Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Rendon
If you’re looking for gate installation in Rendon, TX, you’re likely dealing with one of two things: a property that needs a gate where none exists yet, or an older gate that’s failing and needs a straight answer on whether to repair - Rendon or replace. We’re Gatewood Fence & Gate, and we’ve been setting gates on Tarrant County acreage since 2001. Rendon’s clay soil, long driveways, and horse properties are ground we know well, which means we show up with the right post depth, the right operator, and a written price before any work starts. Call (903) 829-4499 and a live person answers, any hour, any day.
Why Gatewood Fence & Gate Is Rendon’s Preferred Gate Installation Company
We’re not a franchise and we’re not a call center. Hal Gatewood’s name is on the shop and on every invoice, and that’s the accountability that matters on Rendon’s acreage roads. The person who quotes your gate is the same person who shows up to install it or fix it, backed by a crew that’s background-checked and uniformed. Our Gate Installation team has seen more Rendon gate failures than we can count, and we fix the root cause instead of just the symptom.
Rendon homeowners tell us the same story: a company quoted one number over the phone, then a different one at the door. We quote upfront, in writing, and it doesn’t change. Every job carries the 90-Day Done Right Promise. If it’s not right, one call brings Hal back. No runaround, no fine print.
We stock Gate Parts & Welding - Rendon for Linear, Viking, Ghost Controls, and DoorKing operators locally, which means we’re not waiting on a shipment from three states away when your gate is stuck open or stuck shut. And if you want to meet the person who’ll do the work before you commit, that’s fine too. The shop is down the road, and you can drive there and look us in the eye.
Our Gate Installation Services in Rendon
Most Rendon properties aren’t getting a backyard privacy gate. They’re getting a working driveway gate on a long gravel or caliche drive, a gate on a horse pasture, or a pedestrian gate that actually closes properly. Here’s what we install most often around Rendon.
Driveway Gate Installation in Rendon
Driveway gates on Rendon’s acreage lots are practically standard equipment, not an upgrade. A typical driveway gate installation in Rendon runs $2,800 to $6,500 for a single swing gate with an automatic operator, depending on width, material, and whether we’re running power from the house or going solar. The long private drives off Rendon Road and the side roads branching toward the county line mean gate placement, swing clearance, and operator duty cycle matter more here than in a tight suburban lot.
Swing Gate Installation in Rendon
Swing gates are the most common gate on Rendon horse properties, and they’re the gate that fights your soil every single year. Blackland clay heaves, hinge posts lean, and a swing gate that was plumb in March is dragging by June. We set swing gate posts in deeper, belled footings than the old standard, because a post that moves with the clay will fail the gate every time. A swing gate post set properly costs a little more up front and a lot less over five years.
Sliding Gate Installation in Rendon
Sliding gates handle Rendon’s soil movement better than swing gates because they ride on a track rather than hanging from posts that heave. On gravel driveways where the ground isn’t perfectly level, a slide gate with a proper rack-and-pinion drive often outlasts a swing setup. Slide gate installation in Rendon typically runs $3,500 to $8,000 with operator, and it’s the call we make when a driveway has a steep grade or limited swing clearance.
Pedestrian Gate Installation in Rendon
Pedestrian gates get overlooked until someone’s walking through the horse gate every morning in the dark. We install pedestrian gates that match the driveway gate, that latch positively, and that don’t sag in the first wet spring. A simple steel pedestrian gate in Rendon runs $800 to $2,200 installed, depending on width and whether it’s tied into existing fence or set as a standalone unit. If it’s adjacent to a driveway operator, we wire a Rendon Gate Access Control pedestrian loop or keypad so you don’t have to open a 16-foot gate just to walk to the mailbox.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We service gates and operators from nine major brands, and for Rendon customers we keep parts in stock for the ones we see most often on local acreage: Linear, Viking, Ghost Controls, and DoorKing. That means when your Linear board dies on a Sunday, you’re not waiting on a Monday shipment. We also work on LiftMaster, FAAC, BFT, Elite, and Mighty Mule. If your operator predates any of those brands, call anyway. We’ll tell you honestly whether it’s worth saving.
Common Gate Installation Problems We See in Rendon Homes
After more than two decades of gate work on Rendon’s acreage, certain failures show up over and over. Here’s what we see most.
- Clay heave pulling posts out of plumb. Rendon’s Blackland Prairie clay expands dramatically in wet winters and shrinks in summer droughts. A post set in a shallow straight-sided hole will lean 2 to 3 inches in a single season, and that binds a swing gate shut or snaps hinge bolts loose.
- Obsolete operator boards with no entrapment protection. Gates hung in the 1990s and early 2000s often have control boards that predate modern UL 325 safety requirements. No photocells, no reversing edge, no obstruction sensor. Some of those boards can be retrofitted. Some can’t, and we’ll tell you which before you spend money.
- Worn rack and pinion on slide gates. Long gravel driveways in Rendon put steady wear on slide gate track systems. When a rack gets worn, the gate jerks, the operator strains, and the motor burns out earlier than it should. That’s a replace-it-now fix, not a wait-and-see fix.
- Cedar gates sagging and dragging on gravel. Untreated cedar warps under Texas sun, and a gate that drags on caliche wears out its hinges faster than it wears out its boards. We see ranch gates where the wood looks fine but the frame underneath has pulled apart. The gate sags in the hinge, not in the middle.
Pricing for Gate Installation in Rendon, TX
Here are real numbers for Rendon’s market. A basic single swing gate with a manual latch runs $1,800 to $3,200 installed. Add an automatic operator and you’re at $2,800 to $5,500 for a solid steel or ornamental iron gate. A full slide gate with operator on a graded gravel drive runs $3,500 to $8,000. A solar operator setup, common on acreage where there’s no power at the gate, adds $600 to $1,400 depending on panel size and battery bank. Pedestrian gates run $800 to $2,200.
What moves the number: gate width, material, post depth for your soil, power availability, and whether we’re removing an old failed gate. You get the price up front, in writing, before we break ground. Standing offer: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for a free estimate on your specific gate.
We Also Serve Cities Near Rendon
Our crews work throughout southern Tarrant and northwest Ellis County. In addition to Gate Installation in Rendon, we regularly serve Grand Prairie, Irving, Arlington, and Duncanville. If you’re on the edge of Rendon near the county line, call and we’ll tell you straight whether you’re in our service area and when we can be there.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Rendon
If the post is leaning because the clay heaved it out of plumb, straightening it without fixing the footing is a temporary patch and you’ll be calling us again next spring. A post that leans yearly needs a deeper, belled footing that reaches into stable soil below the expansion zone. We can sometimes straighten a slightly out-of-plumb post and pack it with stabilizing gravel, but if it’s moved more than an inch and a half, we’re pulling it and setting it right. Call (903) 829-4499 and we’ll look at what you’ve got before recommending anything.
Sometimes, yes. If the operator has a compatible control board slot, we can add photocells and a reversing edge. But many 1990s boards don’t support modern entrapment protection, and retrofitting them means a full board replacement that costs nearly as much as a new operator. On a horse property with kids, animals, and equipment passing through, a gate that can’t detect an obstruction is a serious hazard. We’ll tell you honestly whether your old board is worth retrofitting or whether replacement is cheaper in the long run. Call (903) 829-4499 for a straight answer.
Yes, generally. Slide gates ride on a track along the ground instead of hanging from posts, so they tolerate Rendon’s clay heave far better than a swing gate that depends on two posts staying plumb. If your driveway has a steep grade or poor drainage, a slide gate often lasts longer. The trade-off is that slide gates need a clear run of fence line to slide into, and the track needs to stay clear of gravel buildup. We’ll help you weigh which design fits your specific driveway. Call (903) 829-4499 to talk it through.
Yes, and we do it regularly on Rendon acreage where the gate is a hundred yards from the house panel. A solar kit with a deep-cycle battery runs a single swing gate operator reliably even through cloudy North Texas winters, as long as the panel is sized right and mounted clear of tree line. Solar adds $600 to $1,400 over a standard hardwired install. We’ll spec the panel and battery for your gate’s duty cycle, not just sell you a generic kit. Call (903) 829-4499 for a quote on your layout.
If the hinge post is solid and only the gate frame has pulled apart, repair is usually cheaper, often $400 to $900 to square the frame and re-hang it. If the post itself is rotted or leaning from clay heave, you’re looking at a new post and footing anyway, and at that point the honest math often favors a new gate. A new steel gate on a properly set post runs $1,800 to $3,200 and won’t sag the way cedar does after a few Rendon summers. We’ll show you both numbers and let you decide. Call (903) 829-4499 for a free estimate.
If you’ve got a gate question in Rendon, don’t sit on it. The longer a leaning post sits, the more it costs to fix. The longer a failing operator runs without a photocell, the bigger the risk. Hal Gatewood and his crew have been setting gates on Tarrant County clay since 2001, and we’ll give you a straight answer, a written price, and a gate that stays plumb through the wet and dry cycles that beat up everything else around here. Call (903) 829-4499 now for a free estimate, or to get a live person on the line about your gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rendon and surrounding Tarrant County since 2001.