Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterElectric Gate Repair in Grand Prairie, TX
Our Gate Repair Cost? (2026 Price Guide) - Grand Prairie, TX shows electric gate repair typically runs between $150 and $450 depending on the complexity of the electrical fault, with most common sensor or board issues resolved on the same day. When your gate stops responding to the remote or gets stuck halfway across the driveway, you need someone who knows the circuit boards and the mechanical strain points, not just a technician who wants to sell you a brand-new motor. I am Hal Gatewood, and at Gatewood Fence & Gate, we handle these repairs by focusing on the root cause-whether it’s a faulty limit switch in a Viking operator or a blown fuse in a Linear board-rather than just swapping parts until the bill gets high. If you need help, call (903) 829-4499 for a free estimate.
I have been doing this work since 2001, and I’ve seen enough gates in Grand Prairie to know that our local weather does more damage than anything else. From the intense summer heat that cooks delicate control boards to the occasional heavy rain that finds its way into unsealed gate boxes, these machines take a beating. When you call us, you aren’t getting a call center or a random crew sent from three cities away. You are getting the person whose name is on the shop. We handle full Gate Repair in Grand Prairie for both residential and commercial properties, but our electric gate service is where we really get into the weeds of the mechanical and electrical systems.
When You Need Electric Gate Repair
Most people wait until the gate won’t open at all before they call our Gate Repair services, but your gate will usually give you warning signs before it quits completely. If you notice these symptoms in your Grand Prairie driveway, it is time to have it looked at before you are locked in or out of your property.
- The gate hesitates or moves in jerks: This is often a sign of a failing capacitor or low voltage reaching the motor. In our experience, ignoring this leads to the motor burning out, which is a much more expensive repair than replacing a simple starter capacitor.
- The gate reverses before it hits the closed position: This is a classic safety sensor issue. If the alignment is off by even an inch, the gate thinks there is an obstruction. We see this often after heavy wind storms in North Texas when the sensor brackets get bumped or lose their level.
- No response to the remote control or keypad: If your gate is completely dead, it could be a blown fuse, a tripped breaker, or a failed control board. We check the power supply first, as many times it is just a loose wire connection that needs cleaning and tightening.
- The gate makes grinding or squealing noises: Electric gates should operate quietly. If you hear metal-on-metal grinding, the gears inside your motor assembly may be stripped or lacking lubrication. We can often save the assembly if we catch it early enough with proper gear maintenance.
- The gate stays open all the time: If your gate refuses to close, it is usually a safety loop or an exit loop issue. If the ground loop sensor buried in your driveway is damaged or has lost its signal, the gate “sees” a phantom car and won’t close.
A gate that won’t close isn’t just an inconvenience; it is a security risk. If you are dealing with any of these issues, call (903) 829-4499. We offer a 90-Day Done Right Promise on every repair, so you don’t have to worry about the same problem coming back next week.
Our Electric Gate Repair Process
I don’t believe in “dispatching” a technician to guess at your problem. When we arrive at your home, we follow a specific process to ensure we fix the actual failure, not just the symptom.
- Full System Diagnostics: We start by testing the voltage at the main power source and then check the output on your control board. Whether you have a BFT or a Ghost Controls unit, every brand has specific diagnostic codes we look for.
- Physical Inspection of the Gate Travel: An electric motor is only as good as the gate it moves. We check the hinges and the rollers. If your gate is sagging or dragging on the ground, the motor is working twice as hard as it should, which will eventually kill the gearbox.
- Safety Sensor Alignment: We verify that your photo-eyes are clean, aligned, and communicating properly. These are the most common points of failure, and we make sure they are mounted securely so they don’t shift with the next storm.
- On-Site Component Repair: Because I carry a stock of common parts and welding equipment on the truck, we can often perform on-site welding or board repair without needing to order parts or haul your gate back to the shop.
- Operational Verification: Before we leave, we cycle the gate multiple times while you watch. We make sure the force settings are adjusted correctly for your specific gate weight, so it stops when it should and doesn’t slam shut.
We are locally owned and owner-operated, and we have been at this for over 29 years. I keep my address published because I am not going anywhere. If you need home service you can trust, you can drive to my shop and look me in the eye.
Electric Gate Repair Pricing in Grand Prairie
I believe in upfront pricing. You will never see a “trip charge” on your invoice if you are inside the county, and I am happy to provide a free second opinion if you have another estimate that just doesn’t feel right. We offer a permanent 10% discount for seniors and veterans, and we take $40 off any repair over $200.
| Service Item | Typical Price Range |
|---|---|
| General Troubleshooting & Diagnostic | $95 – $150 |
| Safety Sensor Alignment/Replacement | $150 – $250 |
| Control Board or Capacitor Repair | $200 – $450 |
| Gearbox & Motor Maintenance | $250 – $500 |
| On-Site Welding Repair (Per Hour) | $150 – $250 |
These ranges cover the labor and the typical parts we keep on hand. If your gate requires a specialized part that isn’t commonly stocked, I will tell you exactly what it costs before we order it. No surprises, no hidden fees. For a detailed breakdown of what to expect, see our guide on how much gate repair costs in Arlington, TX. Call (903) 829-4499 for an exact quote on your specific gate system.
FAQs - Electric Gate Repair
Is it cheaper to repair my electric gate or replace the whole system?
Most of the time, it is significantly cheaper to repair your electric gate, especially if the frame and hinges are in good shape. We see many companies that push for a full replacement because it is easier for them than troubleshooting a circuit board, but we specialize in fixing what others want to replace.
Can you repair my gate if it is a brand you don’t install?
Yes, we are certified to service nine major brands, including LiftMaster, Viking, and Linear, so we have the experience to handle almost any unit currently installed in Grand Prairie. If you have an older or obscure model, give me a call, and I can usually tell you over the phone if it is something we can source parts for.
Do I need to be home for the repair?
You do not need to be home for the repair as long as we have access to the gate and the electrical disconnect, though I always prefer to walk you through what I found once the work is done. If you can’t be there, we can coordinate the payment and the walkthrough over the phone to make sure you are satisfied with the result.
What makes your repair service different from the big national companies?
The difference is accountability; when you call us, you are getting a live person who actually knows the business, and if something goes wrong, I am the one who comes back to fix it. We don’t use dispatchers or call centers, and we stand behind our work with a 90-Day Done Right Promise that is written on every invoice.
When your gate is giving you trouble, don’t wait for it to fail completely. Whether you need Gate Realignment or a motor repair, I have the parts and the experience to get it moving again. Call (903) 829-4499 for a free estimate and let’s get your gate back in working order.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie.