Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arlington
Gate repair in Arlington usually means one of three things: a hinge post heaved out of plumb by black-clay soil, an operator board fried by a hard freeze or a 105-degree afternoon, or a 25-year-old ornamental iron gate that never had modern safety edges to begin with. We fix all three, most in a single visit. Hal Gatewood has been doing this since 2001, and the person who shows up at your Arlington driveway is the same person whose name is on the invoice. Call (903) 829-4499 and you’ll get a live person, not a voicemail tree.
Why Gatewood Fence & Gate Is Arlington’s Preferred Gate Repair Company
Arlington isn’t a stop on our route. It’s home to the kind of work we do best: 1980s and 1990s ornamental iron gates on brick-and-iron subdivisions that are now reaching the end of their original hardware’s life. We know the HOA entrances off Green Oaks Boulevard, the master-planned streets near Viridian, and the older ranch-style lots around Fielder and Park Row where a sagging driveway gate is usually a hinge post problem, not a gate panel problem.
What Arlington homeowners tell us they want is simple: a name they can verify, a price that doesn’t change at the door, and a repair that stays repaired. That’s what we do. Every job gets the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no fine print.
We also answer the phone 24/7. Not a call center. The actual shop. Try it at 2 a.m. if you want. A live person picks up.
Our Gate Repair Services in Arlington
Electric Gate Repair
Arlington summers regularly push past 105 degrees, and that heat is brutal on gate operator control boards mounted in unshaded metal enclosures. We replace capacitors, relays, and entire boards on BFT, Linear, and Viking operators in Arlington driveways every week from June through September. We also fix wiring where UV has cracked the insulation and caused intermittent faults. Same-day service is available for most electric gate failures.
Automatic Gate Repair
Automatic gates in Arlington fail in patterns. After a hard freeze, hydraulic actuators crack and keypad entry systems go dark, especially on older HOA gates that were never winterized. In summer, thermal binding makes metal gates stick in their frames by midday. We diagnose the actual cause before replacing parts, because swapping an operator arm without checking the post alignment just means you’ll call us again in three months. That’s not how we work.
Hinge & Post Repair
This is the single most common call we run in Arlington, and it traces back to one thing: North Texas black clay. That soil swells when it rains and shrinks in drought, heaving gate posts out of plumb in a cycle that never stops. When a post leans, the gate sags, the hinge welds strip, and the latch stops lining up. We dig out the old footing, reset the post in concrete, and reweld the hinges on site. The gate stays in your driveway the whole time, which matters when it’s a 300-pound ornamental iron swing gate.
Gate Realignment
A gate that drags on the concrete or won’t close in the afternoon heat is usually a realignment job. In Arlington, we see it most on cedar-board fence frames with iron gate inserts. The wood shrinks and warps through our wet-dry cycles, loosening the hardware and pulling the gate out of square. We shim, adjust, and re-hang so the gate swings or slides true again. It’s often a two-hour fix that saves you from replacing a perfectly good gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
We’re certified to service nine major gate brands, including BFT, Linear, Viking, and Ghost Controls. If your Arlington gate has a LiftMaster from the 1990s or a Viking operator installed on an HOA entrance, we’ve likely worked on the same model that same week. We keep common parts stocked locally, so we’re not waiting on a shipment from three states away when your gate is stuck open. That local parts stock matters. A family off Cooper Street shouldn’t have to leave their driveway unsecured for a week because a limit switch failed.
Common Gate Repair Problems We See in Arlington Homes
- Hinge posts heaving out of plumb. Black-clay soil swells every wet season and drops every drought. Over a 20-year span, that cycle racks the gate frame and strips hinge welds. We reset the post and reweld the hinges rather than telling you to buy a new gate.
- Post-freeze operator failures. After Winter Storm Uri in February 2021, Arlington’s gated communities lost hydraulic actuators and keypad systems en masse. Hard freezes are rare here, so nobody winterizes, and the damage hits all at once. We now stock extra cold-weather operator kits year-round.
- Thermal binding on south-facing gates. When Arlington hits 105 degrees, a black iron gate absorbs enough heat to expand and bind in its frame. If your gate closes fine at 8 a.m. and sticks at 3 p.m., that’s thermal binding. We adjust clearances and realign so it swings free all day.
