Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterTrusted Gate Installation for Grand Prairie Homeowners
A new gate in Grand Prairie should do three things: open when you want it to, stay closed when you don’t, and keep standing straight through every north Texas windstorm that rolls off Joe Pool Lake. Gatewood Fence & Gate has been installing driveway gates, pedestrian gates, and security gates across Grand Prairie since 2001, and we treat every gate installation in Grand Prairie like it’s going in front of our own shop on Main Street. Hal Gatewood answers the phone himself around the clock, quotes the price before the first post hole is dug, and stands behind every install with our 90-Day Done Right Promise in writing. Call (903) 829-4499 and you’ll get a real person, not a recording.
What Our Gate Installation Service Includes
We install every type of gate a Grand Prairie property needs, from a simple walk gate off the alley to a full double driveway gate with an opener. The difference with us is that the person measuring your posts is the same person welding them. Here’s what we install and how we approach each one.
Driveway Gate
A driveway gate does the heavy work on your property. It’s the first thing someone sees from the street and the last thing between your truck, your tools, and anybody walking by. Gatewood Fence & Gate installs single and double driveway gates sized to your actual opening, with posts set deep enough that a sagging gate never becomes your problem. We weld brackets on site and hang the gate so it swings level on day one and stays level in year five. If you’re replacing an old driveway gate in the Dalworth neighborhood, we’ll haul the old one off and make sure the new one matches the slope of your drive.
Pedestrian Gate
Most Grand Prairie backyards have a walk gate, and most of them are installed wrong from the start. A pedestrian gate needs a post that won’t lean, hinges that won’t bind, and a latch that a grandkid can work but a stray dog can’t. We build and hang pedestrian gates as standalone jobs or as part of a full fence run, and we check the swing path before we set anything in concrete. These gates take the most daily abuse on a property, so we use heavier hardware than the box stores sell. A pedestrian gate from us won’t drag on the ground by next spring.
Sliding Gate
Sliding gates make sense on Grand Prairie properties where a swing gate would block the driveway or fight the slope. Instead of swinging out, the gate rolls sideways on a track, which means the ground has to be right or the whole thing binds up. Gatewood Fence & Gate levels the track, sets the roller posts, and hangs the gate with clearance for the clay soil under Grand Prairie that shifts with every wet winter and dry summer. We also make sure the motor, if you’re adding one, is matched to the weight of the gate and mounted where it won’t get knocked loose by a mower.
Swing Gate
Swing gates are the classic Texas look, and they’re what most of our Grand Prairie customers picture when they call. A swing gate hangs on hinges and pivots on posts, and that means the hinge post is doing all the work. We don’t skip on post depth or concrete. On heavier gates we weld reinforcement into the frame before it’s ever hung, because a gate that sags in the middle started failing in the post. We install single swing gates for driveways and yards, and double swing gates for wider openings where one big panel would be too heavy to hold true.
Double Gate
A double gate is two panels meeting in the middle, and they have to meet exactly or the latch fights you every time. We set both posts, hang both panels, and adjust the reveal so the gap stays consistent from top to bottom. Double driveway gates in Grand Prairie often carry an opener on one side and a drop rod on the other, and we install both so they work together. If your old double gate has that telltale droop where the panels kiss, we’ll show you what the other company did wrong before we fix it right.
Security Gate
A security gate is a fence line that moves. It’s meant to stop a vehicle or a person who shouldn’t be there, and it has to look like it means it. We install reinforced frames, tamper-resistant hinges, and closers strong enough to bring the gate home even in a north wind. In Grand Prairie neighborhoods where alleys back up to busier streets, a locked security gate is the difference between your backyard and a shortcut. We’ll talk straight about what a security gate will and won’t do, and we won’t sell you a hotel-grade card reader if a good Mag lock and keypad are all you need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
When you have us install a BFT opener on your new driveway gate, you’re getting a motor we’ve mounted, wired, and adjusted on hundreds of jobs across Grand Prairie and the Mid-Cities. We stock BFT control boards and remotes so when the motor needs programming or a replacement part down the road, you’re not waiting on a box from somewhere in Tennessee. Hal knows these openers well enough to know what they do right and what they do wrong, and he’ll tell you before you buy which model fits your gate weight.
We also install Linear and Viking operators regularly, and both brands have earned their place on Texas gates. Linear makes an opener that holds up to sun and heat, which matters when your gate faces west off Pioneer Parkway. Viking swings heavy steel gates without complaining, and we mount them with the arm geometry set correctly so the opener never has to muscle through a bind. For simpler systems, Ghost Controls kits give you a reliable opener at a fair price, and we install them with the same care we give a commercial job. Whether your gate is running a BFT, a Viking, or any other make, we’ll install it right and stand behind it.
Signs You Need Gate Installation Right Now
- Your gate drags or won’t close at all. If you’re lifting the gate to swing it shut, you’re not using a gate anymore; you’re carrying it. A dragging gate is usually a failed post or a hinge that’s pulled away from the frame, and every week it drags, it’s doing more damage to the panel.
- The last company’s “fix” lasted less than a year. We see a lot of Grand Prairie gates that got a cheap hinge or a quick patch instead of the repair they actually needed. If the same gate has failed twice, it’s time to stop feeding it parts and install one built for the conditions it actually lives in.
- Your opener is fighting a gate that wasn’t hung for it. An opener installed on a gate that was never designed to carry one will burn through motors. We see openers fried because the gate was too heavy, the hinges were too tight, or the post was leaning just enough to force the operator to work double-time.
- The gate won’t secure, and you’ve got kids or dogs. A gate that pops open on its own isn’t a nuisance; it’s a hole in your fence. If the latch doesn’t catch, the gate drifts open, or the closer is too weak to pull it home, you’ve got a safety problem waiting on a distracted moment.
- You bought the house with a gate that’s not yours. A gate installed by a previous owner, a house flipper, or a handyman is a mystery. We can tell you in one visit whether it’s worth saving or whether you should start over with something built to fit this property, these posts, and the way you actually use the driveway.
Our Gate Installation Process - Step by Step
- 1
Measure and assess on site. Before anything is ordered or dug, we come out, measure the opening, check the ground slope, mark the utilities, and figure out what a gate this size actually needs. Hal doesn’t quote a gate over the phone without seeing the opening, because a driveway that looks flat from the street can drop three inches in the back.
- 2
Quoted price, in writing, before the work starts. You get the number before we touch a post hole. That price is the price. If we find something unexpected underground, we talk about it with you first, but the estimate doesn’t creep because somebody “misquoted” on the phone.
- 3
Posts set deep and plumb. The post is the foundation of the whole gate, so we go below the frost line and then some, and we use concrete where the soil type under your Grand Prairie property calls for it. A post that’s out of plumb by half an inch at the top is out by enough to wreck a gate by the bottom.
- 4
Gate built, hung, and trued. The panel is welded for straightness, hung on hinges sized for the weight, and adjusted until the reveal is even and the travel is smooth. We test the swing by hand before any opener goes on, because a gate that doesn’t swing right by hand will never work right under power.
- 5
Opener, hardware, and clean-up. If you’re adding an opener, it’s mounted after the gate is proven true, then run through full open-close cycles in front of you. We clean up the work area, haul off the old gate if there was one, and go over the 90-Day Done Right Promise with you before we leave.
How Much Does Gate Installation Cost in Grand Prairie?
A pedestrian gate install in Grand Prairie typically runs $400 to $1,100 depending on steel gauge, hardware, and post work. See our gate installation pricing for more detail. A single driveway gate with a welded steel frame and standard hardware usually lands between $1,500 and $4,500, while a double driveway gate with an opener starts around $4,000 and runs to $9,000 or more for heavier steel and automation. Sliding gates cost more than swing gates because the track and roller system add materials and labor. Security gates with reinforced frames, mag locks, and keypads start around $3,500 and climb based on the access control you choose.
What moves the price is not a mystery: the size of the opening, the weight of the gate, the condition of the existing posts or whether new ones go in, and whether you’re adding an opener and access control. Grand Prairie soil shifts with the seasons, so if we’re setting posts in an area with expansive clay, the concrete work has to be done right or the gate pays for it later. A cheap quote that skips the footer depth or uses light-gauge steel is the most expensive gate you’ll ever buy. Our estimates are free, in writing, and the price is agreed before any work starts. Call (903) 829-4499 and Hal will put a number in front of you based on your actual opening, not a generic square-foot formula.
Gate Installation Near Grand Prairie - Our Service Area
Gatewood Fence & Gate works all over south and central Dallas County and up into the Mid-Cities. If you’re searching for Gate Installation in Grand Prairie, you’ve found the shop that answers the phone in Grand Prairie, not a queue somewhere else. We also run regular jobs in Gate Installation in Irving and Gate Installation in Arlington, plus Duncanville, Cedar Hill, Mansfield, DeSoto, and Oak Cliff. Inside the county, there’s no trip charge, which means the estimate visit doesn’t cost you a dime before we’ve even done the work.
Serving Grand Prairie, TX - Our Local Coverage Area
We’re based in the Grand Prairie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Grand Prairie
Gate installation is the process of setting posts, building or hanging a gate panel, mounting hardware, and optionally adding an opener and access control so the gate works properly from day one. In Grand Prairie, proper installation means accounting for clay soil, wind load, and driveway slope, not just bolting a panel to whatever post was already there. At Gatewood Fence & Gate, installation includes measuring, post-setting, welding, hanging, adjusting, and cleanup, all done by our own crew with Hal on site. The result is a gate that opens smoothly and closes securely without being carried or muscled.
Most single driveway gates in Grand Prairie go from measure to finished install in about one to three weeks, depending on steel availability and whether we’re building a custom panel or working with a stock size. The on-site work itself is usually one to two days, including post concrete cure time where needed and opener wiring. Pedestrian gates can often be done in a single day from start to finish. When you call for a quote, we’ll give you a schedule that matches the job, not a generic “two weeks” that stretches into two months.
A pedestrian gate typically costs $400 to $1,100, a single driveway gate runs $1,500 to $4,500, and a double driveway gate with an opener starts around $4,000 and can go to $9,000 or more. Your actual price depends on opening size, steel weight, post work, and whether you’re adding automation or access control. We quote the exact number before any work starts, in writing, and the price doesn’t change at the door. Call (903) 829-4499 and we’ll come out and measure your opening for a free estimate.
Yes, we install and program BFT, Linear, Viking, and Ghost Controls gate openers on new gates across Grand Prairie. We stock OEM parts for these brands and we know the weight ratings, arm geometry, and programming quirks of each one. If you already have a brand preference, we’ll spec the right model for your gate weight and driveway layout. Hal services what he installs, so you won’t be handed off to a brand hotline if something acts up down the road.
If your gate is down and your property is open, we’ll make it a priority, but installation work is measured, ordered, and scheduled rather than rushed in a single day. A live person answers our phone 24 hours a day, 7 days a week, so you’ll know within one call when we can get there and what the path forward looks like. In the meantime, we can often brace or secure an existing gate so you’re not left open overnight. Call (903) 829-4499 and tell Hal what’s happening; he’ll give you an honest answer about timing.
Every installation from Gatewood Fence & Gate carries our 90-Day Done Right Promise in writing. If something isn’t done right, one call brings Hal back to make it right, no runaround and no fine print. We don’t hide behind “up to” or “in most cases.” Beyond the promise, we build gates that last because the post work is done properly the first time and the hardware is sized for the actual gate, not whatever was cheapest on the shelf. When the shop’s name is on the job, the answer to “is it covered?” is usually yes.
Before we arrive, clear the area around the gate opening: move vehicles out of the driveway, trim back any brush that’s grown over the posts, and unlock any padlock that’s hanging on the old gate. If you have dogs, have them inside or secured so the work can proceed without a gate that’s open and a dog that’s interested. Know where your property line sits if the gate is near a shared fence, because that’s where the posts should go regardless of where the old gate was. We’ll handle the rest, including haul-off of the old gate and any concrete we cut out.
Schedule Your Gate Installation Service in Grand Prairie Today
If your Grand Prairie gate is sagging, binding, or gone entirely, don’t wait until it fails on a morning you’re already late. Call (903) 829-4499 and you’ll get Hal or someone from his crew on the line, 24/7, ready to schedule a free, no-obligation estimate at your property. The price gets quoted before the work starts, in writing, and the 90-Day Done Right Promise is on every job. The name is on the shop, and the shop is down the road; that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie since 2001.