Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair Services in Mansfield, TX
When your driveway gate stops opening in Mansfield, you usually know exactly why it happened: the ground moved. The black clay soil under this city swells and shrinks through every wet-dry cycle, and gates that were perfectly level in 2019 are now dragging, popping welds, or throwing the operator’s travel limits into fits. Hal Gatewood has repaired enough Mansfield gates to know that the hinge post is usually the culprit, not the motor. He’ll tell you over the phone what he thinks is wrong before he ever pulls up, and when you call (903) 829-4499, a live person answers. Not a recording. Not a first-ring transfer. You’ll talk to someone who knows which end of a gate post carries the load and won’t waste your time guessing wrong.
We’ve worked on gates in Heritage, South Pointe, Walnut Creek, and along Debbie Lane, plus our Arlington service area. The neighborhoods change, but the problem patterns don’t. You need a repair that lasts, a price you agreed to before the work starts, and a person you can find again if something isn’t right. That’s what we do. Read on for how we handle it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Mansfield Homeowners Choose Gatewood Fence & Gate
Hal Gatewood put his name on the shop in 2001, and the shop answers the phone around the clock. That’s the difference most Mansfield homeowners notice in the first five minutes. You’re not routed through a national call center or asked to press 2 for “gate services.” You call, Hal or one of his crew picks up, and you tell them what the gate is doing. They’ll tell you what they think it is, what it’ll cost, and when they can be there. If you’d rather talk in person, the shop’s address is published and Hal will meet you there. The name is on the invoice and the door, not just a logo on a truck that could be from anywhere.
Homeowners in Heritage and South Pointe call us because their HOAs require repairs that match the original finish and design, and Hal welds on site. That means a sagging ornamental gate doesn’t get hauled off to some shop across the Metroplex and returned two weeks later with mismatched scrollwork. It gets fixed in your driveway, with the same steel, the same rods, and the same paint or powder-coat match the HOA expects. We’ve also been called out to walnut Creek and Walnut Creek Canyon after other companies “fixed” a gate by swapping the opener when the post had moved an inch and a half. The gate failed again in three months. A gate sags in the hinge post, not in the middle, and that’s where we start.
Gate Repair Services We Offer in Mansfield
Every gate job falls into one of the services below, but most calls involve overlap: a post shifted, which pulled the operator out of alignment, which blew the control board’s travel limits. We handle all of it in one visit.
Gate Repair
This is the bulk of our work in Mansfield: sagging or dragging gates, snapped hinge welds, damaged pickets, bent top rails, and posts that have heaved out of level. We repair in place wherever possible, and we don’t swap a panel when the post is the real issue. The repair quote is the price you pay, agreed before any work starts.
Learn more about our Gate Repair in Mansfield.
Gate Installation
When a gate is beyond saving, or you’re adding a driveway gate where one never existed, we handle the full install: posts set to depth in Mansfield’s clay, gate fabricated or ordered to match your existing fence and HOA finish guidelines, and the operator wired and programmed. Installation is measured and scheduled, so we come out free to measure and write a firm price before any material is ordered.
Learn more about our Gate Installation in Mansfield.
Gate Motor & Opener
If the gate moves partway and reverses, beeps without moving, or opens on its own, the operator needs a look. We service and repair LiftMaster, FAAC, and BFT openers, reprogram travel limits, and replace burned control boards on site. If the operator is dead, we’ll tell you whether a rebuild or a replacement makes more sense, and the replacement quote is never a surprise.
Learn more about our Gate Motor & Opener in Mansfield.
Gate Access Control
Keypad entries, card readers, intercom panels, and vehicle-sensor loops all need periodic recalibration, especially after the seasonal ground shift nudges the gate leaf a few degrees. We troubleshoot Gate Access Control in Mansfield wiring at the panel and the gate, not just the keypad, because the problem usually isn’t where you’re pressing the buttons.
We service access control for Mansfield homes and small HOA entries. Call for a site visit and a written price.
Gate Parts & Welding
We keep common hinge brackets, bushings, wheel kits, and track hardware on the truck, and we handle Mansfield Gate Parts & Welding on site, so a damaged ornamental panel rarely needs to leave your driveway. If the part is obscure, we’ll order it, tell you when it lands, and schedule a single return trip. That’s the whole job.
You can also browse our home service overview for the full list of what we do across the south Metroplex.
Neighborhoods We Serve in Mansfield
We’re in and out of Mansfield weekly, serving Kennedale, TX as well, and we know the street layouts and gate styles in these neighborhoods without a map. Typical response for most midweek repair calls in Mansfield is same day or next morning.
- Heritage
- South Pointe
- Walnut Creek
- Walnut Creek Canyon
- McKnight Park area (near Historic Downtown Mansfield)
If your neighborhood isn’t listed, that doesn’t mean we don’t serve it. It means we kept this list honest instead of pasting the entire city onto a page.
Why Mansfield’s Climate & Housing Affect Gate Repair
Mansfield sits on Blackland Prairie clay, and that clay is the reason most of the gate repairs we do here are post-realignment and operator recalibration jobs rather than simple hardware failures. In a wet winter, the soil swells and pushes posts up and out of plumb. When the summer drought hits and the ground bakes hard, it shrinks away and the same post settles back, usually at a slightly different angle than it started. A double-leaf gate that misses its receiver by half an inch can trip the safety edge, wear out the hinge bushings, and eventually burn up the operator motor trying to push against a stop that no longer lines up. Mansfield’s 100°F-plus summer days also cook control boards and UV-brittle wiring in exposed conduit runs, so an opener that worked fine in May may throw a stuck-limit error by July.
The housing stock compounds this. Most of Mansfield’s homes were built between the late 1990s and the 2020s in master-planned, HOA-governed communities like Heritage, South Pointe, and Walnut Creek. Those neighborhoods feature ornamental steel or iron driveway gates in high volume, often with matching perimeter fencing, and HOAs expect any repair material to match the original finish closely. You can’t just slap a galvanized hinge bracket on a black powder-coated ornamental leaf and call it done. We weld, grind, prime, and finish to match the existing gate, and we keep the powder-coat and paint color notes from prior jobs in those neighborhoods so a touch-up call goes faster the second time.
One other Mansfield-specific pattern: February 2021’s Winter Storm Uri froze solenoids and cracked PVC conduit on hundreds of automated gates across the city’s newer subdivisions all at once. Entire streets in Walnut Creek couldn’t get cars in or out for days. We stocked cold-weather conversion kits and conduit repair materials after that and still get referral calls from those same streets when winter weather is forecast, because people remember which company showed up and fixed it without making them wait two weeks behind a parts order.
Pricing for Gate Repair in Mansfield
We quote a firm price before any work starts, and we stick to it. A basic hinge-bracket replacement or wheel-and-track adjustment in Mansfield typically runs $175-$325. Post realignment and welding, which is the common clay-soil call here, usually runs $350-$700 depending on post size, gate weight, and whether the operator needs reprogramming after we level things. Control board replacement on a LiftMaster or FAAC operator generally runs $280-$600, installed and programmed. A full operator replacement with a new arm and receiver usually runs $800-$1,600, depending on the gate and brand.
Every repair over $200 gets $40 off. There’s no trip charge inside the county, and active military, veterans, and seniors always get 10% off. Seniors and veterans don’t have to ask twice, and we don’t make you produce a folder of paperwork. You tell us, we apply it.
Service Area - Cities Near Mansfield
We’re based out of the Dallas-Fort Worth metro and schedule Mansfield work daily, but we also serve nearby communities including Arlington, Kennedale, Cedar Hill, and Duncanville. If you’re just outside Mansfield and your gate is down, call anyway, and we’ll tell you straight whether we can get there this week.
Serving Mansfield, TX - Our Local Coverage Area
We’re based in the Mansfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Mansfield
Most Mansfield gate repair jobs run between $175 and $700, depending on whether the post needs realignment and welding or just hardware replacement. Every job is quoted and agreed before any work starts, repairs over $200 carry $40 off, and there’s no trip charge inside the county. Call (903) 829-4499 for a specific quote on your gate.
Most Mansfield repair calls can be handled same day or next morning, especially when the gate is stuck open or closed. Call (903) 829-4499 and tell us what the gate is doing; we’ll give you a real answer on timing, not a four-hour window that quietly becomes next Thursday.
That’s the Mansfield clay doing what it does. The post or footing has shifted enough to knock the gate leaf out of alignment with the operator’s travel limits, and the opener either gives up or errors out. We realign the post, reweld the hinge if needed, reprogram the limits, and the gate works again. If the post is too far gone, we’ll tell you before we touch it, and you’ll know the replacement price upfront.
Yes. We set the posts to depth, run the low-voltage power from the house or an external transformer, mount the operator, install safety edges and photo eyes, and program the keypad or remote. Installation is scheduled after a free measurement visit and a written price, so there’s no guesswork and no surprise at the end. Call (903) 829-4499 to schedule a measure.
Cut power to the gate at the circuit breaker or disconnect and leave it off. A burning smell usually means a shorted board, a seized motor, or a wiring failure in the conduit, and continued power can damage the operator permanently. Call us at (903) 829-4499 and we’ll talk you through the safest way to secure the gate and get it repaired. If the gate is stuck open, we’ll prioritize the call.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mansfield since the shop opened in 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mansfield Customers Say
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo