Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rendon
Gate repair in Rendon usually costs between $180 and $720 for most hinge, post, and operator issues, with same-day service available for genuine emergencies like a gate stuck open or a horse property left unsecured. If your swing gate is binding, your opener is faulting, or a post has leaned after the last rain, we can get it straightened out, welded, and aligned, usually in one visit. Call (903) 829-4499 and a live person answers, any hour.
We know Rendon, not as a pin on a map, but as the unincorporated acreage community it is. Long private driveways off Rendon Road, horse fencing, caliche lanes, and gates that have been through twenty or thirty clay seasons. That local knowledge matters because a gate hanging on Blackland Prairie clay isn’t failing the same way a gate fails in a subdivision up in Arlington. We start there.
If you want a second opinion on a written estimate, we’ll give you one free. No trip charge inside Tarrant County. And every job carries our 90-Day Done Right Promise, in writing, with Hal Gatewood’s name on it. That’s not a slogan. That’s how we’ve run the shop since 2001.
Key Takeaways
- Most Rendon gate repairs run $180-$720, with the price quoted and agreed before we touch a wrench.
- Blackland Prairie clay heave is the single biggest reason gates fail here, and we address the post before the panel.
- We service nine major gate brands, including BFT, Linear, Viking, and Ghost Controls operators on Rendon horse properties.
- One visit usually handles the repair, because the welding happens in your driveway, not at some far-off shop.
- Call (903) 829-4499. A live person answers, 24/7, and Hal stands behind every job with a 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is Rendon’s Preferred Gate Repair Company
There are companies that fix gates, and then there is a shop with a published address and a license number anyone can look up. Hal Gatewood founded Gatewood Fence & Gate in 2001, and he still picks up the phone. When you call about a seized gate on a horse property off Rendon Road, you’re not talking to a dispatcher in another state. You’re talking to the people who will actually show up.
Rendon customers call us for a few reasons. We weld on site, so a broken hinge or a cracked post doesn’t mean hauling your gate to some industrial park. We answer calls with a live person around the clock, which matters at 6:00 a.m. when the gate won’t open and the horses need feeding. And we’re background-checked, uniformed, and local, not a franchise that sends somebody different every time.
Our repair-first philosophy is simple: fix the gate in your driveway, replace only what actually needs replacing, and stand behind it. If it’s not done right, one call brings us back. That’s the 90-Day Done Right Promise, and it’s stamped in writing on every invoice. No hedge language, no runaround.
Our Gate Repair Services in Rendon
Electric Gate Repair
Electric gate operators on Rendon acreage properties take a beating from heat, dust, and voltage spikes. When a control board fails on a 2000s-era opener, we diagnose it first rather than quoting a full swap. Motor capacitors, limit switches, and receiver boards are all serviceable on most BFT, Linear, Viking, and Ghost Controls units. If a retrofit is the cheaper honest answer, we’ll say so plainly, and we’ll price it before any work starts.
Automatic Gate Repair
Automatic gate repair in Rendon often comes down to one thing: soil movement. The Blackland Prairie clay swells in wet winters and shrinks in summer droughts, and every cycle tilts posts a little more. That throws operators out of their travel limits, trips the sensors, and leaves the gate creeping open or refusing to close. We reset the limits, re-level the post, and recalibrate, so the operator stops fighting the dirt and starts working with it. On older operators from the 1990s and 2000s that lack modern UL 325 entrapment protection, we’ll explain honestly what can be retrofitted with safety photocells and what’s better replaced.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. In Rendon, where wet springs and dry summers heave the clay underfoot, hinge posts lean and hinge bolts pull loose from wooden frames on 1970s and 80s ranch gates all the time. We dig out the old footing, pour a deeper concrete base with rebar where the load demands it, and re-hang the gate with longer weld-on hinges. Fix the panel without the post and you’ll fix it twice, and we’re not interested in selling you the same repair twice.
Gate Realignment
When a swing or slide gate drags across a caliche driveway, it’s usually not the gate bending so much as the post shifting beneath it. We use levels and drop measurements, not guesswork, to find where the post has moved, then weld or shim accordingly. For slide gates with rack and pinion drives, dust and heat accelerate wear on rollers and motor capacitors, and a shifted post can make the rack jump teeth. We check the rack, the pinion, the rollers, and the post in the same visit, because fixing just one of those is how you end up calling again next month.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Rendon horse properties, we see a lot of BFT and Linear operators on the older estates, and plenty of Ghost Controls and Viking units on the newer custom builds. We try to keep common parts on hand, because nobody wants to wait a week for a control board while their driveway stays open. If we need to order something specific, we’ll tell you up front how long it’ll take and what it costs, before you agree to anything.
Common Gate Repair Problems We See in Rendon Homes
- Clay-heaved hinge posts. Wet winters swell the Blackland Prairie clay, tilting posts a few degrees into the driveway. That binds swing gates shut and pulls hinge bolts loose from wooden ranch-gate frames, especially on older 1970s-80s properties.
- Obsolete control boards on legacy operators. 1990s and 2000s gate operators often lack modern UL 325 entrapment protection. Heat, dust, and voltage spikes kill the boards, leaving horse properties locked out or gates creeping open on their own.
- False triggers on loop detectors. When a post shifts, a loop detector can read false triggers every cycle. The operator faults on travel limits, and the gate starts stopping halfway or reversing for no reason. We see this constantly on the horse-property roads throughout Rendon.
- Rack and pinion wear on slide gates. Long gravel and caliche driveways throw dust into the rack, and summer heat accelerates roller and capacitor wear. A slightly shifted post makes the rack jump teeth, which sounds awful and strains the motor until something gives.
Pricing for Gate Repair in Rendon, TX
Here’s the straight answer on money. Basic hinge and post repairs in Rendon typically run $180 to $340, depending on how far the post has moved and whether we’re digging a new footing. Automatic gate operator repairs, including control board replacement or limit recalibration, run $240 to $520 for most residential units. Full gate realignment, which often includes welding and a new post pour, runs $400 to $720 on heavier ornamental iron and ranch-style gates. A complete operator replacement on an older system can push over $900 if we’re retrofitting modern safety edges and photocells, but we’ll always quote the repair first and tell you honestly when replacement is the cheaper long-term answer.
The price we quote is the price you pay, and it’s agreed before any work starts. We don’t quote one number on the phone and another at the door. Standing offers: $40 off any repair over $200, no trip charge inside Tarrant County, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. You don’t haggle for those. They’re just what we do.
We Also Serve Cities Near Rendon
If you’re searching for Gate Repair near Rendon, chances are you or someone you know lives just up the road. We run the same crew, same service, and same 90-Day Done Right Promise into Grand Prairie, Irving, Arlington, and Duncanville on the same schedule. A lot of our Rendon customers send us to their kids’ places in town. Same phone: (903) 829-4499.
Why Blackland Prairie Clay Breaks Gates Here
This is the part nobody tells you, and it’s the reason so much gate repair work in Rendon gets done wrong the first time. The clay under this part of southern Tarrant County isn’t like the sandy loam you find just north around Mansfield proper. Blackland Prairie clay swells dramatically when it takes on water, then shrinks and cracks when summer bakes it dry. Every cycle moves the ground under your gate posts, and every move tilts the post a fraction more.
Show me the gate closing on its own and I’ll show you where it’s failing. On horse-property roads off Rendon Road, we see a predictable spring surge in service calls after the clay rehydrates from winter rain. Posts that held fine through the drought lean into the driveway overnight. Gates bound shut. Hinge bolts pull loose from wooden frames on those 1970s ranch gates. Automatic operators fault on travel limits every single cycle because the post moved and the loop detector started reading false triggers from the shifted metal.
We pulled up to a horse property off Rendon Road where an early-2000s ornamental iron swing gate had seized shut after spring rains. Our tech found the hinge post leaning a full four degrees into the driveway, the LiftMaster operator faulting on travel limits every cycle because the loop detector was reading false triggers from the shifted post. We dug out the old post footing, set a new deeper concrete pour with rebar, re-hung the gate with longer weld-on hinges, and reprogrammed the operator limits. The gate swings clean now, and the safety photocells sit perfectly level again.
That’s the kind of fix that only works if you understand what the soil is doing. A post set at a safe depth in sandy loam will hold. The same post set at that depth in Rendon clay is a hinge waiting to fail. So we set posts deeper here, with rebar where the load demands it, and we don’t pretend a gate is fixed just because the panel is straight.
Legacy Gates and Older Operators: Repair or Replace?
Rendon has a lot of gates that were hung before modern safety requirements existed, and a lot of operators that were installed in the 1990s and 2000s. Those older systems can often be repaired, which is the honest route when the bones are still good. A worn hinge, a tired capacitor, a limit switch that’s drifted, these are all fixable without replacing the whole gate.
But there’s a line, and we’ll tell you where it is. An operator from 1995 that only has a reversing edge doesn’t meet current UL 325 entrapment protection standards. If that unit fails in a way that makes it unsafe, retrofitting it with a new control board and modern safety photocells can get expensive fast, and sometimes the cheaper long-term answer is a new operator that already meets code. We’ll show you the numbers on both sides and let you decide. We’re not selling you a replacement because it’s easier for us. We’re telling you what we’d do if it were our gate, which in a lot of cases around Rendon, it could be.
The same goes for a gate panel that’s been welded three times and rusting from the inside. We’ll weld it again if that’s what you want, but we’ll also tell you honestly when a new panel is cheaper over the next five years. Our job is to make the call with you, not for you.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Rendon
Because the Blackland Prairie clay under Rendon swells when it takes on spring rain, and that swelling tilts your hinge post a few degrees into the driveway, binding the gate. Mansfield sits on sandier loam that drains differently and moves less, so the same gate there tends to hold. In Rendon, we set posts deeper and in concrete with rebar where the load demands it, because that’s the only way to stop the annual cycle. Call (903) 829-4499 and we’ll tell you exactly what your post is doing.
No, a reversing edge alone doesn’t meet modern UL 325 entrapment protection requirements, which call for monitored safety devices like photocells or a proper entrapment sensing system. You can often retrofit an older operator with a new control board and safety photocells, but on a 1995 unit the retrofit can approach the cost of a replacement. We’ll quote both and give you an honest recommendation, with the price agreed before any work starts. Call (903) 829-4499 for a free estimate.
Sometimes, but only if the post hasn’t actually shifted. A gate sags in the hinge post, not in the middle, and in Rendon’s clay, the post is usually the culprit. If the post is still solid and level, we can weld on longer hinges or shim the existing ones. If the post has leaned, which is common after wet winters here, the honest fix is to dig out the old footing, pour a deeper base with rebar, and re-hang the gate. We’ll show you what we’re seeing before we recommend one over the other. Call (903) 829-4499 and we’ll take a look.
Partly, yes. Rendon winters are shorter and cloudier, so a solar panel that keeps up in July may not recharge the battery enough in December and January, especially if the panel is shaded or covered in dust. But it’s often not just the panel. Cold weather stresses older batteries and control boards, and if your gate’s post has shifted, the operator works harder every cycle, draining power faster. We check the panel, the battery, the board, and the gate’s mechanical load in the same visit. Call (903) 829-4499 for an exact diagnosis.
If the gate jumps teeth or makes a grinding sound, but the rack and pinion teeth still look square and full, it’s likely the post has shifted and thrown the alignment off. If the teeth are rounded or missing chunks, that’s wear, usually from dust and heat on Rendon’s long gravel driveways. We measure the post, inspect the rack, and check the pinion gear in the same visit, then tell you which fix is actually needed. Call (903) 829-4499 and we’ll give you the straight answer.
Call Gatewood Fence & Gate for Gate Repair in Rendon
If your gate is binding, sagging, or refusing to close, call us. Hal Gatewood’s name is on the shop and on every invoice, and he’s been at this since 2001. A live person answers at (903) 829-4499, any hour, any day. We’ll give you a straight answer, a written price before work starts, and a 90-Day Done Right Promise in writing. Free estimates, no trip charge inside Tarrant County, and if another company gave you a written estimate, bring it to us for a free second opinion. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rendon and the surrounding area since 2001.