- Legacy operators without safety edges. Gates installed before modern safety photocell requirements are common in Arlington’s 1980s and 1990s subdivisions. We retrofit them with current-sensing edges and photocells so they meet today’s safety standards without replacing the whole operator.
Pricing for Gate Repair in Arlington, TX
Here’s what you can expect to pay in Arlington for common repairs. Hinge and post reset typically runs $275 to $550, depending on whether the post needs a full concrete footing or just a re-plumb and reweld. Gate realignment and sag correction usually lands between $180 and $380. Electric gate repair, including board or capacitor replacement, ranges from $225 to $475. Automatic gate operator repair on brands like Viking or Linear typically runs $300 to $650 when the operator can be repaired, and a full operator replacement is $800 to $1,400 installed. The price you’re quoted is the price you pay, agreed before any work starts. You’ll also get $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 and we’ll give you a firm number over the phone.
We Also Serve Cities Near Arlington
Our Gate Repair crew works throughout the Arlington area and the surrounding communities. If you’re in Mansfield, Kennedale, Cedar Hill, or Grand Prairie, the same local team covers those neighborhoods. You get the same upfront pricing and the same 90-Day Done Right Promise, whether you’re off I-20 in Arlington or just south of the county line. For gate repair in Arlington, call us directly and we’ll be there.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Arlington
Arlington’s black clay expands when it gets wet and contracts during drought, which slowly pushes gate posts out of alignment over years of wet-dry cycles. That’s why we see so many sagging gates in this city where the post, not the gate panel, is the actual problem. The fix is digging out the old footing, resetting the post in concrete, and rewelding the hinges. Call (903) 829-4499 for a free estimate.
Yes, and we do it regularly in Arlington’s older subdivisions. A 1990s LiftMaster can almost always be retrofitted with current-sensing safety edges and photocells rather than replacing the whole operator. It brings the gate up to modern safety standards for a fraction of replacement cost. We’ll give you a straight answer on whether your specific unit is worth retrofitting or if replacement is the cheaper move over five years. Call (903) 829-4499 and we’ll talk through it.
Hard freezes in Arlington are rare enough that few homeowners winterize their gate systems, so when temperatures drop into the teens, hydraulic actuators crack and keypad entry systems fail en masse. This happened citywide after Winter Storm Uri in 2021. If your opener went dark after a freeze, the fix usually involves replacing the actuator or the keypad control board. We stock cold-weather kits year-round now because we know the pattern. Call (903) 829-4499 for same-day diagnosis.
Yes. Slide gates on Arlington’s older HOA properties, especially those installed in the 1980s and 1990s, run on rack and pinion systems that wear unevenly when the gate track settles into the black clay. If the rack teeth are worn on one section, the gate jerks or stalls mid-travel. We check the rack alignment and adjust the pinion engagement, which often avoids a full rack replacement. Call (903) 829-4499 and we’ll inspect it before recommending anything.
In most Arlington cases, sag correction is worth it. A 25-year-old ornamental iron gate is usually built from material that’s thicker than what’s sold today, and the sag is coming from the post, not the gate itself. If the post is reset and the hinges rewelded, that gate will swing true for another decade. Replacement only makes sense when the gate panels themselves are rusted through or the frame is cracked from years of racking. We’ll tell you which one you’re dealing with, and we’ll show you the evidence. Call (903) 829-4499 for an honest assessment.
Key Takeaways
- Arlington’s black-clay soil heaves hinge posts out of plumb every wet season, making post reset the most common gate repair here.
- We service BFT, Linear, Viking, Ghost Controls, LiftMaster, and four other major brands, with parts stocked locally.
- Upfront pricing, agreed before work starts. $40 off any repair over $200, no trip charge inside the county, 10% off for seniors and veterans.
- 90-Day Done Right Promise in writing on every job. Hal Gatewood’s name is on the shop and on the invoice.
- Live person answers every call, 24/7. Call (903) 829-4499.
Contact Gatewood Fence & Gate in Arlington
If your gate is sagging, sticking, or won’t open, call (903) 829-4499 for a free estimate. We’ll give you a firm price over the phone, and if you want a second opinion on a written estimate from another company, that’s free too. You can drive to the shop and look Hal in the eye, or you can call and he’ll be at your Arlington driveway when he says he will. The gate stays in your yard, the welding happens on site, and the work is guaranteed for 90 days in writing. That’s the old way of doing business, and it still works in Arlington.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.