Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Grand Prairie
Gate repair in Grand Prairie typically costs $185 to $480 for most residential jobs, and we’re usually at your gate within an hour. That’s the direct answer. But the longer answer matters more: Grand Prairie gates fail in specific ways, and if the person fixing yours doesn’t understand North Texas soil, wind load, and the sheer volume of commercial cycle traffic along the SH 161 corridor, you’ll be calling again in six months. We’re Gatewood Fence & Gate, and Hal Gatewood has been fixing gates since 2001. The name is on the shop, the phone gets answered by a live person, and if you’re in Grand Prairie, we’ll come take a look. Call (903) 829-4499 and you’ll get a straight answer, not a voicemail.
Why Gatewood Fence & Gate Is Grand Prairie’s Preferred Gate Repair Company
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Hal Gatewood founded this shop in 2001, and his name is on every invoice. When you call us from Grand Prairie, you’re not reaching a dispatch queue three states away. You’re reaching someone who knows that a gate off Dalworth Park built in the 1970s is going to have different problems than a swing gate in a South Grand Prairie HOA subdivision built in 2015. That matters. Gate Repair isn’t a side service for us, it’s the whole job.
Our 90-Day Done Right Promise runs on every single repair, written plainly on the invoice. If it’s not done right, one call brings Hal back, no runaround. And our reputation in Grand Prairie is built on that: we’ll fix the gate in your driveway rather than hauling it off, because we weld on site. We don’t swap parts that don’t need swapping. We don’t quote one price on the phone and change it at the door. The price you’re quoted before work starts is the price you’ll pay, period.
Response time to Grand Prairie? Most calls, we’re there within an hour. Storm damage calls after a North Texas hail event may take a bit longer because the whole metro is calling at once, but you’ll still talk to a live person the moment you dial. And we mean that, 24 hours a day, 7 days a week. Someone answers the phone, always.
Our Gate Repair Services in Grand Prairie
We service everything from residential ornamental iron gates in the older core near Downtown Grand Prairie to commercial slide gates running nonstop behind warehouses off I-20. The sub-services below are what Grand Prairie calls us for most. If your problem isn’t listed, call anyway. If it’s a gate, we fix it.
Electric Gate Repair
Electric gate systems in Grand Prairie take a beating from two directions: spring storms crack enclosures and destroy photocell sensors, and Blackland clay movement tilts posts until the operator is fighting itself to open the gate. We diagnose the electrical side and the structural side together. A new circuit board won’t fix a gate that’s binding because its post rotated in saturated clay. We service LiftMaster, BFT, Linear, Viking, and Ghost Controls controllers, plus commercial gear from FAAC and DoorKing.
Automatic Gate Repair
An automatic gate that starts misbehaving usually tells you something before it fails completely: it’ll hesitate, or stall halfway, or reverse for no reason. In Grand Prairie, we see operators burning out because their safety edge or loop detector was never re-tuned after a post shifted. That’s a $125 to $300 fix if you catch it. If it gets ignored until the motor burns out, you’re looking at a full operator replacement, starting around $450 and running up from there. Don’t ignore the hesitation.
Hinge & Post Repair
This is the most common repair we do in Grand Prairie, and it’s the one most other companies don’t want to touch. A gate sags in the hinge post, not in the middle. That’s where we start. The older neighborhoods here, especially the 1960s through 1980s tract homes near Dalworth Park and the surrounding streets, have wrought-iron gates set in original concrete footings. Those footings have been heaving and cracking for decades with the clay. We cut the old bolts, set a deeper footing, and re-hang the gate so it swings true. Fixing the panel without fixing the post means you’ll fix it twice.
Gate Realignment
After a brutal summer, we get call after call from Grand Prairie homeowners saying their gate suddenly drags or won’t latch. Nine times out of ten, the operator is fine and the post is the problem. Blackland clay swells after spring rains, then shrinks hard during drought; the post tilts, the gate binds, and the homeowner thinks the motor died. We re-shim the hinges, re-tune the operator’s travel limits, and often we can have the gate swinging clean again in under two hours. A realignment in Grand Prairie typically runs $160 to $310 depending on whether we’re resetting the post or just re-hanging the gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grand Prairie
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Grand Prairie, we keep common parts for BFT and Viking operators on the truck, because those show up constantly on the commercial slide gates along SH 161, and we stock Linear and Ghost Controls parts for residential swing and slide gate openers around the Lake Ridge and Westchester neighborhoods. If you need a part we don’t have in the truck, we’ll tell you up front how long it’ll take to get it, and we’ll quote the price before you commit.
Common Gate Repair Problems We See in Grand Prairie Homes
You’ll recognize most of these if you’ve lived in Grand Prairie for any length of time:
- Gate dragging or binding after a dry summer. That’s Blackland clay shrinking and letting the post settle or rotate. The operator often gets blamed, but it’s doing its best against a post that’s no longer plumb. We fix the post, not just the symptom.
- Hail-cracked operator enclosures and dead photocells. North Texas hail doesn’t just dent cars. It cracks plastic enclosures on gate operators, lets moisture in, and fries the safety sensors. After any serious spring storm, we run a spike in calls for exactly this.
- Worn hinges and dragging gates on older iron work. The single ornamental iron gates you see all over the older neighborhoods near Downtown Grand Prairie are 30 to 50 years old. Hinges wear, bushings oval out, and the gate starts to sag. It’s a straightforward repair if you catch it before the post moves.
- Slide gates jumping the rack. On both residential and commercial slide gates, a slightly tilted post or a loose guide wheel will throw the rack off the drive gear. The gate then stalls, grinds, or jumps. That’s the post telling you something, even if the motor sounds like the problem.
Pricing for Gate Repair in Grand Prairie, TX
Here’s what you can expect to pay in Grand Prairie, as of today, no games:
A typical hinge and post repair runs $185 to $380. That’s the single most common repair we do, and it includes re-hanging the gate and resetting the operator limits if needed.
Gate realignment runs $160 to $310. If we’re just re-shimming and adjusting, you’re at the lower end; if we’re resetting a post, the higher end.
Electric gate repairs run $140 to $480. A bad capacitor or limit switch is on the lower end; a full control board replacement is on the higher end. We’ll quote the exact price before any work starts.
Commercial slide gate work along the SH 161 corridor starts around $350 and can run to $1,200+ depending on the operator and the cycle load. We’ll tell you if the operator is spec’d wrong for your dock traffic.
Every estimate is free. The price we quote is the price you’ll pay, agreed before any work starts. And right now, seniors and veterans get a permanent 10% discount, plus $40 off any repair over $200. Call (903) 829-4499 for an exact quote on your gate.
We Also Serve Cities Near Grand Prairie
Gatewood Fence & Gate is based in the Dallas-Fort Worth metro, with crews working throughout Grand Prairie and the surrounding area daily. If you’re over in Euless, Duncanville, Bedford, or Hurst, we’ll come to you too. Same live-person phone line, same 90-Day Done Right Promise, same no-trip-charge inside the county.
Serving Grand Prairie, TX - Our Local Coverage Area
We’re based in the Grand Prairie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Grand Prairie
Because Grand Prairie sits on Blackland Prairie clay, which swells after spring rains and shrinks hard during summer drought. That shrink cycle pulls soil away from the post footing, the post rotates or settles, and the gate binds against the driveway or the striker. It’s a soil-movement problem, not an operator problem. We reset the post or shim the hinges, and the gate swings clean again. If yours is dragging, call (903) 829-4499 and we’ll come take a look, free estimate included.
Only if the operator was spec’d for commercial duty cycle from the start. Most residential operators are rated for 300 to 500 cycles per year, and the distribution centers along the SH 161 corridor run that in a week. When a residential-spec operator goes in, it burns out within months, and the gate locks out the dock until someone swaps the operator and re-tunes the loop detector. We spec, install, and repair commercial slide gate operators for exactly this traffic. If yours is flagging, call us before it strands a truck at the gate.
Every automatic gate operator has a manual release mechanism, usually a keyed handle or a pull cord on the motor housing. Disengage it only after the power to the operator is cut, and always open the gate slowly by hand; a gate swung hard manually can shear the release pin or bend the linkage. For slide gates, release the drive gear and push the gate along the track, never against the rack. If you can’t find the release or it won’t disengage, call us. High-tension springs and geared operators under load can cause serious injury if forced, and we’d rather walk you through it safely than have you hurt.
The original concrete footing has been moving with the Blackland clay for 40 years, and the hinge bushings have worn out. What’s changed is the cumulative effect: each drought-and-rain cycle rotates the post a fraction more, and eventually the gate drops enough to drag. It’s not age alone, it’s the soil. We cut the old bolts, set a new 24-inch footing with deeper embedment, and re-hang the gate with fresh hinges. The gate’s usually back to square within half a day.
Almost never. The post is the problem, not the gate itself. We cut the old post bolts, pull the post back to plumb or set a new one in a deeper footing, and re-hang the existing gate. Replacing the entire gate assembly is the answer you’ll get from a company that doesn’t weld on site or doesn’t want to deal with footing work. We fix the post and keep your gate. If yours is leaning, call (903) 829-4499 for a free estimate and we’ll tell you straight what it needs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie and the surrounding North Texas communities since 2001.