Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
Gate installation in Bedford, TX usually takes one to two days once materials are on hand, and most of what we build lands between $2,800 and $8,500 depending on size, material, and whether we’re adding an operator. The bigger question for Bedford homeowners isn’t whether a gate can be installed, it’s whether the posts under it will stay put in this clay. Hal Gatewood has been working gates in Tarrant County since 2001, and he’ll tell you straight: in Bedford, the post is the job. The gate just hangs on it.
Most Bedford homes were built between the 1970s and early 1990s, which means thousands of original wood swing gates are hitting the end of their service life at the same time. Cedar posts rot at the soil line where Blackland Prairie clay holds moisture against the wood year-round. The gate looks fine until one morning it doesn’t. If you need a new gate in Bedford, call (903) 829-4499 and you’ll get a live person, not a phone tree.
Why Gatewood Fence & Gate Is Bedford’s Preferred Gate Installation Company
We’re not a franchise that sends a different crew every visit. Hal’s name is on the shop and on every invoice, and he’s been at this since 2001, long enough that half the gates he’s replaced were installed before he started. Bedford customers call us because we fix what other companies want to toss. That’s a real difference: if your gate post is rotted but your gate panel is solid, we’ll set a new steel post and re-hang your existing gate. Some outfits won’t touch a job that isn’t a full replacement. We’d rather save you two thousand dollars and earn the next call.
Every Bedford job carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back, no runaround. We answer the phone 24/7 with a live person, and the person who shows up is background-checked and wearing a uniform with our name on it. Not a contractor we met that morning.
We also understand Bedford’s gate failure pattern better than any out-of-town company could. Whole subdivisions off Central Drive and the Airport Freeway corridor are aging on the same schedule. The hinge posts that are failing on your street are failing on the next street too. The name’s on the shop, the shop’s down the road in the DFW mid-cities, and that’s the oldest accountability there is.
Our Gate Installation Services in Bedford
Driveway Gate Installation
Most Bedford driveway gates are swing gates, not sliders, because the typical lot here is a modest-frontage 1970s or 1980s tract home where a rolling gate doesn’t have room to travel. A new steel or aluminum driveway gate in Bedford typically runs $3,200 to $7,800 with posts, hardware, and basic automation. We set posts deeper than the original builders did, because we know what this clay does.
Pedestrian Gate Installation
Pedestrian gates next to the driveway are common in Bedford’s older brick-veneer ranch homes, and they take more abuse than anything else on the fence line. A welded steel pedestrian gate with new posts and a self-closing hinge setup usually runs $1,200 to $2,600 in Bedford. If you have a pool, we build to city code for self-latching requirements.
Sliding Gate Installation
Sliding gates show up on the larger lots and some commercial-adjacent properties around Bedford, especially where a driveway runs close to the property line and a swing gate would block the neighbor’s fence. A cantilever or track-style sliding gate in Bedford typically runs $4,500 to $9,000, depending on the opening width and whether you want a Viking or Linear operator. The ground here moves enough that track systems need careful base prep, and we don’t skip that step.
Swing Gate Installation
This is the bread and butter of Bedford gate work. Original wood swing gates from the 1980s are reaching the point where hinge boards split, posts rot at the clay line, and the gate sags until it drags on the driveway apron. A new steel swing gate with properly set posts and a BFT or Ghost Controls operator usually runs $3,500 to $7,500 in Bedford. We can also save and re-hang your existing gate if the panel’s worth saving, which a lot of the time it isn’t, and we’ll tell you honestly which way to go.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We install and service operators from LiftMaster, BFT, Linear, Viking, Ghost Controls, and the other major brands, so you’re not locked into whatever a big-box store happens to stock. More importantly, we carry control boards and safety parts that Bedford homeowners can’t get quickly from retail, which means when your 1990s operator dies, we can often replace the board the same week rather than scheduling a full operator swap two weeks out.
Common Gate Installation Problems We See in Bedford Homes
- Rotted cedar posts snapping at the soil line. The clay here holds moisture against the wood ten months a year, and when a North Texas ice storm adds weight, the post snaps below grade and the gate goes over. We see this constantly on Central Drive side streets and throughout the 76021 and 76022 zip codes.
- Clay heave throwing gates out of plumb every spring. Expansive clay swells with spring rain and shrinks in the summer drought. Hinge posts tilt, the gate binds against the latch post, and the operator strips gears or trips its clutch. Realignment without addressing the post footing is a temporary fix.
