Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Grand Prairie
A new driveway or security gate in Grand Prairie typically runs $3,200-$8,900 installed, depending on the gate style, operator, and whether we’re working with a single swing leaf or a heavier sliding panel. Most residential installs finish in one to two days on site. Call (903) 829-4499 and we’ll talk through what makes sense for your property, then schedule a free onsite measure and written quote.
We’re in Grand Prairie regularly, from the 1960s tract neighborhoods around Dalworth Park to the newer HOA subdivisions south of I-20. That matters because gate installation here isn’t a one-size-fits-all job. The soil, the wind, and the mix of residential and industrial gate types all shape how a gate should be built. When you call, you get Hal Gatewood or one of his crew on the phone, and you’ll see a live person at your property in the window we promise.
Key Takeaways
- Gate installation in Grand Prairie runs roughly $3,200-$8,900 for most residential driveway and security gates.
- Blackland Prairie clay moves. Post depth and compaction decide whether your gate still swings true in five years.
- We quote the price before work starts and it doesn’t change at the door.
- Every job carries our 90-Day Done Right Promise in writing.
- Seniors and veterans get a permanent 10% discount, no haggling.
Why Gatewood Fence & Gate Is Grand Prairie’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001 and never turned it into a franchise. The name is on the shop, the license number is published, and the address is no secret. That’s the accountability people in Grand Prairie tell us they’re looking for after a national company quoted one price over the phone and another at the door. We don’t work that way.
Our reputation around Grand Prairie is built on showing up. When a spring storm pops a photocell or a gate drags after heavy rain, we get the call because neighbors talk. The older neighborhoods especially have seen us reset gate posts, reweld hinges, and swap operators on gates that other companies wanted to haul off and replace entirely. Hal welds on site, in your driveway, because that’s what a repair-first gate company does.
We answer the phone with a person, 24 hours a day. Not a voicemail tree, not a call center. When your gate won’t open at 6 a.m. because the storm knocked out power and the manual release is seized, you want a voice, not an automated message. That voice is ours.
Our Gate Installation team also carries the right parts for the brands we service, so we’re not waiting on a distributor while your driveway is blocked. For Grand Prairie specifically, that means we stock Linear and Ghost Controls boards, Viking arms, BFT gear racks, and LiftMaster operator parts locally.
Our Gate Installation Services in Grand Prairie
Driveway Gate Installation
Most Grand Prairie residential work is driveway gates, and the split here is between single swing gates on compact older lots and slide gates on wider approaches in newer subdivisions. A swing gate needs a solid hinge post set deep enough to hold the leaf without sagging. A slide gate needs a level track bed and a rolling post that won’t bind when the clay under it shifts. We handle both, and we spec the operator for the cycle count the gate will actually see, not the cheapest box at the supply house.
Swing Gate Installation
Swing gates are common in Grand Prairie because so many driveways are flat and wide enough for a single leaf. The failure mode here is almost always the clay. Grand Prairie sits on Blackland Prairie soil that swells after spring rains and shrinks hard during 100°F summer droughts. That movement tilts hinge posts out of plumb within a few seasons. We set posts deeper and compact in lifts so the gate doesn’t drag the first time the ground gets wet. On a 1970s tract home near Dalworth Park, our crew reset a sagging ornamental iron swing gate after the original concrete footing heaved and cracked. We pulled the hinge post, poured a new 36-inch footing with a rebar cage, and re-hung the gate with a LiftMaster LA400 swing gate operator, then ran a full UL 325 entrapment check so the homeowners could see the safety photocell reverse before we left.
Sliding Gate Installation
Sliding gates are the workhorse along Grand Prairie’s commercial corridors. The Great Southwest Industrial District and the distribution buildup along SH 161 run heavy slide gates that cycle 50 to 100 times a day on dock entries and truck gates. A residential-grade operator rated for 300 cycles a year burns out in months under that load. We install slide gates with operators sized for actual duty cycle, and we set the track bed on compacted base so the gate rolls clean even when the ground under it moves.
Pedestrian Gate Installation
Pedestrian gates are the smaller cousin, but they fail the same way. A 4-foot walk gate with a lightweight frame and a shallow post will sag and scrape within two years in Grand Prairie soil. We build them right the first time, matching the frame and hardware to the gate weight, not to a price point. If you need a pedestrian gate keyed to the same access control as your driveway gate, we handle that too.
Serving Grand Prairie means knowing which gate styles the HOAs in South Grand Prairie allow, what the setback rules require near the public right-of-way, and what kind of automated access fits a property that backs up to a commercial corridor. That local knowledge is the difference between a gate that passes inspection and one that gets a love letter from code enforcement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grand Prairie
We service nine major gate brands, and for Grand Prairie customers we keep local stock on the ones we see most: Linear, Ghost Controls, Viking, and BFT. LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule are also in our service line. When a Viking arm fails on a commercial slide gate near I-20, we can often have the part in hand the same day because we carry it, not because we overnighted it from a warehouse three states away. That gets your gate back in service faster.
Common Gate Installation Problems We See in Grand Prairie Homes
- Clay heave tilts hinge posts out of plumb. Grand Prairie’s Blackland Prairie clay swells after spring rains and shrinks in summer heat, and a gate post set too shallow will lean within a few seasons. We set posts below the active clay zone and compact in lifts.
- Hail and ice storms crack operator enclosures and destroy exposed photocells. North Texas storms hit Grand Prairie hard, and we see a seasonal spike in operator failures after every hail event. Enclosures get brittle, photocells get shattered, and gates stop closing.
- Oversized solid infill gates catch wind and pull posts loose in saturated spring ground. A solid steel infill panel is basically a sail. In March and April, when the clay is soaked, wind load plus soft ground equals a leaning post. We engineer for wind load, not just gate weight.
- Undersized operators on industrial slide gates near SH 161. Commercial gates running 50-100 cycles a day destroy residential-grade operators in months. We spec operators for the actual cycle count and install them to survive it.
Pricing for Gate Installation in Grand Prairie, TX
Here are straight numbers for the Grand Prairie market, based on what we’re quoting right now:
- Single swing driveway gate (steel or ornamental iron, manual): $3,200-$5,500
- Single swing driveway gate with operator and safety edges: $5,400-$7,800
- Sliding driveway gate (steel or aluminum, manual): $3,800-$6,200
- Sliding driveway gate with operator and photocells: $5,800-$8,900
- Pedestrian gate (steel or aluminum, matching hardware): $900-$2,400
- Double swing gate (two leaves, operator): $6,500-$10,500
What moves the number is gate width, infill material, operator brand, access control (keypad, intercom, vehicle sensor), and whether we’re pulling the old gate or setting new footings in Grand Prairie clay. Every quote is line-itemed, and the price we agree on before work starts is the price you pay when we leave. No trip charge inside the county. Free estimates. Seniors and veterans get 10% off, permanently. Call (903) 829-4499 for a number that’s written down, not guessed.
We Also Serve Cities Near Grand Prairie
We work throughout the mid-cities and South Dallas County. If you’re in Euless, Duncanville, Bedford, or Hurst, we cover those areas too. The same crew, the same written promise, the same phone number. For gate work in and around Grand Prairie, Gatewood Fence & Gate is the local name to call.
Serving Grand Prairie, TX - Our Local Coverage Area
We’re based in the Grand Prairie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Grand Prairie
Gate posts in Grand Prairie should be set 36 to 42 inches deep, below the active clay zone that swells and shrinks with seasonal moisture change. We drill a larger hole, set the post with rebar reinforcement, and pour concrete with a small bell at the bottom so the clay can’t jack the post upward. Anything shallower than 30 inches will move within a few seasons in this soil. Call (903) 829-4499 and we’ll dig the hole the right way the first time.
Because the clay under the hinge post swelled and tilted the post a few degrees out of plumb. The gate itself is fine; the ground moved. That’s the most common false-alarm mechanical call we get in Grand Prairie after wet months. We reset the post, re-compact the ground, and the gate swings free again. If your gate is dragging, call us before you buy a new operator you probably don’t need.
Only if it’s built for wind load, not just gate weight. Solid steel or wood infill panels catch north Texas wind like a sail, and in saturated spring ground the posts can pull loose before the frame bends. For Grand Prairie we frame solid gates heavier than the catalog spec, weld the corner gussets, and set posts with larger concrete mass. If you want a solid gate, let us engineer it for the gusts we actually get here. Call (903) 829-4499 for a free measure.
The exact procedure depends on the operator brand, but every gate operator we install in Grand Prairie has a manual release that lets you open the gate by hand when the power is out. For LiftMaster and Linear swing operators, there’s a release key or lever on the arm. For sliding gates with Viking or BFT operators, you typically flip a lever on the gearbox housing to disengage the drive gear, then push the gate along its track. We walk every customer through this before we leave, and we label the release point. During a storm-related power cut, you don’t need to call us just to open the gate, but if the release is seized or the gate won’t budge, that’s a call to (903) 829-4499.
Yes, absolutely. Industrial slide gates along the SH 161 and Great Southwest Industrial corridors run 50 to 100 cycles a day, every day. That’s 18,000 to 36,000 cycles a year, and a residential operator rated for 300 to 500 cycles a year will burn out in weeks or months. We install commercial-duty operators with the right duty rating for the gate’s cycle count, and we service the Viking, BFT, and Linear equipment already running on those dock entries. If your gate is running constant cycles, don’t put a box-store operator on it. Call (903) 829-4499 and we’ll spec it correctly.
Get a Gate That’s Built for Grand Prairie
Wind, clay, heat, hail. Grand Prairie throws all of it at a gate, and the cheap-bid installs fail after one Texas storm season. We build for the ground we’re standing on and the weather we know is coming. Hal Gatewood’s name is on the shop and on every invoice. We answer the phone with a person, quote the price before the work starts, and stand behind every install with our 90-Day Done Right Promise in writing.
Call (903) 829-4499 for a free estimate on gate installation in Grand Prairie. Free measure, written price, no trip charge inside the county. Seniors and veterans save 10%, no questions asked.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie and the surrounding area since 2001.