Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair Services in Grand Prairie, TX
When a gate stops opening in Grand Prairie, you find out fast whether it was built for Blackland Prairie clay or just plopped down on top of it. We’re Gatewood Fence & Gate, and we’ve been untangling gate failures across this city long enough to know that what looks like a broken motor is often a post that’s drifted two inches out of plumb. A live person answers our phone 24 hours a day at (903) 829-4499, and when you call about a gate that won’t budge, you’ll talk to someone who knows the difference between a Grand Prairie soil problem and a supplier problem. Most repair calls in the city get a same-day visit from our crew, not a four-hour window from a call center three states away.
Key takeaways for Grand Prairie homeowners:
- Gate repair in Grand Prairie runs roughly $180-$340 for typical weld-and-align work, and $350-$900 when the operator or control board is involved.
- Around half of the “broken motor” calls we get in Grand Prairie turn out to be shifted posts, corroded hinges, or photocell damage from hail, not motor failure at all.
- Every job carries our 90-Day Done Right Promise in writing, and the price is agreed before we touch anything.
- We service nine major gate brands, including LiftMaster, FAAC, and Viking.
If you’re inside Grand Prairie and the gate is stuck, dragging, or refusing to close, call (903) 829-4499 now. Skip the webform. Hal picks up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Grand Prairie Homeowners Choose Gatewood Fence & Gate
Hal Gatewood started this shop in 2001, and his name is still on the door, the invoices, and the truck that shows up in your driveway. That’s not a branding gimmick in Grand Prairie. It means the guy who answers the phone is the same guy who built his reputation on fixing what other companies want to swap out. And it means when we tell you a repair comes with a 90-Day Done Right Promise, it’s Hal’s word, not a corporate fine-print loophole.
We work all over Grand Prairie, from the 1960s rambler neighborhoods around Dalworth Park to the 2000s-era HOA subdivisions across South Grand Prairie. In the older core, we’re usually called for ornamental iron gates heaving in original concrete footings. In the newer sections, it’s dual-swing and slide systems where the operator was undersized for the gate weight. Same problem in both eras: somebody built the gate for a postcard, not for Grand Prairie soil. We fix it correctly the first time.
Our guys are background-checked and uniformed, and the company holds a published license number anyone can look up. Grand Prairie customers also get a standing set of offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. We answer the phone with a live person around the clock, and the number is (903) 829-4499.
Gate Repair Services We Offer in Grand Prairie
Gate Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Hal and his crew weld on site in your Grand Prairie driveway, so the gate never leaves your property, and you’re not paying freight for a replacement panel that wasn’t needed. We repair what’s actually broken, secure what’s loose, and leave the rest alone.
Learn more about our Gate Repair in Grand Prairie.
Gate Installation
New gate work in Grand Prairie begins with the post layout and the footing depth, because Blackland clay doesn’t care what the seller’s spec sheet says. We set every post for the soil it’s going into, then hang the gate so it swings clean and true from day one. Our Gate Installation in Grand Prairie page walks through what a full install includes, from concrete to hinges to final alignment.
Gate Motor & Opener
Most opener failures we see in Grand Prairie are either undersized units or hail-cracked control housings with water inside. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we don’t sell you a new motor when the limit switch is the culprit. Start with our Gate Motor & Opener in Grand Prairie page for brand-specific notes.
Gate Access Control
Grand Prairie’s industrial corridors run gates 50-100 cycles a day, which means keypads, loops, and intercom wiring wear hard here. We install and repair access systems that are sized for actual traffic counts, not for a homeowner association brochure. A keypad that works under the Interstate 20 sun is a different animal than one that survives a suburban cul-de-sac. Free estimates are always available.
Gate Parts & Welding
Hal’s truck carries a welder, and he’d rather patch a forged hinge than sell you a cheap cast replacement that fails next spring. We keep common parts for Gate repair in Grand Prairie stocked locally, and for the odd stuff, our suppliers are a day out. If a piece can be welded, straightened, and serviceable for the next decade, that’s what we recommend. You’ll see the weld, and you’ll see the difference.
Neighborhoods We Serve in Grand Prairie
We run repair calls across the entire city. The neighborhoods below are a sample, not the whole map. If you’re in Grand Prairie, call us, and if we’re not already down the block, we’ll be on the way.
- Dalworth Park and the older Grand Prairie core
- South Grand Prairie HOA subdivisions
- Lake Parks and the I-20 corridor
- Grand Peninsula
- Westchester and the neighborhoods along SH 161
Most gate repair calls in Grand Prairie get same-day service, and emergency calls from the industrial districts near the Great Southwest Industrial District are routed immediately to (903) 829-4499.
Why Grand Prairie’s Climate & Housing Affect Gate Repair
Grand Prairie sits square on Blackland Prairie clay, one of the most expansive soils in North Texas. After spring rain, that clay swells and lifts; through a summer like the ones we get here, where 100°F is a Tuesday, it bakes and shrinks. Gate posts set shallow or without enough concrete ride that cycle like a bobber, tilting a quarter-inch a year until the gate drags, then binds, then won’t latch at all. We see it in the original ornamental iron gates around Dalworth Park, many of them set in footings poured during the Lyndon Johnson administration, and we see it in newer South Grand Prairie subdivisions where the developer’s installer set posts in fast-setting mix and called it a day.
And then there’s North Texas hail and ice. Hail doesn’t just crack the hood of your truck, it shatters photocell lenses and operator enclosures, letting water into electronics that fail a few weeks later, after the adjuster has gone home. Winter ice storms freeze gate tracks and snap brackets that were already stressed. The result is a dependable repair spike in Grand Prairie every spring and fall, and we schedule for it. If your gate is starting to catch at one corner or the opener is getting louder, that’s not noise, that’s a warning. Call (903) 829-4499, and we’ll come have a look.
Pricing for Gate Repair in Grand Prairie
Here’s what gate work typically runs in Grand Prairie, honestly:
- Weld repair (cracked hinge, snapped picket, sagging corner): $120-$260 per weld point depending on access and thickness
- Post reset or re-set in concrete: $280-$450 per post including concrete and alignment
- Opener/motor replacement or rebuild: $350-$900 including programming and safety checks
- Access control keypad or loop repair: $180-$450 depending on wire runs and hardware
- Full diagnostic visit with minor adjustment: $90-$150, applied to repair if we do the work
Every price is quoted and agreed before any work starts. No surprises, no bait. And remember: $40 off any repair over $200, plus no trip charge inside the county. Call (903) 829-4499 for an exact quote for your gate in Grand Prairie.
Service Area - Cities Near Grand Prairie
We keep trucks rolling through the neighboring cities too. If you’re in Euless, Duncanville, Bedford, or Hurst, the same live-answer phone and the same 90-Day Done Right Promise apply. Grand Prairie is home base for a lot of our work, but the shop covers the county.
Serving Grand Prairie, TX - Our Local Coverage Area
We’re based in the Grand Prairie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Grand Prairie
Most weld and alignment work in Grand Prairie runs $180-$340 per visit, while operator or control board replacements land between $350 and $900 depending on the brand and gate weight. The exact number depends on what we find, and you’ll know it before we start. Call (903) 829-4499 for a straight quote.
Yes. Call (903) 829-4499 and we’ll get a crew out for most Grand Prairie repairs the same day. Emergency commercial calls from the industrial corridors near I-20 and SH 161 are treated as urgent, because a stuck-open gate at a dock isn’t a nuisance, it’s a security hole. If you call after hours, a live person still answers.
Blackland Prairie clay swells with spring rain and shrinks through summer drought, slowly pushing shallow-set posts out of plumb over several years. Older ornamental gates in central Grand Prairie are especially prone because their original footings were often under-sized and poured before today’s soil movement data existed. A leaning post mimics a motor problem, and fixing the panel without the post means you’ll fix it twice.
Yes, we’re called out regularly to the warehouse and distribution centers along SH 161 and I-20, where heavy slide gates run 50-100 cycles a day. Those gates need commercial-duty operators and running gear, not a residential unit that’s rated for a few hundred cycles a year. We stock or quickly source the right components for high-cycle traffic. A live person answers at (903) 829-4499 around the clock.
We do. We’ll come evaluate the gate, write up the repair, and give you the number before anything is ordered or welded. If you already have a written estimate from another company, Hal will give a free second opinion. There’s no trip charge inside the county, and the quote doesn’t change at the door. Call (903) 829-4499 to schedule.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal has been fixing gates in the Dallas-Fort Worth area since 2001, and he answers his own phone.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grand Prairie Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly