Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair Services in Ovilla, TX
If your automatic gate is groaning, sagging, or refusing to open in Ovilla, the fix usually starts underground, not in the motor. Gate repair in Ovilla typically runs $180 to $340 for common operator and alignment work, and most jobs are completed in one visit by a local tech who knows Ellis County clay when he sees it. Call Gatewood Fence & Gate at (903) 829-4499 and a live person answers, any hour, any day. No voicemail tree, no call center three states away. Just a real answer and an honest window for when we’ll be there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Ovilla Homeowners Choose Gatewood Fence & Gate
Ovilla isn’t a place where you want to gamble on an anonymous repair outfit. You live here because you wanted space, quiet, and neighbors you actually know. Hal Gatewood has been at this since 2001, and his name is on the shop and on every invoice. He publishes his address. His license number is there for anyone to look up. The person who answers the phone at 2 a.m. when your gate won’t close is the same person who will show up in your driveway.
We work regularly in neighborhoods like Cedar Ridge and Oak Tree Estates, where long private drives and ornamental swing gates are standard. Homeowners tell us the same story: another company quoted one price over the phone and a different one at the door. That doesn’t happen here. The price is quoted and agreed before any work starts, in writing. Every job carries our 90-Day Done Right Promise. If it’s not done right, one call brings Hal back. No runaround, no fine print.
Gate Repair Services We Offer in Ovilla
Gate Repair
A gate that sags in the hinge post, not in the middle, is where real repair starts. We weld on site in your driveway, fix the actual problem, and don’t swap parts that don’t need swapping. If your gate is dragging, leaning, or binding, we find the cause and repair it rather than recommending a full replacement. Learn more about our Gate Repair in Ovilla.
Gate Installation
New gates on Ovilla acreage need footers poured for expansive clay, which means setback and depth matters more than it would on sandy soil. We handle custom and semi-custom installations, measured and scheduled properly, with a free measure and a written price before any commitment. Learn more about our Gate Installation in Ovilla.
Gate Motor & Opener
Older LiftMaster and Linear operators from the late 1990s and 2000s are reaching the end of their usable life all across Ovilla. We service and replace motors, limit switches, receiver boards, and battery backups, and we carry parts for the brands most common on Ellis County properties. Learn more about our Gate Motor & Opener in Ovilla.
Gate Access Control
Keypads, telephone entry, vehicle loop detectors, intercoms, and remote programming. If your gate opens for the trash service but not the school bus, or the keypad works only when it rains (which means it’s shorting), that’s access control work. We diagnose first, then repair or replace only what failed.
Gate Parts & Welding
Broken hinge, cracked pipe rail, rusted post cap, bent operator arm? We weld on site so the gate never leaves your property. Hal has been welding since before automatic gates were common in Ovilla, and he carries stock steel and common hardware in the truck for most repair calls.
Neighborhoods We Serve in Ovilla
We cover all of Ovilla, including the acreage estates along Ovilla Road, the custom homes tucked back in the tree lines, and the smaller ranchettes that still feel like old Ellis County. Typical response time for the Ovilla area is same day or next morning, depending on what time you call.
- Cedar Ridge
- Oak Tree Estates
- Meadow Creek Estates
- Ovilla Road corridor
- Westmoreland Road acreage
Why Ovilla’s Climate & Housing Affect Gate Repair
Ovilla sits on Blackland Prairie expansive clay. That’s not a footnote. That’s the reason most gate repair calls here are not actually motor failures. When the clay gets wet, it swells. When summer hits and the ground dries out, it shrinks and cracks. Your gate posts, set in concrete footers, move with that cycle. A wood or concrete post can cant two to three inches out of plumb over a single wet season. A gate that “won’t close fully” or “catches at the latch” is often just a post that has walked, and the operator is fighting bad geometry. Show me the gate closing on its own and I’ll show you where it’s failing.
This is more severe in Ovilla than in the sandy-soil communities north and east of here. The February 2021 freeze taught a lot of Ovilla homeowners that an exposed operator board or battery backup unit will fail exactly when you need it most. We find and fix those failures using parts meant for outdoor Texas exposure, not indoor-rated boards installed by someone who never checked the seal.
Ovilla’s identity as an intentionally low-density community plays a part, too. The city resisted dense subdivision for decades, which means automatic driveway gates are essentially standard residential infrastructure here, not a luxury upgrade. Many of those systems date from the late 1980s through the 2000s and are now showing aging motor, hinge, and post issues all at once. A repair-first approach saves Ovilla homeowners thousands compared to a replacement-first sales pitch.
Pricing for Gate Repair in Ovilla
Honest numbers, no smoke. Most gate repairs in Ovilla fall in these ranges:
- Operator or limit switch repair: $180 - $340
- Post reset and re-pour (single post): $400 - $800, depending on depth and concrete work
- Hinge or weld repair on site: $150 - $300
- Full operator replacement (box, board, arm): $700 - $1,400 installed
- Access control repair (keypad, loop, intercom): $150 - $450
These are ranges, not guarantees. The price you get is quoted in writing before any work begins, and it’s the price you pay. No trip charge inside the county. $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for an exact figure on your gate.
Service Area - Cities Near Ovilla
We serve Ovilla and the surrounding North Texas communities. Crews from our Dallas-Fort Worth office also cover Grand Prairie, Irving, Arlington, and Duncanville for gate repair, installation, motor, and access control work.
Serving Ovilla, TX - Our Local Coverage Area
We’re based in the Ovilla area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Ovilla
Most gate repairs in Ovilla run between $180 and $340 for common operator, limit switch, and alignment work, with post resets running higher due to the clay soil. You’ll get a written price before work starts, and that’s the price you pay. Call (903) 829-4499 for a free estimate on your specific gate.
In most cases, yes. We schedule same-day or next-morning service in Ovilla depending on when you call. Emergency calls, like a gate stuck open or a closed gate that won’t let you out, jump the line. Call (903) 829-4499 and a live person will tell you the real window.
Blackland Prairie clay expands when wet and shrinks hard in drought, which slowly walks gate posts out of plumb. Fix the panel without the post and you’ll fix it twice. We reset the post with a deeper footer and proper drainage so it stays put through wet and dry cycles.
We service and repair gate operators from Linear, Viking, Ghost Controls, and DoorKing, among others. If you’re not sure what brand you have, describe the motor or take a photo and call (903) 829-4499. We’ll likely tell you the brand over the phone.
A full gate installation includes site measurement, footer excavation and pour, post set, gate hang, operator install, safety edges and photo eyes, and programming of remotes and keypads. We also handle the power run from your panel to the operator location. The price is measured and quoted in writing before any commitment.
Yes. We run the low-voltage and line-voltage power to the operator, install the safety edges and photo eyes required by code, and test everything before we leave. Power and safety equipment on a gate are not a DIY project. If a gate can crush someone, a trained professional should wire it.
Call Gatewood Fence & Gate in Ovilla
A gate sags in the hinge post, not in the middle, and that is where we start. Hal has been fixing gates since 2001, welding on site, and standing behind every job with a 90-Day Done Right Promise. His name is on the shop, the shop is down the road, and the phone is answered by a live person 24/7. If you’re in Ovilla and your gate is failing, call (903) 829-4499 for a free estimate. You’ll get a written price before any work starts. No trip charge inside the county. No haggling. Just the gate fixed right the first time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Ovilla and surrounding communities since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ovilla Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg