Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Rendon
Gate parts and welding in Rendon usually comes down to one thing: the Blackland Prairie clay under your gate posts. It swells when wet, shrinks when dry, and that movement works hinge bolts loose, racks gate frames, and throws operators out of alignment on an annual cycle. Our Gate Parts & Welding team knows this ground because we’ve been welding and rebuilding gates on Rendon acreage long enough to plan for the spring surge before it hits. Call (903) 829-4499 and a live person answers. Not a queue. Not a voicemail. Hal Gatewood’s name is on the shop, and he stands behind every weld with a written 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is Rendon’s Preferred Gate Parts & Welding Company
We’re the crew Rendon horse owners call when a 16-foot tubular steel gate drags across the caliche and won’t latch. That kind of work is different from suburban fence-line repair. The gate posts sit in expansive clay that moves a full inch or more between February and August. Most national outfits will sell you a new gate panel and send a bill. We rebuild the post footing, re-weld the hinge brackets, and true the leaf so it clears. Fix the panel without the post and you’ll fix it twice. Hal learned that the hard way, and now his crew won’t work any other way.
We answer the phone 24 hours a day. You won’t get a switchboard three states away. You’ll get a person, often Hal himself, who knows the difference between a GateWood hinge and a cheap import. Rendon customers also get a free second opinion on any written estimate from another company. Bring us the quote and we’ll look at it straight. $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Every job carries the 90-Day Done Right Promise in writing, not buried in fine print. If it isn’t right, one call brings Hal back. No runaround.
Our Gate Parts & Welding Services in Rendon
Hinge Replacement in Rendon
Rendon’s clay rehydration cycle is hardest on hinges. When wet winters swell the ground, hinge posts lean just enough to bind a swing gate against the latch post. Spring pulls the bolts loose from cedar ranch frames. We replace worn or seized hinges with heavier barrel hinges or adjustable weld-on hinge plates rated for wide horse-trailer gates. Then we verify the leaf swings level and latches true before we leave. A hinge is only as good as the post it’s bolted to, so we check both.
Post Replacement in Rendon
This is the foundation repair of gate work. A gate sags in the hinge post, not in the middle. On Rendon acreage we regularly set new posts with deeper, wider footings than the original. The point is to get below the seasonal shrink-swell zone so the post stops heaving. If a post has shifted more than an inch, we don’t shim it. We pull it, over-dig the hole, pour a footing that reaches past the clay’s active layer, and set the post plumb. Then re-weld or re-mount the hinge hardware. You pay once instead of every spring.
Rail Repair in Rendon
Tubular steel gates on long horse-property driveways take a beating from wind, livestock pressure, and the occasional bumper. Rails crack at the welds, sag, or separate from the pickets. We weld on site, in your driveway, without hauling the gate to a shop. On-site welding means the gate stays in place, you see the work happen, and downtime is measured in hours, not days. We re-weld cracked rails, square the frame, and reinforce stress points with gussets so the repair outlasts the original weld.
Custom Welding in Rendon
Not every gate part exists on a shelf. When you need a custom hinge bracket, a gate stop, a drop rod anchor, or a mounting plate for a solar panel on a steel post, we fabricate it. Hal has been welding since 2001 and his crew carries mobile welding equipment on every truck. That means a broken latch post on a ghost driveway entrance off Rendon Road gets repaired same trip, not quoted, scheduled, and forgotten. We also weld reinforcements onto older gates instead of selling you a replacement. Repair first. Replace only when it’s truly done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
Most Rendon acreage gates run on Linear, Viking, Ghost Controls, or DoorKing operators, and we service all four plus the full nine-brand list. More useful than the brand list: we keep common hinge barrels, latch springs, solar charge controllers, and limit switch kits on the truck when we roll into Rendon. If we don’t have it, we know the local supply houses that do. Solar-powered operators are common on long rural driveways where running mains power to the gate costs more than the gate itself. We service the operator bank, battery, panel, and wiring right alongside the steel work. One call, one trip, one person accountable.
Common Gate Parts & Welding Problems We See in Rendon Homes
- Clay heave tilts hinge posts every wet winter. The Blackland Prairie clay under Rendon swells dramatically when it rehydrates. Posts that were plumb in September lean by February, binding swing gates against the latch post or dragging them across gravel driveways.
- Spring soil movement loosens hinge bolts on cedar ranch gates. When the ground shifts, the wooden frame flexes. Hinge bolts pull free, the leaf sags, and the operator strains against the extra friction. We see this every March and April without fail.
- Solar operators on long driveways lose battery capacity under dust and partial shade. A dusted-over panel on a Rendon horse gate delivers a fraction of its rated charge. The battery degrades, the gate opens halfway, and it faults out mid-travel. We clean the panel, test the charge controller, and replace the battery bank when it’s done.
- Weld fatigue on wide farm gates. A 14 or 16-foot tubular steel gate on a windy pasture entrance flexes constantly. The welds at the rail-to-picket joints crack over years. If it’s caught early, we grind and re-weld. If it’s ignored, the rail separates and the whole frame racks.
Pricing for Gate Parts & Welding in Rendon, TX
You’ll know the price before any work starts. No floating estimates, no surprise line items at the door. In Rendon, hinge replacement on a standard swing gate typically runs $180 to $340 including hardware and labor. Post replacement runs higher because of the digging, concrete, and re-alignment: $450 to $900 for a single heavy gate post set deep enough to beat the clay. Rail repair and custom welding generally fall between $150 and $500 depending on the length of the crack, access, and whether we’re reinforcing or fabricating from scratch. We quote the job in writing and we honor it. That’s not a sales line. That’s how Hal runs the shop. Call (903) 829-4499 for a free estimate, and bring any competitor’s written quote for a free second opinion.
On a horse-property road off Rendon Road, we rebuilt the hinge post on a 16-foot tubular steel swing gate after winter clay movement had racked the leaf against its latch post. The operator was a LiftMaster LA400 running on solar with no mains power at the street, so we replaced the post footing with a deeper, wider pour and re-welded the hinge brackets to plumb before re-aligning the operator’s travel limits. The horse trailer now clears without the gate binding shut, even after a wet spring.
We Also Serve Cities Near Rendon
Gatewood Fence & Gate works throughout southern Tarrant County and the surrounding area. Beyond Rendon, we serve Grand Prairie, Irving, Arlington, and Duncanville. Same crew, same on-site welding setup, same written 90-Day Done Right Promise. If your gate is binding, sagging, or stuck, call (903) 829-4499 and a real person answers.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Rendon
Your hinges loosen because the Blackland Prairie clay under your gate post expands when it rehydrates in late winter and early spring, shifting the post and working the hinge bolts free from the wood or steel frame. The fix is not tighter bolts alone. The post footing needs to reach below the clay’s active shrink-swell zone, and the hinge hardware needs to be sized for a wide, heavy gate. Call (903) 829-4499 for an exact quote. Estimates are free.
We weld on site in Rendon. Our trucks carry mobile welding equipment, so the gate stays on your hinges and in your driveway while we work. We grind, fit, and weld the repair in place, then test the swing or slide before we pack up. No haul-off, no days of downtime.
Clay heave moves the hinge post, and the changed geometry pulls the operator’s travel limits out of sync. The operator is still trying to open to its old position, but the gate now binds earlier, so it faults out or runs hot. We re-set the post, re-true the gate leaf, and only then re-align the operator limits. Fix the frame first or the operator will fight itself until something burns out. Call (903) 829-4499 and we’ll diagnose it on site.
Yes. Any automated slide gate in Rendon needs both a vehicle loop detector and a paired set of safety photocells, even on solar power. The loop prevents the gate from closing on a horse trailer or a delivery truck, and the photocells stop the leaf if something crosses the opening. Solar changes nothing about the safety requirement. We install and wire both along with the battery bank and charge controller.
For a heavy swing or slide gate on Rendon clay, we typically go 36 to 48 inches deep and at least 12 to 18 inches in diameter, with the bottom of the footing flared wider than the top. The exact depth depends on the gate weight, the soil moisture at that spot, and whether it’s a horse-trailer gate or a pedestrian leaf. Shallow footings from original installs are exactly why so many Rendon gates bind by spring. We over-dig, pour deeper, and set the post plumb the first time. Free estimates at (903) 829-4499.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rendon and the surrounding communities since 2001.