Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Irving, TX | Gatewood Fence & Gate
We repair Ghost Controls gate openers across Irving, TX as an independent service provider. The short answer: yes, we work on Ghost Controls equipment every week, and what makes our Ghost Controls work different here is that we understand how Irving’s Blackland Prairie clay and HOA-heavy gate stock beat these openers up. Call (903) 829-4499 and a live person answers, not a voicemail. We’re locally owned and owner-operated, we’ve been at it since 2001, and every job comes with our 90-Day Done Right Promise in writing.
Why Irving Residents Choose Us for Ghost Controls Service
Ghost Controls builds solid residential and light-commercial opener systems, but they have specific quirks. We know them. Hal Gatewood has been fixing gates since 2001, and we’ve worked on Ghost Controls ABBT2 swing arms, HDP1 heavy-duty pistons, DP2 solar retrofits, and AXS1 vehicle sensors across Irving’s older North Irving neighborhoods and the Valley Ranch master-planned communities. We’re not manufacturer-affiliated or authorized, and that’s deliberate. It means we answer to you and to the gate in your driveway, not to a factory rep’s service bulletin. We stock genuine Ghost Controls OEM control boards and actuators when they’re available, and we also know when an aftermarket limit switch or sensor simply survives Irving’s weather better than the original.
Hal picked up the welding and mechanical side of the trade at Tarrant County College’s vocational program before going out on his own, and most folks around the Dalworth Park neighborhood know his truck on sight. The name is on the shop, and the shop is down the road. That is the oldest accountability there is. We offer free second opinions on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. We weld on site in your driveway, so your gate stays put while we fix it.
Common Ghost Controls Gate Repair Problems We Solve in Irving
- Limit switch drift on ABBT2 and HDP1 units. Irving’s storm season brings power surges and lightning strikes that scramble limit settings. The gate forgets where open and closed are, and it either overtravels and jams or stops halfway. We recalibrate and replace fried limit switches with parts that hold their setting.
- Corroded or seized control board terminals. North Texas summers are humid, and Irving sits on clay that throws fine dust into everything. Control board terminals corrode, connections go intermittent, and the opener stops responding or behaves erratically. We clean, re-terminate, and seal boards so they stay working through the next wet-dry cycle.
- Stripped linear actuator gears on high-cycle gates. Las Colinas corporate campuses run Ghost Controls gear on vehicular gates that cycle hundreds of times a day. That’s beyond residential duty rating. We see stripped gears and burned motors, and we replace them with heavy-duty aftermarket parts that hold up to the cycle count.
- Photoelectric sensor misalignment from gate post heave. Blackland Prairie clay swells and contracts violently with wet-dry cycles. It pushes gate posts out of plumb, which throws sensor beams out of alignment, and the opener constantly reverses or refuses to close. We realign posts, true the hinges, and reset the sensor path properly.
- Solar charging failure on DP2 retrofit systems. Valley Ranch homes with solar-powered Ghost Controls openers lose charge in Texas heat when panels get coated with clay dust or batteries cook in direct sun. We test the panel output, replace dead batteries, and reposition panels where they’ll actually stay clean and charged.
Ghost Controls Service in Irving: What Local Conditions Mean for Your Equipment
Here’s the thing that doesn’t show up in generic repair advice: Irving’s Las Colinas district hosts one of the highest concentrations of Fortune 500 corporate campuses and HOA-managed gated communities in North Texas. Along State Highway 114 and through Valley Ranch, you’ll find bollard-mounted Ghost Controls operators, decorative brick column retrofits, and commercial slide gates running far above residential cycle counts. That means Ghost Controls repair in Irving isn’t just about swapping a gearbox. It’s about coordinating with corporate facility managers who need documentation, and HOA architectural committees who care deeply about whether a retrofitted operator fits inside the original 1980s column aesthetic. A technician in neighboring Garland or Grand Prairie Ghost Controls service rarely faces that. We do it every week. Show me the gate closing on its own and I’ll show you where it’s failing. We speak both the mechanical language and the HOA paperwork language, and we keep the repair invisible while making the operator work right.
Ghost Controls Models & Products We Service in Irving
We service the full residential Ghost Controls lineup you’re likely to find in Irving: the ABBT2 automatic gate opener, the HDP1 heavy-duty piston, the DP2 solar retrofit kit, and the AXS1 vehicle sensor. Our parts approach is simple. We install genuine Ghost Controls OEM control boards and actuators when they’re available because compatibility matters. But we don’t hesitate to use quality aftermarket limit switches, sensors, or batteries when they outperform the originals in Irving’s heat, humidity, and clay dust. We recommend replacement only when the operator is over a decade old, the gearbox is stripped, and the parts bill exceeds 60% of a new unit’s cost. We stock common Ghost Controls parts locally so we’re not waiting on a ground shipment while your gate stays open to the street. You can read more about our Ghost Controls sales & service experience, or call (903) 829-4499 to talk through what your gate is doing.
Ghost Controls Service Pricing in Irving
You’ll always know the price before we touch a tool. Ghost Controls repair in Irving typically runs between $180 and $340 for common jobs like limit switch replacement, sensor realignment, or control board repair. A stripped actuator gear on a high-cycle commercial gate runs higher because the part and the realignment work are heavier. What drives cost: whether we’re replacing an OEM board or an aftermarket switch, how far the posts have heaved out of plumb, and whether an HOA requires specific mounting hardware inside decorative columns. Every estimate is free, quoted upfront, and agreed before work starts. We won’t quote one number on the phone and hand you a different invoice at the door. That’s not how we work. Call (903) 829-4499 for an exact quote. And if you already have a written estimate from another company, bring it in. We’ll give you a free second opinion.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well, and we also offer Gate Repair - Irving. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Irving
Yes, and we do it regularly. We’re an independent Ghost Controls service provider in Irving, not factory-affiliated. That means we work on your equipment honestly, recommend replacement only when it actually makes sense, and use OEM parts when they’re the right call and proven aftermarket parts when they survive Irving’s weather better. Every job carries our 90-Day Done Right Promise in writing.
That’s almost always a photoelectric sensor misalignment from gate post heave. Valley Ranch sits on expansive Blackland Prairie clay that swells and contracts with every wet-dry cycle, pushing gate posts out of plumb. When the post leans, the sensor beam drifts, and the opener reads an obstruction. We realign the post, true the hinges, and reset the sensor path. Call (903) 829-4499 and we’ll diagnose it on site.
Every 12 months is right for most residential Ghost Controls systems in Irving. If your gate is in Valley Ranch or any area with noticeable clay soil movement, twice a year catches post heave before it eats your actuator gears. A gate sags in the hinge post, not in the middle, and annual checks catch the lean early. The estimate is free.
We do. Las Colinas and Valley Ranch HOA entry systems, corporate campus gates along State Highway 114, and bollard-mounted Ghost Controls operators on commercial drives are all within our regular service area. We coordinate with HOA architectural committees on decorative brick column retrofits, offer our Gate Installation in Irving, and provide the documentation facility managers need for vendor files. Tell me what it’s doing, and I’ll tell you what it needs. No runaround.
More often than not in Irving, it’s the battery. Texas heat cooks sealed lead-acid batteries inside the control box, and coated panels just reduce charging speed rather than stopping it entirely. But we test both before we sell you anything. We check panel output under load, test the battery’s actual capacity, and replace only what’s dead. Call (903) 829-4499 and we’ll sort it out.
Service Areas Near Irving
We cover Irving and the surrounding cities with the same owner-operated crew. Our Irving service area includes Valley Ranch, Las Colinas, and North Irving neighborhoods. We also run calls in Ghost Controls service in Arlington, Grand Prairie, Euless, and Duncanville. If you’re on the county line and not sure, call. We’ll tell you straight.
Book Your Ghost Controls Service in Irving Today
Your Ghost Controls opener was not cheap, and leaving it half-working leaves your driveway half-open to the street. We’ll come out, tell you what’s wrong, and quote a price before any work starts. Call (903) 829-4499. Hal Gatewood’s name is on the shop and on every invoice, and he has been fixing gates in this area since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Irving and surrounding communities since 2001.