- Legacy operators with no entrapment protection. Gates installed before modern UL 325 safety standards went into effect often lack photocells or reversing edges. When the control board fails, replacement parts don’t exist, which means a new operator, which is often the better outcome anyway.
- Hinge mounting boards rotted behind the plate. Original builders lag-bolted hinges into a cedar trim board on the gate frame. That board rots from the back, the bolts pull loose, and the gate sags even though the hinges themselves look fine. Fixing the panel without addressing the board means fixing it twice.
Pricing for Gate Installation in Bedford, TX
Here’s straight talk on numbers. A basic single steel swing driveway gate in Bedford with welded frame, new posts, and manual operation runs $2,800 to $4,200. Add a quality operator like a LiftMaster or BFT and you’re at $4,500 to $6,800. A larger double gate or a sliding gate on a wide opening runs $5,000 to $9,000. Pedestrian gates are $1,200 to $2,600. What moves the number: steel gauge and frame design, operator brand, post depth and footing size, and whether we’re reworking the fence panel next to the gate or building from scratch.
Every quote is in writing before we start, and that quote is the price. We don’t show up and “find” extra charges. We offer $40 off any repair over $200, no trip charge inside Tarrant County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for a free estimate.
We Also Serve Cities Near Bedford
We install and repair gates throughout the mid-cities, so if you’re in Euless, Hurst, Grand Prairie, or Kennedale, the same crew covers your neighborhood too. And if you want to see the kind of Gate Installation work we do across the wider DFW area, the phone number is the same: (903) 829-4499. Our Gate Installation in Bedford page goes deeper on local neighborhoods and street-level stories if you want more detail before calling.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bedford
The post is moving, not the hinges. In Bedford’s expansive clay, hinge posts heave out of plumb seasonally, and the original cedar post from the 1980s or 1990s is likely rotted below the soil line where you can’t see it. The gate sags in the post, not in the middle. We can confirm it in about twenty minutes on site, and the fix is usually a new steel post set deeper in concrete, not a new gate. Call (903) 829-4499 and we’ll come look.
Sometimes, and we’ll tell you straight which way it goes. If the gate panel is structurally sound and the hinge post hasn’t rotted, we can reinforce the hinge mounting area and add a modern operator like a LiftMaster or Ghost Controls with safety photocells. But if the post is compromised, an operator adds weight and stress that will finish it off. In that case, retrofitting the gate without replacing the post means you’ll be back on the phone within a year. We’d rather do it once.
Blackland Prairie clay swells when spring rain saturates it and shrinks hard during summer drought. As the soil moves, the posts move with it: a gate that latches cleanly in June might bind at the latch by April because the hinge post tilted three degrees. It’s a cycle that has nothing to do with the gate hardware and everything to do with the ground under it. Houses built in the 1970s and 1980s in Bedford are especially prone because their original posts were set shallower than what we’d pour today. A properly bedded steel post breaks the cycle.
No. You replace the operator, not the gate, as long as the gate itself is sound. We see this all the time in Bedford: a 1990s operator fails, the brand stopped making that control board years ago, and a big-box store says the whole system needs to go. We carry current operators from Viking, Linear, BFT and others, and we can match a new opener to your existing gate in most cases. The one exception is when the gate was never built to modern safety standards in the first place, in which case adding modern entrapment protection is part of the retrofit. Call (903) 829-4499 and we’ll tell you what you actually need.
Automatic gates in Bedford must meet UL 325 safety standards, which means entrapment protection like photocells, reversing edges, or a contact sensor that stops and reverses the gate if something is in the way. Older gates without these protections can’t legally be fitted with a new operator until the safety side is addressed. We handle that as part of every automatic installation we do in Bedford, and we won’t sign off on a gate that doesn’t meet current code. That’s also why we carry the safety components locally, so the job doesn’t stall waiting on parts from out of state.
Call Gatewood Fence & Gate for Bedord Gate Installation
If your Bedford gate is sagging, binding, or just plain worn out, call us at (903) 829-4499. Hal will answer or call you back, look at what’s there, and tell you honestly whether you need a new post, a new gate, or just a rehang. The estimate is free, the price is in writing before work starts, and the 90-Day Done Right Promise applies to every job. The name is on the shop, and the shop is just down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford and the surrounding area since 2001.