair.
- Safety Compliance: If your gate is missing modern safety sensors, we have to bring it up to current safety standards. It isn’t just about the repair; it is about ensuring that gate doesn’t close on a vehicle or a person.
If you are worried about the cost, remember that we provide a free second opinion on any written estimate you have already received. If someone told you that you need to replace your entire system, give us a call. I’ll come out, take a look, and tell you straight if it can be repaired for less.
How to Save on Gate Repair
You do not need to spend a fortune to keep your gate running. We have been owner-operated since 2001, and I have seen plenty of people pay for “emergency” services they didn’t actually need. Here is how to keep your costs down without cutting corners.
- Don’t Force It: If your gate is stuck, do not push it manually if the motor is engaged. You might strip the gears, turning a $200 repair into a $600 motor replacement.
- Use Our Standing Offers: We don’t play games with pricing. We offer $40 off any repair over $200. We also provide a permanent 10% discount for seniors and veterans.
- Get a Second Opinion: Before you sign a contract for a full replacement, call us. We specialize in repair-first, not replace-first. If I can weld it or fix the board, I will tell you.
- Keep the Tracks Clear: Debris, leaves, and trash in the gate track cause motors to work twice as hard. Keep the path clear, and your motor will last years longer.
- Call Early: A gate that sounds like it is grinding is usually just needing a little grease or a minor adjustment. If you call us when you first hear the noise, you can avoid a total system failure later.
We don’t charge a trip fee inside the county, so you are already saving money by choosing a local shop. If you want to talk to a human who actually knows how these systems are built, call (903) 829-4499.
FAQs - Gate Repair Cost
Is it cheaper to repair or replace my gate motor?
In most cases, repairing a motor is significantly cheaper than replacing it, often saving you hundreds of dollars. If your motor is over 15 years old or the circuit board is completely fried, we will be honest with you about whether a replacement makes more financial sense. Call (903) 829-4499 for a free estimate so we can look at your specific unit.
Do you charge a trip fee for gate repair in Arlington?
No, we do not charge a trip fee for service calls within the county. We are locally owned and owner-operated, and we believe in transparent, upfront pricing, which means you won’t be hit with hidden travel charges on your final invoice.
Can you fix my gate today?
We pride ourselves on answering the phone with a live person 24/7, and we prioritize getting your gate secure as quickly as possible. While our schedule fills up, we strive for same-day or next-day service for urgent gate issues, especially if your gate is stuck open and compromising your security.
What if the gate still doesn’t work after the repair?
Every single job we perform is backed by our 90-Day Done Right Promise. If the repair doesn’t hold or the issue persists, we will come back and make it right, just as we promised in writing. We stand behind our work because my name is on the shop and I’m not going anywhere.
Do you offer discounts for veterans or seniors?
Yes, we offer a permanent 10% discount for all seniors and veterans as a thank you for your service and loyalty. Please let us know when you call (903) 829-4499 so we can apply that to your estimate right from the start.
Pricing reflects the Arlington market as of 2026. Gatewood Fence & Gate offers free estimates - call (903) 829-4499.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.
What Our Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly