Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair Services in Glenn Heights, TX
A dead gate opener in Glenn Heights isn’t just an inconvenience. It leaves your truck stuck in the driveway, your trash cans stranded at the curb, or your fence standing wide open overnight. If you’re anywhere between Ovilla Road and the Southern Gateway, we can usually have someone at your gate within hours, not days. Call (903) 829-4499 and a live person picks up, day or night. Hal Gatewood has been fixing gates since 2001, and his crew knows Glenn Heights well enough to ask which county line you live on before we even talk price.
Most gate repairs in Glenn Heights are handled within a single visit. We bring the welder, the parts, and the opener diagnostics right to your driveway. The quote you get before we start is the price you pay when we’re done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Glenn Heights Homeowners Choose Gatewood Fence & Gate
We’re not a national chain. Hal Gatewood’s name is on the shop, his address is published, and when you call, you talk to a person who knows gates, not a phone tree. For nearly three decades, homeowners across the metro have called us because a neighbor did. The 90-Day Done Right Promise is written on every invoice: if it’s not done right, one call brings us back. No fine print, no runaround.
We answer the phone 24 hours a day, 7 days a week. Not a voicemail, not an answering service. When your gate fails at 10 p.m. on a Saturday and your fence is wide open to the street, you deserve to talk to someone who knows what a sheared roll pin sounds like over the phone. Hal’s customers in neighborhoods like Meadow Creek and Hidden Valley Estates know that call gets picked up.
Every tech that shows up is background-checked and wearing a uniform. Every job, from a sagging hinge post to a full opener replacement, gets the same repair-first approach. If the gate can be fixed in your driveway, we fix it there. We don’t haul it off to a shop, and we don’t sell you a replacement because it’s easier for us.
We’re certified to service nine major gate brands, including BFT, Linear, and Viking. That matters in Glenn Heights, where HOA spec gates come from a handful of manufacturers and knowing the hardware saves you a second trip.
Gate Repair Services We Offer in Glenn Heights
Gate Repair
We repair sagging gates, torn post hinges, broken weld joints, and gates that drag or bind. The work happens in your driveway, with an on-site welder when steel needs to be rejoined. We fix what’s failing, not the parts around it.
Learn more about our Gate Repair in Glenn Heights.
Gate Installation
When a gate has reached the end of its useful life, we install new ornamental iron and steel driveway gates built to match the HOA spec your neighborhood requires. The old gate is removed cleanly, and the new one is set, welded, and tested before we leave.
Learn more about our Gate Installation in Glenn Heights.
Gate Motor & Opener
We diagnose and repair automatic gate openers: control boards, limit switches, receiver antennas, and actuator arms. If your gate won’t open, won’t close, or reverses for no reason, we find the fault and quote the fix before any work starts.
Learn more about our Gate Motor & Opener in Glenn Heights.
Gate Access Control
Keypads, intercoms, vehicle sensors, and smartphone entry systems all fall under Gate Access Control in Glenn Heights. We service and install these systems and make sure they talk to your opener correctly.
Gate Parts & Welding
We keep the parts Glenn Heights needs: hinges, rollers, track wheels, cantilever hardware, actuator arms, and control boards. When steel breaks, our Glenn Heights Gate Parts & Welding team fixes it on the spot, without a trip charge and without hauling your gate across town.
Neighborhoods We Serve in Glenn Heights
We work throughout Glenn Heights, and we know which neighborhoods fall on which side of the county line. That matters when permits are involved. Typical arrival time anywhere in Glenn Heights is same day or next morning for most repairs.
- Meadow Creek
- Hidden Valley Estates
- West Park
- Arbor at Glenn Heights
- Southern Gateway
Why Glenn Heights’s Climate & Housing Affect Gate Repair
Glenn Heights sits on expansive black clay that heaves when it’s wet and cracks when it’s dry. That movement works against every gate post in your yard. A post set 24 inches deep in clay will lean out of plumb over a few years. When it does, the gate sags, the latch misses, and the opener arm starts to bind. We see this on both sides of the Dallas-Ellis county line, and the fix is always the same: reset the post deeper, pack the footing correctly, and re-square the gate on the hinge side. Patch the hinge without fixing the post and you’ll be calling us again in two years.
Most Glenn Heights homes were built between 1998 and 2015, inside HOA communities that required matching ornamental iron driveway gates. Those gates are now 15 to 25 years old, and they’re failing in clusters. One street in Meadow Creek will have three sagging gates in a week. The hardware is uniform from lot to lot, so when a specific hinge or opener model starts wearing out, we see it everywhere in that subdivision.
Any gate tech quoting automated opener work in Glenn Heights needs to confirm which county the property sits in before a major structural repair or opener install. A job on the Ellis County side may not require a permit, while the same job two streets over in Dallas County triggers a different inspection process. We check before we quote, so the price doesn’t change at your door.
Pricing for Gate Repair in Glenn Heights
Gate repair in Glenn Heights typically runs between $180 and $340 for common fixes like hinge replacement, post realignment, or opener limit switch adjustment. Full automatic opener replacement runs $950 to $2,200 depending on the actuator type and gate weight. A cut-and-rework weld job for a sagging gate is usually $280 to $420.
Every quote is agreed on before we start. The number we give you on the phone is the number on your invoice, unless we find something broken that changes the scope and we call you first to agree on it. We don’t show up and inflate the bill.
Standing offers that make this simpler: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. If you have a written estimate from another company, bring it to us for a free second opinion.
Service Area - Cities Near Glenn Heights
We work throughout the southern Dallas County and northern Ellis County area. If you’re in Grand Prairie, Irving, Arlington, or Duncanville, the same crew and the same phone number apply. Call (903) 829-4499 and Hal will point the right person your way.
Serving Glenn Heights, TX - Our Local Coverage Area
We’re based in the Glenn Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Glenn Heights
Most gate repairs in Glenn Heights run $180 to $340, with full opener replacements at $950 to $2,200. The exact price depends on what’s broken: a hinge is cheaper than a new actuator arm, and a weld repair is cheaper than a new gate panel. Call (903) 829-4499 and we’ll give you a firm number before any work begins.
Yes. Most gate repair calls in Glenn Heights get same-day or next-morning service, including weekends. We answer the phone 24/7, so when you call at 8 p.m., a person picks up and the truck rolls the next morning.
We confirm which county your property falls under before we quote any automated opener installation or major structural work. If a permit is required, we’ll tell you what’s needed and the project is scheduled with that step accounted for. The quote you get covers the work we’re doing, not surprises.
Usually not. A sagging gate in Glenn Heights is nearly always a post issue, not a gate panel issue. We reset the post, re-square the gate on the hinge side, and weld any broken joints. That’s a repair, not a replacement. We’ll only recommend a new gate when the steel itself is rusted through or the frame is racked beyond straightening.
Yes. Most neighborhoods here have deed restrictions requiring matching ornamental iron gates, and we work within those specs every day. If your HOA requires a specific finish, hardware style, or gate height, we’ll match it. Call (903) 829-4499 and we’ll come take a look.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Glenn Heights and the surrounding Dallas-Fort Worth metro since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glenn Heights Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks