Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bedford
Gate repair in Bedford usually comes down to one thing: the hinge post. Most Bedford homes were built between the 1970s and early 1990s, and the original cedar posts under those swing gates are now 30 to 50 years old. They rot at the soil line because Bedford sits on Blackland Prairie clay that holds moisture against the wood all year. When the post goes, the gate sags, binds, or snaps clean off. We fix it at the root, right in your driveway. Hal Gatewood has been doing this since 2001, and you can call us at (903) 829-4499 any hour. A live person answers.
Answer-First: What Bedford Gate Repair Actually Costs
A typical gate repair in Bedford runs $180 to $340 for hardware replacement, realignment, or operator troubleshooting. Hinge and post repair, which is the most common call we get in Bedford, lands between $320 and $650 depending on whether we’re resetting one post or two. Full operator replacement on a swing gate starts around $850. We quote the price before any work starts, in writing, and that’s the price you pay. No trip charge inside the county, and you get $40 off any repair over $200. Call (903) 829-4499 for a free estimate.
Key Takeaways
- Most Bedford gate failures start at the hinge post, not the gate panel itself.
- Blackland Prairie clay causes seasonal heave that throws gates out of plumb every year.
- We repair in your driveway, including on-site welding. No hauling your gate off.
- Every job carries the 90-Day Done Right Promise in writing, signed by Hal Gatewood.
- Upfront pricing. The quote you get is the price you pay. Seniors and veterans get 10% off permanently.
Why Bedford Gate Posts Fail at the Soil Line
Bedford is a fully built-out, landlocked mid-cities suburb. The bulk of residential development happened between the 1970s and early 1990s, which means thousands of original wood gate posts are aging out at the same time across the city. Those posts were set in the Blackland Prairie’s expansive shrink-swell clay. In spring, that clay absorbs rain aggressively and swells. In summer, it dries and contracts hard. The post gets worked back and forth season after season. Moisture sits against the wood at the soil line, and 30 years of that cycle rots cedar from the inside out.
Then an ice storm like February 2021 adds a heavy load, and the post snaps. That’s why post replacement volume in Bedford runs disproportionately high compared to hardware-only repairs. The gate itself often looks fine until the post goes. If you live off Central Drive or anywhere near the Airport Freeway corridor, you’re on the same clay. This is the single biggest gate problem in Bedford, and fixing it right means removing the rotted post, setting a new footing below the clay moisture line, and re-hanging the gate so it clears the ground and swings true.
Our Gate Repair Services in Bedford
Hinge & Post Repair
This is the service Bedford calls for more than any other. A gate sags in the hinge post, not in the middle, and that’s where we start. We pull the rotted post, set a new one in concrete below the clay line, and get the gate swinging properly again. In a neighborhood off Central Drive, we pulled a snapped hinge post from a 1970s ranch, reset the footing below the clay moisture line, and re-hung a LiftMaster swing gate operator with a new safety photocell. That’s a Bedford gate repair done the way it should be, fixed at the root instead of patched at the panel.
Gate Realignment
Bedford’s clay heaves and contracts every season, which throws swing gates out of plumb. The hinges bind, the gate drags on the driveway, or the operator starts tripping its reversing sensor. We realign the gate at the hinges, adjust the frame, and reset the operator limits so the system stops fighting itself. Fix the panel without the post and you’ll fix it twice. Realignment in Bedford is usually a same-day job, and it’s one of the most affordable repairs we do.
Electric Gate Repair
Electric gate openers in Bedford fail for predictable reasons. Clay movement shifts the gate, which overloads the motor. Moisture gets into control boards. Limit switches drift. We service LiftMaster, BFT, Linear, Viking, and Ghost Controls operators, and we carry common parts for Bedford’s most popular models. If your opener is reversing on its own, beeping, or refusing to close, call us before you force it. A gate closing on its own has a reason, and it’s usually a sensor or a limit issue, not a ghost.
Weld & Rust Repair
Bedford’s older ornamental gates are mostly steel, and 40 years of North Texas humidity and clay moisture takes a toll. We weld on site, in your driveway, so the gate never leaves your property. Rust repair, cracked welds, bent frames, broken hinge brackets. Hal has been welding since before a lot of Bedford’s gates were built, and the repair is done right in front of you. No hauling off, no mystery shop time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We’re certified to service Gate Repair systems from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Bedford, the most common openers we see are LiftMaster and BFT on residential swing gates, with Linear and Ghost Controls showing up on the older and solar-powered setups. We keep common parts for these brands stocked locally, which means faster turnaround for Bedford customers. When your opener goes down, you don’t want to wait a week for a board to ship from somewhere else.
Common Gate Problems We See in Bedford Homes
- Rotted cedar posts at the soil line: The Blackland clay holds moisture against the wood year-round, and 30-50 year old posts are failing across Bedford’s established neighborhoods, especially off Central Drive and near the Airport Freeway. The gate looks fine until the post snaps.
- Clay heave throwing gates out of alignment: Spring rains swell the soil, summer droughts shrink it, and the gate ends up binding on the hinges or dragging on the ground. Realignment is a recurring need in Bedford, not a one-time fix.
- Operators tripping the reversing sensor: When a gate shifts out of plumb, the opener works harder, and the safety sensors start false-triggering. The opener isn’t broken. The gate geometry is. Fix the alignment and the opener settles down.
- Ice storm damage to weakened posts: The February 2021 ice storm snapped a lot of Bedford gate posts that were already compromised at the soil line. If your gate leaned after that storm and has never swung right since, the post is post-gone.
Pricing for Gate Repair in Bedford, TX
Here’s what Bedford homeowners can expect, line by line.
| Service | Typical Bedford Price Range |
|---|---|
| Gate realignment and hinge adjustment | $180-$340 |
| Hinge and post repair (one post, reset in concrete) | $320-$650 |
| Weld and rust repair | $200-$480 |
| Operator repair or sensor replacement | $200-$500 |
| Full swing gate operator replacement | $850-$1,400 |
These are real numbers for Bedford’s market, not generic guesses. What actually affects the price: whether the post footings need to be dug below the clay line, the weight and span of your gate, and whether the operator can be repaired or is beyond saving. You get a written quote before we start, and that quote holds. No trip charge inside the county. Seniors and veterans get 10% off every job. Call (903) 829-4499 to get an exact number.
We Also Serve Cities Near Bedford
Our service area covers Bedford and the surrounding mid-cities communities, including Euless, Hurst, Grand Prairie, and Kennedale. If you’re in one of those cities and dealing with a gate that won’t close or a post that’s leaning, give us a call. We treat Bedford as our home turf, and we show up fast for the neighborhoods around it.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Bedford
Bedford’s Blackland Prairie clay holds moisture against the post year-round, which rots cedar from the outside in at the soil line. After 30 to 50 years, the post loses enough strength that a heavy wind gust or an ice storm snaps it clean off. The gate itself can look fine right up until that happens. The permanent fix is pulling the rotted post, setting a new one below the clay moisture line, and re-hanging the gate. Call (903) 829-4499 and we’ll take a look at it.
Yes. Seasonal clay movement throws Bedford gates out of plumb constantly, so realignment is one of our most common jobs. We adjust the hinges, reset the frame if needed, and calibrate the opener limits. Depending on how far the post has moved, we may recommend resetting the post footing at the same time, otherwise the gate will drift again next season.
For most Bedford lots, solar is practical as a backup or for gates that sit far from the house. A solar panel and battery can run a Ghost Controls or Linear opener on a standard swing gate without trenching power. On wide gates where the opener cycles multiple times a day, you’ll want a bigger panel and a good battery bank. We can spec that out for your gate and give you an honest take on whether solar or a mains run makes more sense.
Usually, it’s the gate binding from clay movement. When the gate drags or the hinges bind, the opener senses resistance and reverses. It can also be a dirty or misaligned photocell. We check the alignment first, then the sensors, then the opener. In Bedford, the gate geometry is the culprit more often than the opener itself. Call (903) 829-4499 for an exact diagnosis.
Yes. We do single-post replacement all the time in Bedford. We pull the rotted post, dig the footing below the clay moisture line, set a new post in concrete, and re-hang the existing gate. If the gate panel is still sound, there’s no reason to replace it. That’s the repair-first approach we’ve used since 2001. The estimate is free, and the price is set before any work begins.
Call Gatewood Fence & Gate for Bedford Gate Repair
If your gate is dragging, binding, or hanging by a prayer, call (903) 829-4499. A live person answers, day or night. Hal Gatewood’s name is on the shop and on every invoice. We’ve been fixing gates since 2001, and we stand behind every job with the 90-Day Done Right Promise. If it’s not done right, we make it right. You won’t get a call center, you won’t get a price that changes at the door, and you won’t get someone who’s never set foot in Bedford. You’ll get us. Call for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford since 2001.