Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Oak Cliff
A new gate in Oak Cliff typically runs $1,800 to $6,500 installed, depending on whether it’s a single driveway swing gate, a double gate, or a custom ornamental piece with automation. Most Oak Cliff installs take one to two days on site, and the quote you get up front is the price you pay before we ever strike an arc. If you live in Winnetka Heights, Kessler Park, or anywhere between Bishop Arts and the escarpment, call Hal at (903) 829-4499 and you’ll get a real person who knows the local clay soil and the old gates that sit on it.
We’ve been welding and hanging gates across Oak Cliff long enough to know this neighborhood punishes sloppy work. The black gumbo clay here heaves and shrinks through Dallas’s wet-dry cycles, and that means a post set in a shallow footing will lean within three seasons. Our crews bore footings below the active clay zone on every Oak Cliff install, and we fabricate hinges and pintles on-site when a 1940s hand-forged piece gives out. That’s the difference between a gate that works for 20 years and one that binds every August.
Why Gatewood Fence & Gate Is Oak Cliff’s Preferred Gate Installation Company
Gatewood Fence & Gate has been locally owned and owner-operated since 2001. Hal Gatewood’s name is on the shop and on every invoice. Not a franchise, not a rotating cast of subcontractors. When you call about gate installation in Oak Cliff, the person who answers is the person who stands behind the work. A live person answers 24 hours a day, seven days a week. No voicemail, no phone tree, no “somebody will call you back.”
Oak Cliff homeowners call us because they’ve been burned. They call a company with a polished website, get a $3,200 quote on the phone, and watch the crew hand them a $5,100 invoice at the door. That doesn’t happen with us. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print, no arguing about whether the problem existed before. And we offer a free second opinion on any written estimate you’ve gotten from another company.
We also know Oak Cliff’s stock of old gates better than anyone working out of a warehouse in north Dallas. The neighborhood’s craftsman bungalows and Tudor cottages from the 1910s through the 1940s have original ornamental wrought iron gates and fences that are decades past their useful life. Replacing or rebuilding those gates means understanding hand-forged hardware, matching vintage profiles, and fabricating parts rather than ordering a generic hinge off a shelf. Our crew does on-site welding, so your gate stays in your driveway where you can see the work happening.
Our Gate Installation Services in Oak Cliff
Driveway Gate Installation
Driveway gates across Oak Cliff run the spectrum, from modest tubular steel swing gates on mid-century ranch homes to heavy ornamental double gates on Kessler Park hillsides. We design, fabricate, and install driveway gates that match the architectural style of the house, because a generic aluminum gate bolted onto a restored craftsman bungalow looks like what it is: an afterthought. The price for a driveway gate in Oak Cliff typically runs $2,200 to $5,800, with automation adding $1,400 to $3,200 depending on the operator and access control you choose.
Pedestrian Gate Installation
Pedestrian gates in Oak Cliff are often the forgotten piece, a narrow walk-through next to the driveway that hasn’t latched properly since the Reagan administration. We build and set these to match the driveway gate and the fence line, with closers and strikes that won’t rattle when someone slams it at 6 a.m. Pedestrian gates in Oak Cliff typically run $650 to $1,800 installed, including the hinge posts set below the clay line.
Sliding Gate Installation
Sliding gates make sense on Oak Cliff properties where a swing gate would have to climb uphill or block the driveway when open. They’re also the right call on narrow lots where a double swing gate would crowd the house or the street. We install cantilever style sliding gates and track-guided models with operators from BFT and Linear, and we set the guide posts deep enough that the black gumbo doesn’t push them out of alignment. Sliding gates in Oak Cliff run $3,000 to $7,500 depending on track length, automation, and whether we’re building the gate from scratch.
Swing Gate Installation
Swing gates are the most common install we do in Oak Cliff, and the ones most likely to fail if the posts aren’t set right. On flat lots a single swing gate works beautifully. On sloped driveways like you find throughout Kessler Park, a swing gate needs careful hinge placement or it’ll bind come midsummer. We account for the grade, the heave, and the weight of the panel before we cut the first piece of steel. Swing gate installs in Oak Cliff run $1,800 to $4,200 without automation, and the post footings are always bored below the active clay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Oak Cliff
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you’re pairing a new gate in Oak Cliff with an operator, we’ll spec a BFT, Linear, or Viking unit sized to the weight and cycle count of the gate, not whatever came bundled in a box from a big-box store. We keep the parts Oak Cliff homes actually use, and we’ll install automation and access control on gates we build as well as gates that are already standing.
Common Gate Installation Problems We See in Oak Cliff Homes
- Shallow post footings that heave out of plumb. The black gumbo clay across Oak Cliff swells several inches in wet springs and shrinks in 100°F summers. A post set in a 2-foot footing will rock out of alignment within a few seasons, and every new gate we set gets footings bored below the active clay zone.
- Sloped driveways that cause swing gates to bind. In Kessler Park and Winnetka Heights, a swing gate that clears in March can bind by August because the driveway itself heaves and the gate panel warps. We set hinge geometry that tolerates the movement instead of fighting it.
- Failed hand-forged hardware on 1940s-60s ornamental gates. Oak Cliff’s older neighborhoods are full of wrought iron gates with hand-forged pintles and lag hinges that have no modern replacement part. A technician without fabrication skills will tell you to replace the whole gate. We’ll fabricate new hardware on-site to match the vintage profile.
- Undersized operators on heavy ornamental gates. A decorative double gate with cast accents weighs a lot more than a basic tube gate. Install an operator sized for the wrong weight and you’ll burn out the motor in a year. We size every operator to the actual gate panel, accounting for wind load on Oak Cliff’s exposed hillside lots.
Pricing for Gate Installation in Oak Cliff, TX
Here’s what we see in Oak Cliff, stated plainly. A basic single swing driveway gate starts around $1,800. A double gate for a wider driveway runs $3,400 to $6,000. A custom ornamental gate like the ones common in Kessler Park and Winnetka Heights runs $4,500 to $9,000 because of fabrication time and the precision hardware involved. Automation adds $1,400 to $3,200. Pedestrian gates run $650 to $1,800. Sliding gates run $3,000 to $7,500. Every quote includes the footings bored below the clay line, hardware, and labor. The price we quote is the price you pay, agreed in writing before any work starts. Call (903) 829-4499 and we’ll come measure, talk through what you actually need, and give you a written quote. Estimates are free.
We Also Serve Cities Near Oak Cliff
If you’re in Grand Prairie, Irving, Arlington, or Duncanville, we serve those areas too. Our crews work throughout the southwest side of the metro, and you’ll get the same owner-operated attention whether you’re looking for Gate Installation near Lake Cliff or a full custom gate in Kessler Park. Oak Cliff is home base for us on this side of town, and we know the neighborhoods, the soil, and the houses.
Serving Oak Cliff, TX - Our Local Coverage Area
We’re based in the Oak Cliff area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Oak Cliff
In Oak Cliff’s expansive black gumbo clay, we set gate post footings at least 36 to 48 inches deep, below the active clay zone that shrinks and swells through Dallas’s wet-dry cycles. A 2-foot footing will lean within a few seasons, which is exactly what we see when we get called to redo a gate that was installed wrong. Call (903) 829-4499 if your posts are already leaning and you want an honest assessment.
Yes, with the right hinge geometry and an operator sized for the panel weight and grade. Sloped driveways in Kessler Park put extra load on swing gate operators, especially in August when the ground has dried and the panel has warped slightly. We spec BFT and Linear operators for grade, wind load, and cycle count, and we set the posts so the gate clears through the full season. Call (903) 829-4499 for a free measure and a written quote.
We can rebuild it. The hand-forged pintles and lag hinges on 1940s-60s ornamental gates in Winnetka Heights have no direct modern replacement, so we fabricate new ones on-site to match the vintage profile and size. You keep the gate, keep the character of the house, and get hardware that won’t fail again for decades. Call (903) 829-4499 and send us a photo.
Yes, in most cases. The City of Dallas, which governs Oak Cliff, generally requires a permit for a new driveway gate when it exceeds the height of the existing fence or when it includes a concrete footer footprint beyond the current one. We’ll pull the paperwork and work with the inspector, so you don’t have to figure out the code on your own. Call (903) 829-4499 and we’ll sort out the details on the first visit.
It’s the clay. Oak Cliff’s black gumbo swells with spring rain and shrinks through the dry summer heat, so the posts tilt slightly, the grade shifts, and the gate panel warps in the heat. A gate that clears in March can bind completely by August if the footings are shallow or the hinge geometry is off. We fix this by boring footings below the active clay zone and resetting hinge pin angles to tolerate the seasonal movement. Call (903) 829-4499 and we’ll come look at the gate before it gets worse.
If your gate is leaning in the post, sagging on the hinge, or just done after 70 years of Oak Cliff weather, call Gatewood Fence & Gate at (903) 829-4499 for a free estimate. Hal Gatewood or a member of his crew will come out, measure, and give you a written price before any work starts. The 90-Day Done Right Promise is on every job, in writing, and one call brings him back. If it’s not right, we make it right. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Oak Cliff, TX since 2001.