Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair Services in Cedar Hill, TX
The escarpment that runs through Cedar Hill isn’t just a scenic rise. It’s the reason your gate post leans a little more each spring, and why the operator that works fine in DeSoto overheats up here in July. We work on gates all over Cedar Hill, from the brick subdivisions off Belt Line Road to the limestone lots near Cedar Hill State Park, and we know which problems show up where. Hal Gatewood owns Gatewood Fence & Gate, he’s been fixing gates since 2001, and he answers his own phone. Call (903) 829-4499 and you’ll get a person, not a menu.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Cedar Hill Homeowners Choose Gatewood Fence & Gate
People in Cedar Hill don’t call us because they saw a billboard. They call because a neighbor in Lake Ridge or High Pointe watched Hal weld a snapped hinge back onto a driveway gate and said, “That guy actually fixed it.” That’s what we do. The name on the shop is the name on the invoice, and Hal Gatewood’s shop address is published for anyone who wants to drive by and look him in the eye. We’ve been owner-operated since 2001, and the 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, one call brings him back. No runaround, no re-diagnosis fee, no fine print.
Gate Repair Services We Offer in Cedar Hill
Gate Repair
A sagging gate in Cedar Hill usually isn’t a hinge problem. It’s a post problem, and it starts in the Blackland Prairie clay that swells and shrinks all year. We repair the post, the hinge, the frame, and the panel on site. Learn more about our Gate Repair in Cedar Hill.
Gate Installation
New gate work in Cedar Hill means accounting for that escarpment grade before we dig the first hole. A swing gate needs arc compensation on a sloped driveway, and that changes the operator spec and the hinge geometry. We price it right the first time. Learn more about our Gate Installation in Cedar Hill.
Gate Motor & Opener
July and August are hard on gate operators in Cedar Hill. An unshaded metal enclosure can hit 140 degrees, and that’s when circuit boards and battery backups start failing. We service and replace motors from BFT, Linear, and Ghost Controls among others. Learn more about our Gate Motor & Opener in Cedar Hill.
Gate Access Control
Subdivision entrances and gated communities across Cedar Hill run on access control systems that have to work every time. Keypad, intercom, loop detector, or telephone entry, we handle the wiring and the programming. We’re certified on DoorKing and Elite systems, and Hal’s crew does the work correctly with uniformed, background-checked techs on every job.
Gate Parts & Welding
We weld on site, in your driveway, so your gate stays where it is. Pickets, hinges, frames, post caps. If it’s made of steel or ornamental iron, we can fix it without hauling it off to a shop. That’s the difference between a repair-first company and one that wants to sell you a whole new gate.
Neighborhoods We Serve in Cedar Hill
We run calls all over Cedar Hill, and we know the neighborhoods by the way they build, not just by map. Typical response time is same-day or next-day for non-emergency repair calls, and 24/7 for emergencies.
- Lake Ridge
- High Pointe
- Waterford Oaks
- Kingswood
- Meadows of Cedar Hill
Why Cedar Hill’s Climate & Housing Affect Gate Repair
Cedar Hill sits on the highest elevated landmass in the southern DFW Metroplex, and that elevation changes how gates fail. The grade coming down off the Balcones Escarpment means a lot of driveways weren’t poured level, so a swing gate that worked fine when installed can start dragging within a couple of years if the hinges were set without accounting for arc. We reset hinge pins, add j-bolts, and install operators configured for incline, not just whatever the box says. The clay soil in the lower and eastern sections of town heaves with spring rain and cracks open in summer drought, which racks gate frames out of square and tilts posts out of plumb on a near-seasonal cycle. Over near the state park and the upper western neighborhoods, a post hole hits limestone inside 18 inches, and a crew that’s never worked the escarpment will underbid the job and then either abandon it or bill you for the drill rig afterward. We already know the drill rig is coming, and we price it in.
The housing stock tells the same story. Most of Cedar Hill’s subdivisions went up in the 1990s and 2000s, and those ornamental iron driveway gates are now 15 to 25 years old. That’s when the first full replacement cycle hits: operators, hinges, surface-corroded pickets, posts that were set shallow in clay and never stood a chance. We see it every week in neighborhoods like Waterford Oaks and Kingswood, where the original builder-grade gates are finally giving out all at once.
Pricing for Gate Repair in Cedar Hill
- Hinge or bracket repair: $120-$250 depending on weight and access
- Post stabilization or reset: $200-$450, more if the post needs replacing in bedrock
- Gate operator replacement: $650-$1,400 installed, brand and horsepower dependent
- Access control add-on (keypad/intercom): $350-$800 per entry point
- On-site welding (pickets, frame, hinge plates): $150-$400 typical
$40 off any repair over $200. Free second opinion on any written estimate. No trip charge inside the county. Seniors and veterans get 10% off, permanently. Call (903) 829-4499 for an exact quote. Estimates are free.
Service Area - Cities Near Cedar Hill
We work across the southern DFW corridor, and Cedar Hill is home base for a lot of our calls. If you’re in DeSoto, Duncanville, Mansfield, or Arlington, we’ll come to you too.
Serving Cedar Hill, TX - Our Local Coverage Area
We’re based in the Cedar Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Cedar Hill
Most Cedar Hill gate repairs land between $150 and $450, with operator replacements running $650 to $1,400. We quote the full price upfront, in writing, before any work starts, and the price doesn’t change at the door. $40 off any repair over $200, and estimates are free. Call (903) 829-4499 to get an exact number for your gate.
For emergency calls like a gate that won’t close or a post that’s about to drop a panel into the driveway, yes. We run 24/7 for emergencies, and a live person answers the phone no matter when you call. For non-emergency repairs, typical response is same-day or next-day. Call (903) 829-4499 and Hal will tell you when he can be there.
Yes. Every operator installation or replacement we do includes the power run to code, proper grounding, and safety edges that actually reverse the gate when something’s in the way. We’ll also check your existing photo eyes and loops if you’re having intermittent close problems. Call (903) 829-4499 for a full assessment.
The clay soil under Cedar Hill swells in spring and shrinks in summer, which moves posts just enough to rack the frame and throw the gate off its track or out of plumb. We reset the post and re-square the frame, then set the operator for the actual conditions, not the printed spec. Call (903) 829-4499 and we’ll find where the movement is coming from.
Most of the time we can repair what you have, especially if it’s ornamental iron from the 90s or 2000s with good bones. If the post is rotted or the panel is rusted through at the welds, we’ll show you what we’re seeing and give you a repair price and a replacement price side by side. You pick. Call (903) 829-4499 for an honest assessment.
Contact Gatewood Fence & Gate in Cedar Hill
Call (903) 829-4499 for a free estimate on gate repair in Cedar Hill. You’ll get Hal or one of his crew on the phone, not an answering service. We’re locally owned, owner-operated, and our name is on the shop. The 90-Day Done Right Promise comes in writing, and if something isn’t right, we make it right. Before you call a national company or a handyman who’s never seen a sloped escarpment driveway, call the person who’s been fixing gates since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cedar Hill and the southern DFW Metroplex since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cedar Hill Customers Say
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo