Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterDriveway Gate in Grand Prairie, TX
A functional driveway gate in Grand Prairie is more than just a convenience – it is your first line of defense for your property. When your gate fails to open, drags on the gravel, or leaves your driveway exposed, you need a fix that lasts rather than a temporary patch. At Gatewood Fence & Gate, we handle driveway gate repair and Gate Installation services with a philosophy rooted in common sense: we fix what is broken, we weld on-site, and we do not leave until the job is done right. If your gate is sagging, grinding, or refusing to respond to your remote, give us a call at (903) 829-4499. We have been serving this community since 2001, providing reliable service that keeps your property secure.
When you call, you get a live person on the other end of the line, not an automated system or a call center. I have been in this business long enough to know that a gate issue usually isn’t just about the motor; it is often about the hinge, the post, or the alignment that has shifted over time. Whether you need a simple hinge adjustment or a complex Gate Installation in Grand Prairie, we approach every job with the same commitment to durability. We are here to help you get your gate moving smoothly again.
When You Need Driveway Gate Service
Grand Prairie weather takes a toll on metal and moving parts. Between the intense summer heat that expands steel and the heavy clay soils that shift during our rainy seasons, gates here undergo significant stress. You generally know it is time to call for help when you notice these specific signs:
- The Gate Drags on the Driveway: If you see a fresh trench carved into your driveway or gravel, your hinge posts have likely settled or twisted. A gate does not sag in the middle; it sags at the hinge post, and that is where we start our assessment.
- Grinding or Screeching Noises: Metal-on-metal noise is a clear indicator that your bearings are shot or your rollers are misaligned. Ignoring this usually leads to the motor burning out, which is a much more expensive problem to fix.
- Intermittent Operation: If your gate opens sometimes but stalls other times, you might have a failing sensor or a loose wire connection. We often see this with Viking and Linear systems when the wiring has been exposed to the elements for too long.
- The Gate Won’t Latch or Close Fully: A gate that stays slightly ajar is a security risk. This is often caused by the gate frame shifting, preventing the latch receiver from lining up. We can adjust or weld the receiver on-site to get that snap-shut reliability back.
- Remote Control Issues: If you have to drive right up to the gate to get it to open, your antenna or receiver board might be failing. We service brands like Ghost Controls and BFT, ensuring your access controls are working from a reasonable distance.
Our Driveway Gate Process
I do not believe in hauling your gate off to a shop if I can fix it right in your driveway. My process is built around efficiency and accountability. When you hire Gatewood Fence & Gate, this is what you can expect:
- On-Site Assessment: I come to your property to look at the gate in its natural environment. We check the post stability, the hinge integrity, and the motor function. We never guess; we look at the physical evidence.
- Straightforward Diagnosis: I will tell you exactly what is wrong. If a simple weld or a hinge adjustment will fix it, that is what we do. We do not upsell parts you do not need.
- Upfront Pricing: Before we turn a single wrench, you will know the price. We offer $40 off any repair over $200 and a permanent 10% discount for veterans and seniors. There are no hidden fees or “surprise” charges at the door.
- The Repair Work: We perform the necessary welding, part replacement, or alignment right there on your property. We carry parts for major brands like BFT, Linear, Viking, and Ghost Controls, so we are ready to work immediately.
- Verification and the 90-Day Promise: Once the work is done, we test the gate under load to ensure it cycles perfectly. Every job is backed by our 90-Day Done Right Promise. If it isn’t right, we come back and make it right.
Driveway Gate Pricing in Grand Prairie
How Much Does Gate Installation Cost? (2026 Price Guide) - Grand Prairie, TX depends on the specific mechanical failure. A simple hinge adjustment or sensor cleaning is very different from replacing a primary gate operator or performing structural welding on a bent frame. We believe in transparency, which is why we provide free estimates on all repairs.
| Service Type | Estimated Range |
|---|---|
| Hinge & Alignment Adjustment | $150 - $300 |
| Gate Motor/Operator Repair | $250 - $600 |
| On-Site Welding Repair | $200 - $450 |
| Access Control/Sensor Replacement | $180 - $400 |
Please note that we do not charge a trip fee if you are inside the county. If you have received a written estimate from another company, I am happy to provide a free second opinion. We want you to feel confident in the work being done, not pressured by a high-pressure sales pitch.
FAQs - Driveway Gate
How much does it cost to repair a driveway gate in Grand Prairie?
Most minor repairs, such as hinge adjustments or sensor realignments, typically range from $150 to $300, while more complex motor or welding repairs on a Pedestrian Gate generally fall between $250 and $600. Because every gate setup is unique, we provide an upfront estimate before we start any work, and we offer a $40 discount on any repair over $200. Call (903) 829-4499 to discuss your specific gate issues.
Can you fix my gate today?
We prioritize urgent gate issues because we know that a stuck gate is a security risk and an inconvenience. While we cannot guarantee a specific arrival time without looking at our current schedule, we answer our phones 24/7 and make every effort to get to your property as quickly as possible. Reach out to us at (903) 829-4499 so we can get you on the schedule.
Is it better to repair my old gate or install a new one?
In many cases, a gate can be repaired for a fraction of the cost of a full replacement, especially if the structural frame is still sound. I always recommend a repair-first approach unless the gate is structurally compromised beyond safe usage. If you are unsure, I can come out to inspect your system and give you an honest recommendation on whether a repair will hold up or if it is time to look at our home page services for a replacement.
Do you work on all gate brands?
We are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we have been in business since 2001, we have experience with both older legacy systems and the newer, modern operators being installed today. If you have a specific brand, let us know when you call (903) 829-4499.
A Note on Safety: Driveway gates are heavy pieces of machinery that move with significant force. High-tension springs, heavy steel panels, and electrical components can be dangerous if handled improperly. Please keep children and pets away from the gate while it is being serviced. If you notice a cable fraying or a gate that seems ready to fall, do not attempt to hold it or force it open yourself; call a trained professional to handle the repair safely.
If you are tired of dealing with gate companies that do not return calls or leave you waiting, give us a try. We are locally owned, we are here in Grand Prairie, and we stand by our work with a written guarantee. Call (903) 829-4499 for a free estimate or to ask a question about your gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie since 2001.