Gate Repair Cost - Honest Price Ranges, Free Written Quote

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

Wrought iron

Farm & ranch

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Gate Repair Cost in Grand Prairie?

Basic gate repairs in Grand Prairie typically range from $150 to $450, while more complex issues involving motor replacement or structural welding usually fall between $500 and $1,200. Most homeowners in our area find that a standard hinge adjustment, sensor realignment, or minor electrical troubleshooting lands on the lower end of that spectrum, provided the gate hasn’t been neglected for years.

When you call us at (903) 829-4499, I don’t guess at the price. I come out, look at the gate, and give you a firm number before a single tool comes off the truck. We’ve been running Gatewood Fence & Gate since 2001, and we know that nobody likes a surprise bill when the job is done.

Gate Repair Cost Breakdown (2026)

Costs vary depending on whether we are dealing with a simple mechanical fix or a deeper structural failure. Below is a realistic breakdown of what you can expect to pay for Gate Repair in Grand Prairie based on current labor and parts rates in our market.

If you see a price online that looks too good to be true, it usually is. We’ve seen plenty of “bargain” repairs that end up costing double because the previous person used the wrong parts or didn’t address the root cause, like a sagging post that was never plumbed correctly. We fix the gate right the first time, and we back it with our 90-Day Done Right Promise.

What Affects Gate Repair Pricing in Grand Prairie

Not every gate is the same, and neither is every breakdown. Here are the specific factors that dictate the final cost of your repair here in Grand Prairie - see our full 2026 gate repair cost guide for Arlington-area pricing.

• The Type of Gate Material: Wrought iron gates often require on-site welding to fix structural breaks, which is a specialized trade. Chain link or wood gates might be cheaper to repair, but they often require replacing entire sections if the rot or rust has gone too deep.
• The Severity of Sagging: A gate that drags on the driveway is usually a sign of a failing hinge post. If we just weld the hinge, the gate will sag again in six months. Fixing the post properly is a bigger job, but it’s the only way to ensure you aren’t paying for the same repair next year.
• Brand-Specific Parts: We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate opener uses proprietary parts that are no longer in production, we may need to source compatible modern components, which affects the price.
• Electrical Access: If your gate has stopped opening because of a short in the wiring buried under your driveway, finding that break takes time. We don’t just guess; we trace the line, find the fault, and repair it so you don’t have to tear up your landscaping.
• Accessibility: If your gate is stuck in the closed position and we have to manually override it or cut through a lock to get inside, that adds time to the initial diagnosis. We always try to get the gate moving as quickly as possible so you aren’t trapped or locked out.

How to Save on Gate Repair

You don’t need to overpay to get a professional repair, but you do need to be smart about who you hire. Here is how you can keep your costs down without sacrificing quality.

Take Advantage of Standing Offers: We believe in honest pricing. If your repair is over $200, we automatically take $40 off the final bill. We also offer a permanent 10% discount for seniors and veterans. If you already have a written estimate from another company, show it to us. We will provide a free second opinion, and if we can do it for less or better, we’ll tell you.

Don’t Wait Until the Gate Won’t Move: The most expensive repair is usually the one that happens at 2:00 AM on a Sunday because you ignored a grinding noise or a slow-moving gate for months. If you hear metal on metal or notice your gate moving slower than usual, call us at (903) 829-4499 before the motor burns out.

Check Your Power Source: Sometimes, the gate isn’t broken; it’s just not getting power. Check your breaker box in the garage. If the breaker is tripped, reset it once. If it trips again immediately, don’t keep flipping it-that’s a sign of a short, and that’s when you need to call a professional.

FAQs - Gate Repair Cost

How much does it cost to fix a sagging gate?

Fixing a sagging gate typically costs between $200 and $500, depending on whether we can perform a simple hinge & post repair or if we need to weld a new support structure to the post. A gate that sags in the middle usually points to a hinge post that has shifted, and we have to address the post to stop the issue from coming back. Call us at (903) 829-4499 for an exact quote.

Is it cheaper to repair or replace my gate opener?

If your opener is less than 10 years old and the problem is a sensor or a loose wire, repair is almost always cheaper, usually costing under $400. However, if the motor has burned out on an older unit, replacing the opener-which costs between $900 and $1,800-is often the better long-term investment because parts for obsolete models are hard to find and unreliable.

Do you charge a trip fee?

We do not charge a trip fee for any service calls inside the county. We are a local business, and we think it’s wrong to charge you just for showing up to look at the work.

Can you fix my gate today?

We understand that a broken gate is a security risk, not just an inconvenience. We prioritize calls where the gate is stuck open or where your vehicle is trapped. While we can’t always guarantee a same-day slot during our busiest weeks, we always do our best to get to you quickly. Call (903) 829-4499 to see what our schedule looks like right now.

What if I don’t know the brand of my gate opener?

That is perfectly fine. Many of our customers don’t know the make or model until we open the cover. We have decades of experience with all major brands like LiftMaster, FAAC, BFT, and Viking, so we can identify the unit as soon as we arrive. Just give us a call, and we will handle the rest.

The Value of Local Experience

I started Gatewood Fence & Gate in 2001 because I was tired of seeing homeowners get taken advantage of by companies that didn’t care about the final result. When you hire us, you aren’t getting a dispatch center or a subcontractor who has never seen your driveway before. You are getting me or my crew, and we know Grand Prairie. We know the soil conditions that cause posts to shift and the Texas heat that wears down gate sensors faster than they should.

We believe in the repair-first philosophy. If I can weld a bracket back onto your gate to make it last another ten years, I’m going to do that rather than try to sell you an expensive new gate you don’t need. My name is on the shop, and the shop is down the road. That is the oldest accountability there is. If something isn’t right, you call me, and I fix it. That is the 90-Day Done Right Promise, and it’s stamped in writing on every invoice we hand out.

When you need someone who will actually show up, stand behind their work, and answer the phone when you call, reach out to us. We are ready to help you get your gate moving again with Gate Repair Near Me in Grand Prairie, TX.

Pricing reflects the Grand Prairie market as of 2026. Gatewood Fence & Gate offers free estimates - call (903) 829-4499. Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie since 2001.