Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Oak Cliff
Gate repair in Oak Cliff usually comes down to two things: the right part, and a weld that actually holds. We do both, and we do them in your driveway. If you’ve got a sagging swing gate on a Kessler Park hillside or a cracked ornamental iron gate in Winnetka Heights, we’ll come out, look at it, and tell you straight whether we can weld it back stronger or whether that post needs to be reset in deeper concrete. Call (903) 829-4499 and you’ll get a live person, not a queue.
We know Oak Cliff’s gates because we work on them year round. The clay soil here moves more than most homeowners realize, and it moves your gate posts with it. That’s the root of half the gate repairs we see.
Why Gatewood Fence & Gate Is Oak Cliff’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001, and he still runs it the same way: answer the phone, show up when promised, and fix the gate so it stays fixed. That’s why homeowners across Oak Cliff keep our number in their phones. When a gate won’t close on a Sunday evening and you’ve got a dog in the yard, you want someone who answers. We do, around the clock.
Our Gate Parts & Welding team works on gates throughout Oak Cliff, from the historic streets of Winnetka Heights to the ranch homes near Kiest Park. We’ve welded cracked iron gates in Kidd Springs, rebuilt sagging posts in Elmwood, and fabricated custom hinges for gates on the sloped driveways that line the Kessler escarpment. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Every job we do carries the 90-Day Done Right Promise in writing. If it’s not done right, we come back and make it right. No fine print, no argument. That’s how Hal has run things since day one.
Our Gate Parts & Welding Services in Oak Cliff
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. In Oak Cliff, the black gumbo clay heaves and shrinks with every wet spring and dry summer, pulling hinge posts out of plumb and tearing top hinge welds right off the frame. We cut out the old hinge, weld in a new one rated for the weight of your gate, and if the post has moved, we address that too. Fix the panel without the post and you’ll fix it twice.
Post Replacement
The biggest thing we do differently in Oak Cliff is how we set posts. A gate post sunk two feet into expansive clay will lean within a few seasons. We dig deeper, set the post in concrete below the active soil line, and brace it square before we weld anything to it. On a Kessler Park hillside driveway, we reset two leaning hinge posts for a 1960s ornamental swing gate using 4-foot-deep concrete footings to defeat the gumbo heave, then welded new custom lag hinges on-site to match the original hand-forged hardware. That gate swings silent through the next wet-dry cycle.
Rail Repair
When a top rail cracks or a bottom rail rusts through, the whole gate frame loses its strength. A sagging gate puts every bit of its weight on the latch side, and the rail is the first thing to go. We cut out the bad section, weld in a new rail, and grind it smooth so the repair disappears. On ornamental iron gates in Winnetka Heights, we match the existing pattern as closely as the original craftsman intended, because a patch that looks like a patch isn’t done right.
Custom Welding
Some gates in Oak Cliff can’t be saved with a parts catalog. A 1940s wrought iron driveway gate with hand-forged pintles and ornamental scrollwork doesn’t have a replacement hinge on a shelf anywhere. We fabricate those parts on-site. If your gate needs a custom bracket, a new pintle, or a section of scrollwork welded in, we do that work at your property, not in a shop across town. The gate stays where it belongs: in your driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Oak Cliff
We service gate openers and hardware from Linear, Viking, and DoorKing, along with six other major brands. When you need a replacement control board, a new limit switch, or a heavy-duty roller, we know which part fits and which one won’t. For Oak Cliff homes with custom gates, we keep common replacement parts on the truck, but we’ll also fabricate hardware when a mass-produced part won’t match your gate. That’s the difference between a parts swap and a repair that lasts.
Common Gate Parts & Welding Problems We See in Oak Cliff Homes
- Post lean from clay heave rips top hinge welds off every spring. The Vertisol clay under Oak Cliff swells several inches after spring rains, tilting gate posts and tearing hinges. We reset the post deeper and weld the hinge back stronger than the original.
- Grade-set gates on limestone escarpments bind at the latch when the drive slab shifts. On sloped driveways in Kessler Park and throughout North Oak Cliff, we see gates that open fine until the concrete slab settles a fraction of an inch downhill. Then the latch won’t line up and the operator stalls.
- Decorative 1930s-50s iron gates lose irreplaceable pintles. Original hand-forged pintles on Winnetka Heights gates simply don’t exist as replacement parts anymore. We fabricate new ones on-site to match the original hardware, so you don’t have to replace a beautiful gate with a generic aluminum one.
- August heat warps thin metal frames that were fine in March. Dallas summers don’t just dry out the soil; they expand metal gates enough to change clearances. A gate that swung freely in spring can bind at the latch by late summer. We adjust, reinforce, and if needed, weld in gussets to stop the flex.
Pricing for Gate Parts & Welding in Oak Cliff, TX
Here’s what you can expect to pay in Oak Cliff, and we quote every job before we start. Hinge replacement typically runs $180 to $340 per hinge, depending on gate weight and whether we need to weld reinforcement plate. Post replacement is the bigger job: $450 to $900 per post, which includes the deeper footing, concrete, and re-welding your gate to the new post. Rail repair usually lands between $250 and $500. Custom welding for ornamental iron runs $350 to $800, depending on how much fabrication is involved. We give you the number up front, we shake on it, and that’s the price you pay. No trip charge inside the county. $40 off any repair over $200. And a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for an exact quote.
We Also Serve Cities Near Oak Cliff
Our crews work throughout Oak Cliff and the surrounding area, including Grand Prairie, Irving, Arlington, and Duncanville. If your gate is giving you trouble and you’re in one of those towns, the same live-person phone line and the same 90-Day Done Right Promise apply.
Serving Oak Cliff, TX - Our Local Coverage Area
We’re based in the Oak Cliff area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Oak Cliff
Your gate isn’t sagging from the middle. The hinge post is leaning. Oak Cliff’s expansive clay soil heaves in spring, pushing against the post, and the post tilts a little more each year. Straightening the gate frame without resetting the post fixes the symptom, not the problem. Give us a call, and we’ll check the post first. Call (903) 829-4499 for an on-site assessment.
Yes. We weld the crack from the back side where possible, or grind and blend it so the repair follows the original pattern. On decorative iron gates from the 1940s to the 1960s, we often fabricate small matching pieces on-site rather than pulling a generic replacement off the truck. You won’t see a clunky patch.
Usually it’s the gate frame, not the operator. The metal expands in the heat, and if your gate was set tight on the hinge post, the clearance changes enough to bind. We check the alignment, the hinges, and the operator limits, then adjust or weld as needed. You may not need a new operator at all. We’ll tell you straight.
Yes. We set the post deeper than the original, generally 3 to 4 feet, so it sits below the moving clay. On sloped driveways, we also account for the grade so the gate hangs true. The post comes out, the hole gets dug deeper, and the gate goes back on square. Most post replacements in Oak Cliff take half a day to a full day, depending on access.
Yes. We install keypads, intercoms, and access control on existing custom gates throughout Oak Cliff. For ornamental iron gates, we can mount hardware discreetly so it doesn’t clutter the original design. Tell us what you want at the gate, and we’ll recommend a setup that works with your operator. Call (903) 829-4499 and we’ll walk you through it.
If your gate is sagging, binding, or cracked, call (903) 829-4499. We’ll pick up. We’ll come to Oak Cliff, look at your gate, and tell you what it needs. Then we’ll fix it so it holds.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Oak Cliff since 2001.